Content for TR 38.813 Word version: 15.0.0
2 References
3 Definitions, symbols and abbreviations
4 Background
5 NR Frequency band definition
6 Band numbering and channel bandwidth
6.1 Band numbering
6.2 Channel bandwidth
7 NR band 3.3GHz - 3.8GHz specific issues
7.1 UE specific
7.2 BS specific
8 NR band 3.3GHz - 4.2GHz specific issues
8.1 UE specific
8.2 BS specific
9 Required changes to NR, E-UTRA, UTRA and MSR specifications
$ Change History
2 References p. 6
3 Definitions, symbols and abbreviations p. 6
4 Background p. 7
5 NR Frequency band definition p. 7
6 Band numbering and channel bandwidth p. 7
7 NR band 3.3GHz - 3.8GHz specific issues p. 8
7.1 UE specific p. 8
7.1.1 Transmitter characteristics p. 8
7.1.1.1 UE maximum output power p. 8
7.1.1.2 UE maximum output power for modulation / channel bandwidth p. 9
7.1.1.3 UE maximum output power with additional requirements p. 9
7.1.1.4 Adjacent Channel Leakage Ratio (ACLR) p. 10
7.1.1.5 Spectrum emission mask p. 10
7.1.1.6 Spurious emissions p. 10
7.1.1.7 Tx requirements for UL MIMO with PC2 p. 11
7.1.1.7.1 UE maximum output power p. 11
7.1.1.7.2 Configured transmitted power p. 11
7.1.1.7.3 Minimum output power p. 12
7.1.1.7.4 Transmit OFF power p. 12
7.1.1.7.5 ON/OFF time mask p. 12
7.1.1.7.6 Power control p. 12
7.1.1.7.7 Frequency error for UL-MIMO p. 13
7.1.1.7.8 Transmit modulation quality p. 13
7.1.1.7.9 Occupied bandwidth for UL-MIMO p. 13
7.1.1.7.10 Out of band emission for UL-MIMO p. 13
7.1.1.7.11 Spurious emission for UL-MIMO p. 13
7.1.1.7.12 Transmit intermodulation for UL-MIMO p. 13
7.1.1.7.13 Time alignment error for UL-MIMO p. 14
7.1.2 Receiver characteristics p. 14
7.1.2.1 Reference sensitivity p. 14
7.1.2.2 Adjacent Channel Selectivity (ACS) p. 15
7.1.2.3 Blocking p. 17
7.1.2.4 Rx requirements for UL MIMO with PC2 p. 18
7.1.2.4.1 Reference sensitivity level p. 18
7.1.2.4.2 Maximum input level p. 18
7.1.2.4.3 ACS p. 18
7.1.2.4.4 Blocking p. 18
7.1.2.4.5 Spurious response p. 18
7.1.2.4.6 Receiver intermodulation p. 19
7.1.2.5 4Rx requirements p. 19
7.2 BS specific p. 19
7.2.1 Operating band unwanted emissions p. 19
7.2.1.1 Minimum requirement for BS type 1-C and BS type 1-H p. 19
7.2.1.2 Minimum requirement for BS type 1-O p. 20
7.2.2 Additional spurious emissions requirements p. 20
7.2.2.1 Minimum requirement for BS type 1-C and BS type 1-H p. 20
7.2.2.2 Minimum requirement for BS type 1-O p. 20
7.2.3 Co-location with other base stations p. 20
7.2.4 General blocking requirement p. 21
7.2.4.1 Minimum requirement for BS type 1-C and BS type 1-H p. 21
7.2.4.2 Minimum requirement for BS type 1-O p. 21
7.2.5 Blocking requirement for co-location with other base stations p. 21
8 NR band 3.3GHz - 4.2GHz specific issues p. 21
8.1 UE specific p. 21
8.1.1 Transmitter characteristics p. 22
8.1.1.1 UE maximum output power p. 22
8.1.1.2 UE maximum output power for modulation / channel bandwidth p. 22
8.1.1.3 UE maximum output power with additional requirements p. 22
8.1.1.4 Adjacent Channel Leakage Ratio (ACLR) p. 22
8.1.1.5 Spectrum emission mask p. 23
8.1.1.6 Spurious emissions p. 23
8.1.2 Receiver characteristics p. 24
8.2 BS specific p. 26
8.2.1 Operating band unwanted emissions p. 26
8.2.1.1 Minimum requirement for BS type 1-C and BS type 1-H p. 27
8.2.1.2 Minimum requirement for BS type 1-O p. 27
8.2.2 Additional spurious emissions requirements p. 27
8.2.2.1 Minimum requirement for BS type 1-C and BS type 1-H p. 27
8.2.2.2 Minimum requirement for BS type 1-O p. 27
8.2.3 Co-location with other base stations p. 27
8.2.3.1 Minimum requirement for BS type 1-C and BS type 1-H p. 27
8.2.3.2 Minimum requirement for BS type 1-O p. 27
8.2.4 General blocking requirement p. 28
8.2.4.1 Minimum requirement for BS type 1-C and BS type 1-H p. 28
8.2.4.2 Minimum requirement for BS type 1-O p. 28
8.2.5 Blocking requirement for co-location with other base stations p. 28
9 Required changes to NR, E-UTRA, UTRA and MSR specifications p. 28
$ Change History p. 29
