Content for TR 38.840 Word version: 16.0.0
2 References
3 Definitions, symbols and abbreviations
4 Introduction
5 UE power saving schemes
6 Higher layer procedure for UE power saving
7 Conclusions
8 Appendix - Evaluation methodology
$ Change History
2 References p. 5
3 Definitions, symbols and abbreviations p. 8
4 Introduction p. 9
5 UE power saving schemes p. 10
5.1 UE adaptation to the traffic and power consumption characteristic p. 10
5.1.1 Adaptation to the variation in frequency p. 10
5.1.2 Adaptation to the variation in time p. 13
5.1.3 Adaptation to number of antenna p. 17
5.1.4 Adaptation to DRX operation p. 19
5.1.5 Adaptation to achieve reducing PDCCH monitoring/decoding p. 26
5.1.6 UE assistance Information p. 34
5.2 Power saving signal/channel/procedure for triggering adaptation to UE power consumption p. 34
5.2.1 Power saving signal/channel p. 34
5.2.2 Power saving procedure p. 38
5.2.3 Additional RS p. 38
5.3 Power consumption reduction in RRM measurements p. 39
6 Higher layer procedure for UE power saving p. 55
6.1 UE paging procedure based on power saving signal/channel/procedure p. 55
6.2 UE power saving procedure in transition from RRC_CONNECTED to RRC_IDLE/RRC_INACTIVE state p. 55
6.3 Higher layer procedures for the UE power saving schemes in RRC_CONNECTED p. 55
6.4 Higher layer procedures for power consumption reduction in RRM measurements p. 55
7 Conclusions p. 55
8 Appendix - Evaluation methodology p. 57
8.1 UE power consumption model p. 57
8.1.1 UE power consumption model for FR1 p. 57
8.1.2 UE power consumption model for FR2 p. 59
8.1.3 UE power consumption scaling for adaptation p. 60
8.1.4 UE power consumption model for RRM measurements p. 63
8.2 Simulation assumptions p. 64
$ Change History p. 70
