Content for TS 45.008 Word version: 18.0.0
4 RF power control
5 Radio link failure
6 Idle mode tasks
7 Network pre-requisites
8 Radio link measurements
9 Control parameters
4 RF power control p. 14
4.1 Overall process p. 14
4.2 MS implementation p. 14
4.2.1 General |R13| p. 14
4.2.2 (EC-)RACH |R13| p. 15
4.3 MS power control range p. 17
4.4 BSS implementation p. 17
4.5 BSS power control range p. 18
4.6 Strategy p. 18
4.7 Timing p. 18
4.7.1 Normal Power Control |R5| p. 18
4.7.2 Fast Power Control |R5| p. 18
4.7.3 Enhanced Power Control |R5| p. 19
4.8 Dedicated channels used for a voice group call or voice broadcast p. 19
5 Radio link failure p. 19
6 Idle mode tasks p. 20
6.1 Introduction p. 20
6.2 Measurements for normal cell selection p. 22
6.3 Measurements for stored list cell selection p. 23
6.4 Criteria for cell selection and reselection p. 23
6.4.1 C1 path loss criterion |R13| p. 23
6.4.2 C2 reselection criterion |R13| p. 25
6.4.3 C4 criteria |R13| p. 26
6.4.4 Disabling of EC operation |R13| p. 26
6.5 Downlink signalling failure p. 26
6.6 Measurements for Cell Reselection p. 27
6.6.0 General |R13| p. 27
6.6.1 Monitoring of received signal level and BCCH data p. 27
6.6.1.1 Applicability |R13| p. 27
6.6.1.2 Monitoring of received signal level |R13| p. 27
6.6.1.3 Monitoring of BCCH data and BSIC decoding |R13| p. 28
6.6.1.4 Determination of available PLMNs |R13| p. 28
6.6.1.5 Requirements for synchronization and reading of BCCH data |R13| p. 29
6.6.1a Reduced Monitoring of received signal level and (EC-)BCCH data |R13| p. 29
6.6.1a.1 General p. 29
6.6.1a.2 Monitoring of the serving cell p. 29
6.6.1a.3 Criteria for triggering measurements for cell re-selection p. 30
6.6.1a.4 Monitoring of non-serving cells p. 30
6.6.2 Path loss criteria and timings for cell re-selection p. 31
6.6.3 Cell reselection algorithm for SoLSA p. 32
6.6.4 Measurements on cells of other radio access technologies p. 33
6.6.5 Algorithm for cell re-selection from GSM to UTRAN based on cell ranking p. 37
6.6.6 Algorithm for inter-RAT cell re-selection based on priority information |R8| p. 38
6.6.7 Cell selection and re-selection to CSG cells and hybrid cells |R8| p. 40
6.7 Release of TCH, SDCCH and DBPSCH p. 42
6.7.1 Normal case p. 42
6.7.2 Call re-establishment p. 43
6.8 Abnormal cases and emergency calls p. 43
6.9 RLA_EC signal level and SLA measurements |R13| p. 44
6.9.1 General p. 44
6.9.2 Physical parameters p. 44
6.9.3 Statistical parameter p. 44
6.9.4 Accuracy requirements p. 45
6.9.5 Void
6.9a RLA_GC signal level measurements |R13| p. 45
6.9a.1 General p. 45
6.9a.2 Physical parameter p. 45
6.9a.3 Statistical parameter p. 45
6.9a.4 Accuracy requirements p. 45
6.10 Coverage class selection for EC-GSM-IoT |R13| p. 46
7 Network pre-requisites p. 48
7.1 BCCH carriers p. 48
7.2 Identification of surrounding BSS p. 49
7.2.1 General |R13| p. 49
7.2.2 Identification of surrounding BSS for handover measurements |R13| p. 50
7.3 Handover measurements on other radio access technologies p. 51
7.4 Handover measurements on UTRAN CSG cells and hybrid cells |R9| p. 55
8 Radio link measurements p. 55
8.1 Signal level p. 56
8.1.1 General p. 56
8.1.2 Physical parameter p. 56
8.1.3 Statistical parameters p. 57
8.1.4 Range of parameter p. 57
8.1.5 Measurement quantity for other radio access technologies p. 58
8.1.5.1 UTRAN FDD p. 58
8.1.5.2 UTRAN TDD p. 58
8.1.5.3 cdma2000 p. 58
8.1.5.4 E-UTRAN FDD |R8| p. 58
8.1.5.5 E-UTRAN TDD |R8| p. 59
8.2 Signal quality p. 60
8.2.1 General p. 60
8.2.2 Physical parameter p. 60
8.2.3 Statistical parameters p. 60
8.2.3.1 RXQUAL |R5| p. 60
8.2.3.2 MEAN_ BEP and CV_BEP |R5| p. 61
8.2.4 Range of parameter RXQUAL p. 62
8.2.5 Range of parameters MEAN_BEP and CV_BEP p. 63
8.3 Aspects of discontinuous transmission (DTX) p. 67
8.4 Measurement reporting p. 68
8.4.1 Measurement reporting for the MS p. 68
8.4.1a Measurement reporting for the MS in FPC mode |R5| p. 70
8.4.1b Measurement reporting for the MS in EPC mode |R5| p. 70
8.4.2 Measurement reporting for the MS on a SDCCH p. 71
8.4.3 Additional cell reporting requirements for multi band MS p. 71
8.4.4 Common aspects for the MS on a TCH, a SDCCH or a DBPSCH p. 72
8.4.5 Measurement reporting for the BSS p. 72
8.4.6 Extended measurement reporting p. 73
8.4.7 Additional cell reporting requirements for multi-RAT MS p. 73
8.4.8 Enhanced Measurement Reporting p. 75
8.4.8.1 Reporting Priority p. 75
8.4.8.2 Measurement Reporting p. 76
8.4.8.3 NBR_RCVD_BLOCKS for FLO |R6| p. 77
8.4.9 Requirements for measurement and reporting of CSG cells and hybrid cells |R9| p. 77
8.5 Absolute MS-BTS distance p. 78
8.5.1 General p. 78
8.5.2 Physical parameter p. 78
9 Control parameters p. 79
