Content for TS 38.176-2 Word version: 18.5.0
7 Radiated receiver characteristics
7.1 General
7.2 OTA sensitivity
7.3 OTA reference sensitivity level
7.4 OTA dynamic range
7.5 OTA in-band selectivity and blocking
7.6 OTA out-of-band blocking
7.7 OTA receiver spurious emissions
7.8 OTA receiver intermodulation
7.9 OTA in-channel selectivity
8 Radiated performance requirements
8.1 IAB-DU performance requirements
8.2 IAB-MT performance requirements
7 Radiated receiver characteristics p. 146
7.1 General p. 146
7.2 OTA sensitivity p. 146
7.2.1 Definition and applicability p. 146
7.2.2 Minimum requirement p. 147
7.2.3 Test purpose p. 147
7.2.4 Method of test p. 147
7.2.4.1 Initial conditions p. 147
7.2.4.2 Procedure p. 148
7.2.5 Test requirements p. 148
7.3 OTA reference sensitivity level p. 149
7.3.1 Definition and applicability p. 149
7.3.2 Minimum requirement p. 149
7.3.3 Test Purpose p. 149
7.3.4 Method of test p. 149
7.3.4.1 Initial conditions p. 149
7.3.4.2 Procedure p. 150
7.3.5 Test requirements p. 150
7.4 OTA dynamic range p. 154
7.4.1 Definition and applicability p. 154
7.4.2 Minimum requirement p. 154
7.4.3 Test purpose p. 154
7.4.4 Method of test p. 154
7.4.4.1 Initial conditions p. 154
7.4.4.2 Procedure p. 155
7.4.5 Test requirement p. 155
7.4.5.1 General p. 155
7.4.5.2 Test requirements for IAB-DU type 1-O p. 155
7.5 OTA in-band selectivity and blocking p. 159
7.5.1 OTA adjacent channel selectivity p. 159
7.5.1.1 Definition and applicability p. 159
7.5.1.2 Minimum requirement p. 159
7.5.1.3 Test purpose p. 159
7.5.1.4 Method of test p. 159
7.5.1.4.1 Initial conditions p. 159
7.5.1.4.2 Procedure p. 159
7.5.1.5 Test requirement p. 160
7.5.2 OTA in-band blocking p. 164
7.5.2.1 Definition and applicability p. 164
7.5.2.2 Minimum requirement p. 164
7.5.2.3 Test purpose p. 164
7.5.2.4 Method of test p. 164
7.5.2.4.1 Initial conditions p. 164
7.5.2.4.2 Procedure p. 165
7.5.2.5 Test requirement p. 167
7.6 OTA out-of-band blocking p. 175
7.6.1 Definition and applicability p. 175
7.6.2 Minimum requirement p. 176
7.6.3 Test purpose p. 176
7.6.4 Method of test p. 176
7.6.4.1 Initial conditions p. 176
7.6.4.2 Procedure p. 176
7.6.5 Test requirements p. 178
7.6.5.1 Requirement for IAB Type 1-O p. 178
7.6.5.1.1 General p. 178
7.6.5.1.2 Co-location requirement p. 179
7.6.5.2 Requirement for IAB type 2-O p. 179
7.7 OTA receiver spurious emissions p. 180
7.7.1 Definition and applicability p. 180
7.7.2 Minimum requirement p. 180
7.7.3 Test purpose p. 181
7.7.4 Method of test p. 181
7.7.4.1 Initial conditions p. 181
7.7.4.2 Procedure p. 181
7.7.5 Test requirement p. 182
7.8 OTA receiver intermodulation p. 183
7.8.1 Definition and applicability p. 183
7.8.2 Minimum requirement p. 184
7.8.3 Test purpose p. 184
7.8.4 Method of test p. 184
7.8.4.1 Initial conditions p. 184
7.8.4.2 Procedure p. 184
7.8.5 Test requirement p. 185
7.9 OTA in-channel selectivity p. 194
7.9.1 Definition and applicability p. 194
7.9.2 Minimum requirement p. 195
7.9.3 Test purpose p. 195
7.9.4 Method of test p. 195
7.9.4.1 Initial conditions p. 195
7.9.4.2 Procedure p. 195
7.9.5 Test requirement p. 196
7.9.5.1 IAB-DU type 1-O p. 196
7.9.5.2 IAB-DU type 2-O p. 198
8 Radiated performance requirements p. 199
8.1 IAB-DU performance requirements p. 199
8.1.1 General p. 199
8.1.1.1 Scope and definitions p. 199
8.1.1.2 OTA demodulation branches p. 200
8.1.1.3 Applicability rule p. 200
8.1.2 Performance requirements for PUSCH p. 202
8.1.2.1 Performance requirements for PUSCH with transform precoding disabled p. 202
8.1.2.1.1 Definition and applicability p. 202
8.1.2.1.2 Minimum Requirement p. 202
8.1.2.1.3 Test purpose p. 202
8.1.2.1.4 Method of test p. 202
8.1.2.1.5 Test Requirement p. 204
8.1.2.2 Performance requirements for PUSCH with transform precoding enabled p. 210
8.1.2.2.1 Definition and applicability p. 210
8.1.2.2.2 Minimum Requirement p. 210
8.1.2.2.3 Test Purpose p. 210
8.1.2.2.4 Method of test p. 210
8.1.2.2.5 Test Requirement p. 212
8.1.2.3 Performance requirements for UCI multiplexed on PUSCH p. 213
8.1.2.3.1 Definition and applicability p. 213
8.1.2.3.2 Minimum Requirement p. 213
8.1.2.3.3 Test Purpose p. 214
8.1.2.3.4 Method of test p. 214
8.1.2.3.5 Test Requirement p. 216
8.1.3 Performance requirements for PUCCH p. 217
8.1.3.1 Performance requirements for PUCCH format 0 p. 217
8.1.3.1.1 Definition and applicability p. 217
8.1.3.1.2 Minimum Requirement p. 218
8.1.3.1.3 Test Purpose p. 218
8.1.3.1.4 Method of test p. 218
8.1.3.1.5 Test Requirement p. 220
8.1.3.2 Performance requirements for PUCCH format 1 p. 220
8.1.3.3 Performance requirements for PUCCH format 2 p. 226
8.1.3.3.1 ACK missed detection performance requirements p. 226
8.1.3.3.2 UCI BLER performance requirements p. 229
8.1.3.4 Performance requirements for PUCCH format 3 p. 231
8.1.3.4.1 Definition and applicability p. 231
8.1.3.4.2 Minimum Requirement p. 232
8.1.3.4.3 Test Purpose p. 232
8.1.3.4.4 Method of test p. 232
8.1.3.4.5 Test Requirement p. 233
8.1.3.5 Performance requirements for PUCCH format 4 p. 234
8.1.3.5.1 Definition and applicability p. 234
8.1.3.5.2 Minimum Requirement p. 235
8.1.3.5.3 Test Purpose p. 235
8.1.3.5.4 Method of test p. 235
8.1.3.5.5 Test Requirement p. 236
8.1.3.6 Performance requirements for multi-slot PUCCH p. 237
8.1.4 Performance requirements for PRACH p. 241
8.2 IAB-MT performance requirements p. 244
8.2.1 General p. 244
8.2.2 Demodulation performance requirements p. 245
8.2.2.1 General p. 245
8.2.2.2 Performance requirements for PDSCH p. 246
8.2.2.2.1 Definition and applicability p. 246
8.2.2.2.2 Minimum requirements p. 246
8.2.2.2.3 Test purpose p. 246
8.2.2.2.4 Method of test p. 246
8.2.2.2.5 Test requirements p. 248
8.2.2.3 Demodulation performance requirements for PDCCH p. 249
8.2.2.3.1 Definition and applicability p. 249
8.2.2.3.2 Minimum requirement p. 249
8.2.2.3.3 Test purpose p. 249
8.2.2.3.4 Method of test p. 249
8.2.2.3.5 Test requirements p. 250
8.2.3 CSI reporting requirements p. 251
8.2.3.1 General p. 251
8.2.3.2 Reporting of Channel Quality Indicator (CQI) p. 253
8.2.3.2.1 Definition and applicability p. 253
8.2.3.2.2 Minimum requirement p. 253
8.2.3.2.3 Test purpose p. 254
8.2.3.2.4 Method of test p. 254
8.2.3.2.5 Test requirement p. 257
8.2.3.3 Reporting of Precoding Matrix Information (PMI) p. 257
8.2.3.3.1 Definition and applicability p. 257
8.2.3.3.2 Minimum requirement p. 258
8.2.3.3.3 Test purpose p. 258
8.2.3.3.4 Method of test p. 258
8.2.3.3.5 Test requirement p. 261
8.2.3.4 Reporting of Rank Information (RI) p. 262
8.2.3.4.1 Definition and applicability p. 262
8.2.3.4.2 Minimum requirement p. 262
8.2.3.4.3 Test purpose p. 262
8.2.3.4.4 Method of test p. 262
8.2.3.4.5 Test requirement p. 264
