Content for TS 38.174 Word version: 18.5.0
6 Conducted transmitter characteristics
6.1 General
6.2 IAB output power
6.3 Output power dynamics
6.4 Transmit ON/OFF power
6.5 Transmitted signal quality
6.6 Unwanted emissions
6.7 Transmitter intermodulation
...
...
6 Conducted transmitter characteristics p. 55
6.1 General p. 55
6.2 IAB output power p. 56
6.2.1 General p. 56
6.2.1B Output power for mIAB-MT p. 56
6.2.2 Minimum requirement for IAB type 1-H p. 56
6.2.3 Additional requirements (regional) p. 56
6.3 Output power dynamics p. 57
6.3.1 IAB-DU Output Power Dynamics p. 57
6.3.1.1 General p. 57
6.3.1.2 RE power control dynamic range p. 57
6.3.1.3 Total power dynamic range p. 57
6.3.2 IAB-MT Output Power Dynamics p. 57
6.3.3 Power control p. 58
6.4 Transmit ON/OFF power p. 59
6.4.1 Transmitter OFF power p. 59
6.4.1.1 General p. 59
6.4.1.3 Minimum requirement for IAB-DU type 1-H p. 59
6.4.1.4 Minimum requirement for IAB-MT type 1-H p. 59
6.4.2 Transmitter transient period p. 59
6.5 Transmitted signal quality p. 60
6.5.1 Frequency error p. 60
6.5.2 Modulation quality p. 60
6.5.3 Time alignment error p. 61
6.5.4 Timing error between IAB-DU and IAB-MT of the same IAB-Node p. 61
6.6 Unwanted emissions p. 61
6.6.1 General p. 61
6.6.2 Occupied bandwidth p. 62
6.6.2.1 General p. 62
6.6.2.2 Minimum requirement for IAB-DU type 1-H p. 62
6.6.2.3 Minimum requirement for IAB-MT type 1-H p. 62
6.6.3 Adjacent Channel Leakage Power Ratio p. 62
6.6.3.1 General p. 62
6.6.3.2 Limits and Basic limits p. 63
6.6.3.3 Minimum requirement for IAB-DU type 1-H and IAB-MT type 1-H p. 65
6.6.4 Operating band unwanted emissions p. 66
6.6.4.1 General p. 66
6.6.4.2 Basic limits p. 68
6.6.4.2.1 Basic limits for Wide Area IAB-DU and Wide Area IAB-MT (Category A) p. 68
6.6.4.2.2 Basic limits for Wide Area IAB-DU and Wide Area IAB-MT (Category B) p. 68
6.6.4.2.3 Basic limits for Medium Range IAB-DU (Category A and B) p. 69
6.6.4.2.4 Basic limits for Local Area IAB-DU and Local Area IAB-MT (Category A and B) p. 70
6.6.4.2.5 Basic limits for additional requirements p. 70
6.6.4.3 Minimum requirements for IAB-DU type 1-H and IAB-MT type 1-H p. 70
6.6.5 Transmitter spurious emissions p. 71
6.6.5.1 General p. 71
6.6.5.2 Basic limits p. 71
6.6.5.2.1 General transmitter spurious emissions requirements p. 71
6.6.5.2.2 Additional spurious emissions requirements p. 72
6.6.5.2.3 Co-location with base stations and IAB-Nodes p. 78
6.6.5.3 Minimum requirements for IAB-DU and IAB-MT type 1-H p. 83
6.7 Transmitter intermodulation p. 83
