Content for TR 38.831 Word version: 16.1.0
1 Scope
2 References
3 Definitions of terms, symbols and abbreviations
3.1 Terms
3.2 Symbols
3.3 Abbreviations
...
...
1 Scope p. 6
The present document is technical report for NR RF Requirement Enhancements for FR2 WI.
2 References p. 6
The following documents contain provisions which, through reference in this text, constitute provisions of the present document.
- References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific.
- For a specific reference, subsequent revisions do not apply.
- For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document.
3 Definitions of terms, symbols and abbreviations p. 6
3.1 Terms p. 6
For the purposes of the present document, the terms given in TR 21.905 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905.
3.2 Symbols p. 6
For the purposes of the present document, the following symbols apply:
Fs
Frequency separation class
Fsd
Frequency separation class for DL-only spectrum
ΔMBP,n
Reference sensitivity relaxation parameter
ΔMBS,n
EIS spherical coverage relaxation parameter
3.3 Abbreviations p. 6
For the purposes of the present document, the abbreviations given in TR 21.905 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905.
ADC
Analog to digital converter
AoA
Angle of arrival
BC
Beam correspondence
CA
Carrier aggregation
CBW
Channel bandwidth
CC
Component carrier
CSI-RS
Channel State Information Reference Signal
DL
Downlink
EIRP
Effective Isotropic Radiated Power
EIS
Effective Isotropic sensitivity
EVM
Error vector magnitude
FR2
Frequency range 2
LO
Local oscillator
MBR
Multiband relaxation
MOP
Maximum output power
NZP CSI RS
Non zero power CSI-RS
OBW
Occupied bandwidth
PBCH
Physical Broadcast Channel
PDCCH
Physical Downlink Control Channel
PDSCH
Physical Data Shared Channel
PRB
Physical resource block
PSD
Power spectral density
RRM
Radio resource management
RSRP
Reference signal received power
SCS
Sub-carrier spacing
SMTC
SSB-based RRM Measurement Timing Configuration
SNR
Signal to noise ratio
SSB
Synchronization Signal Block
UE
User equipment
UL
Uplink
QCL
Quasi co-located
