Content for TS 38.176-1 Word version: 18.5.0
7 Conducted receiver characteristics (IAB-DU and IAB-MT)
7.1 General
7.2 Reference sensitivity level
7.3 Dynamic range
7.4 In-band selectivity and blocking
7.5 Out-of-band blocking
7.6 Receiver spurious emissions
7.7 Receiver intermodulation
7.8 In-channel selectivity
8 Conducted performance requirements
8.1 IAB-DU performance requirements
8.2 IAB-MT Performance requirements
7 Conducted receiver characteristics (IAB-DU and IAB-MT) p. 102
7.1 General p. 102
7.2 Reference sensitivity level p. 102
7.2.1 Definition and applicability p. 102
7.2.2 Minimum requirement p. 102
7.2.3 Test purpose p. 103
7.2.4 Method of test p. 103
7.2.4.1 Initial conditions p. 103
7.2.4.2 Procedure p. 103
7.2.5 Test requirements p. 103
7.3 Dynamic range p. 106
7.3.1 Definition and applicability p. 106
7.3.2 Minimum requirement p. 106
7.3.3 Test purpose p. 106
7.3.4 Method of test p. 106
7.3.4.1 Initial conditions p. 106
7.3.4.2 Procedure p. 106
7.3.5 Test requirements p. 107
7.4 In-band selectivity and blocking p. 110
7.4.1 Adjacent Channel Selectivity (ACS) p. 110
7.4.1.1 Definition and applicability p. 110
7.4.1.2 Minimum requirement p. 111
7.4.1.3 Test purpose p. 111
7.4.1.4 Method of test p. 111
7.4.1.4.1 Initial conditions p. 111
7.4.1.4.2 Procedure p. 111
7.4.1.5 Test requirements p. 111
7.4.2 In-band blocking p. 114
7.4.2.1 Definition and applicability p. 114
7.4.2.2 Minimum requirement p. 114
7.4.2.3 Test purpose p. 114
7.4.2.4 Method of test p. 114
7.4.2.4.1 Initial conditions p. 114
7.4.2.4.2 Procedure for general blocking p. 114
7.4.2.4.3 Procedure for narrowband blocking p. 115
7.4.2.5 Test requirements p. 115
7.5 Out-of-band blocking p. 119
7.5.1 Definition and applicability p. 119
7.5.2 Minimum requirement p. 119
7.5.3 Test purpose p. 120
7.5.4 Method of test p. 120
7.5.4.1 Initial conditions p. 120
7.5.4.2 Procedure p. 120
7.5.5 Test requirements p. 121
7.6 Receiver spurious emissions p. 123
7.6.1 Definition and applicability p. 123
7.6.2 Minimum requirement p. 123
7.6.3 Test purpose p. 124
7.6.4 Method of test p. 124
7.6.4.1 Initial conditions p. 124
7.6.4.2 Procedure p. 124
7.6.5 Test requirements p. 124
7.7 Receiver intermodulation p. 126
7.7.1 Definition and applicability p. 126
7.7.2 Minimum requirement p. 126
7.7.3 Test purpose p. 127
7.7.4 Method of test p. 127
7.7.4.1 Initial conditions p. 127
7.7.4.2 Procedure p. 127
7.7.5 Test requirements p. 127
7.7.5.1 IAB-DU p. 127
7.7.5.2 IAB-MT p. 131
7.8 In-channel selectivity p. 133
7.8.1 Definition and applicability p. 133
7.8.2 Minimum requirement p. 134
7.8.3 Test purpose p. 134
7.8.4 Method of test p. 134
7.8.4.1 Initial conditions p. 134
7.8.4.2 Procedure p. 134
7.8.5 Test requirements p. 134
7.8.5.1 IAB-DU p. 134
8 Conducted performance requirements p. 136
8.1 IAB-DU performance requirements p. 136
8.1.1 General p. 136
8.1.1.1 Scope and definitions p. 136
8.1.1.2 Applicability rule p. 137
8.1.2 Performance requirements for PUSCH p. 139
8.1.2.1 Performance requirements for PUSCH with transform precoding disabled p. 139
8.1.2.1.1 Definition and applicability p. 139
8.1.2.1.2 Minimum requirement p. 139
8.1.2.1.3 Test purpose p. 139
8.1.2.1.4 Method of test p. 139
8.1.2.1.5 Test requirement p. 140
8.1.2.2 Performance requirements for PUSCH with transform precoding enabled p. 146
8.1.2.2.1 Definition and applicability p. 146
8.1.2.2.2 Minimum requirement p. 146
8.1.2.2.3 Test purpose p. 147
8.1.2.2.4 Method of test p. 147
8.1.2.2.5 Test requirement p. 148
8.1.2.3 Performance requirements for UCI multiplexed on PUSCH p. 149
8.1.2.3.1 Definition and applicability p. 149
8.1.2.3.2 Minimum requirement p. 149
8.1.2.3.3 Test purpose p. 149
8.1.2.3.4 Method of test p. 149
8.1.2.3.5 Test requirement p. 150
8.1.3 Performance requirements for PUCCH p. 151
8.1.3.1 Performance requirements for PUCCH format 0 p. 151
8.1.3.1.1 Definition and applicability p. 151
8.1.3.1.2 Minimum requirement p. 152
8.1.3.1.3 Test purpose p. 152
8.1.3.1.4 Method of test p. 152
8.1.3.1.5 Test requirement p. 153
8.1.3.2 Performance requirements for PUCCH format 1 p. 153
8.1.3.3 Performance requirements for PUCCH format 2 p. 158
8.1.3.4 Performance requirements for PUCCH format 3 p. 161
8.1.3.4.1 Definition and applicability p. 161
8.1.3.4.2 Minimum requirement p. 161
8.1.3.4.3 Test purpose p. 161
8.1.3.4.4 Method of test p. 162
8.1.3.4.5 Test requirement p. 163
8.1.3.5 Performance requirements for PUCCH format 4 p. 163
8.1.3.5.1 Definition and applicability p. 163
8.1.3.5.2 Minimum requirement p. 164
8.1.3.5.3 Test purpose p. 164
8.1.3.5.4 Method of test p. 164
8.1.3.5.5 Test requirement p. 165
8.1.3.6 Performance requirements for multi-slot PUCCH p. 166
8.1.4 Performance requirements for PRACH p. 169
8.2 IAB-MT Performance requirements p. 172
8.2.1 General p. 172
8.2.2 Demodulation performance requirements p. 173
8.2.2.1 General p. 173
8.2.2.2 Performance requirements for PDSCH p. 174
8.2.2.2.1 Definition and applicability p. 174
8.2.2.2.2 Minimum requirement p. 174
8.2.2.2.3 Test purpose p. 174
8.2.2.2.4 Method of test p. 174
8.2.2.2.5 Test requirement p. 176
8.2.2.3 Performance requirements for PDCCH p. 176
8.2.2.3.1 Definition and applicability p. 176
8.2.2.3.2 Minimum requirement p. 176
8.2.2.3.3 Test purpose p. 177
8.2.2.3.4 Method of test p. 177
8.2.2.3.5 Test requirement p. 177
8.2.3 CSI reporting requirements p. 178
8.2.3.1 General p. 178
8.2.3.1.1 Applicability rule for IAB-MT p. 178
8.2.3.1.1.1 General p. 178
8.2.3.1.1.2 Applicability of requirements for different subcarrier spacings p. 178
8.2.3.1.1.3 Applicability of requirements for TDD with different UL-DL patterns p. 178
8.2.3.1.1.4 Applicability of requirements for IAB-MT features p. 178
8.2.3.1.2 Common test parameters p. 178
8.2.3.2 Reporting Channel Quality Indicator (CQI) p. 179
8.2.3.2.1 Definition and applicability p. 179
8.2.3.2.2 Minimum requirement p. 180
8.2.3.2.3 Test purpose p. 180
8.2.3.2.4 Method of test p. 180
8.2.3.2.5 Test requirement p. 181
8.2.3.3 Reporting of Precoding Matrix Indicator (PMI) p. 181
8.2.3.3.1 Definition and applicability p. 181
8.2.3.3.2 Minimum requirement p. 182
8.2.3.3.3 Test purpose p. 182
8.2.3.3.4 Method of test p. 182
8.2.3.3.5 Test requirement p. 183
8.2.3.4 Reporting of Rank Indicator (RI) p. 184
8.2.3.4.1 General p. 184
8.2.3.4.2 Minimum requirements p. 184
8.2.3.4.3 Test purpose p. 184
8.2.3.4.4 Method of test p. 184
8.2.3.4.5 Test requirement p. 185
