Content for TS 38.115-2 Word version: 18.1.0
3 Definitions of terms, symbols and abbreviations
4 General radiated test conditions and declarations
5 Operating bands and channel arrangement
6 Radiated characteristics
3 Definitions of terms, symbols and abbreviations p. 18
4 General radiated test conditions and declarations p. 21
4.1 Measurement uncertainties and test requirements p. 21
4.1.1 General p. 21
4.1.2 Acceptable uncertainty of Test System p. 22
4.1.3 Interpretation of measurement results p. 23
4.2 Radiated requirement reference points p. 24
4.3 Repeater classes p. 24
4.4 Regional requirements p. 25
4.5 Repeater configurations p. 25
4.5.1 Downlink configurations p. 25
4.5.2 Uplink configurations p. 26
4.5.3 Power supply options p. 26
4.6 Manufacturer's declarations p. 26
4.7 Test configurations p. 30
4.7.1 General p. 30
4.7.2 Test signal configurations p. 30
4.8 Applicability of requirements p. 32
4.9 RF channels and test models p. 33
4.9.1 RF channels p. 33
4.9.2 Test models p. 33
4.9.2.1 General p. 33
4.9.2.2 FR2 test models for repeater type 2-O for DL p. 33
4.9.2.3 FR2 test models for repeater type 2-O for UL p. 34
4.9.2.3.1 FR2 test model 1.1 (RUL-FR2-TM1.1) p. 35
4.9.2.3.2 FR2 test model 2 (RUL-FR2-TM2) p. 35
4.9.2.3.2a FR2 test model 2a (RUL-FR2-TM2a) p. 36
4.9.2.3.3 FR2 test model 3.1 (RUL-FR2-TM3.1) p. 36
4.9.2.3.4 FR2 test model 3.1a (RUL-FR2-TM3.1a) p. 36
4.9.2.4 Data content of physical channels and signals for RUL-FR2-TM p. 37
4.9.2.4.1 PUSCH p. 37
4.10 Requirements for contiguous and non-contiguous spectrum p. 37
4.11 Format and interpretation of tests p. 38
4.12 Reference coordinate system p. 39
5 Operating bands and channel arrangement p. 40
6 Radiated characteristics p. 40
6.1 General p. 40
6.2 OTA output power p. 40
6.2.1 General p. 40
6.2.2 OTA output power (EIRP) p. 40
6.2.2.1 Definition and applicability p. 40
6.2.2.2 Minimum requirement p. 41
6.2.2.3 Test purpose p. 42
6.2.2.4 Method of test p. 42
6.2.2.4.1 Initial conditions p. 42
6.2.2.4.2 Procedure p. 42
6.2.2.5 Test requirement p. 43
6.2.3 OTA repeater output power (TRP) p. 43
6.2.3.1 Definition and applicability p. 43
6.2.3.2 Minimum requirement p. 44
6.2.3.3 Test purpose p. 44
6.2.3.4 Method of test p. 44
6.2.3.4.1 Initial conditions p. 44
6.2.3.4.2 Procedure p. 44
6.2.3.5 Test requirement p. 45
6.3 OTA frequency stability p. 45
6.3.1 Definition and applicability p. 45
6.3.2 Minimum Requirement p. 45
6.3.3 Test purpose p. 45
6.3.4 Method of test p. 45
6.3.5 Test Requirements p. 46
6.4 OTA out of band gain p. 46
6.4.1 Definition and applicability p. 46
6.4.2 Minimum Requirement p. 46
6.4.3 Test purpose p. 46
6.4.4 Method of test p. 46
6.4.4.1 Initial conditions p. 46
6.4.4.2 Procedure p. 46
6.4.5 Test Requirements p. 47
6.5 OTA unwanted emissions p. 47
6.5.1 General p. 47
6.5.2 OTA Adjacent Channel Leakage Power Ratio (ACLR) p. 48
6.5.2.1 Definition and applicability p. 48
6.5.2.2 Minimum requirement p. 48
6.5.2.3 Test purpose p. 48
6.5.2.4 Method of test p. 48
6.5.2.4.1 Initial conditions p. 48
6.5.2.4.2 Procedure p. 48
6.5.2.5 Test requirements p. 49
6.5.3 OTA operating band unwanted emissions p. 53
6.5.3.1 Definition and applicability p. 53
6.5.3.2 Minimum requirement p. 54
6.5.3.3 Test purpose p. 54
6.5.3.3a Method of test p. 54
6.5.3.3a.1 Initial conditions p. 54
6.5.3.3a.2 Procedure p. 54
6.5.3.4 Test requirements p. 55
6.5.4 OTA transmitter spurious emissions p. 57
6.5.4.1 Definition and applicability p. 57
6.5.4.2 Minimum requirement p. 57
6.5.4.3 Test purpose p. 57
6.5.4.4 Method of test p. 57
6.5.4.4.1 Initial conditions p. 57
6.5.4.4.2 Procedure p. 58
6.5.4.5 Test requirements p. 58
6.6 OTA Repeater Error Vector Magnitude p. 60
6.6.1 Downlink repeater error vector magnitude p. 60
6.6.1.1 General p. 60
6.6.1.2 Minimum requirements p. 60
6.6.1.3 Test purpose p. 60
6.6.1.4 Method of test p. 61
6.6.1.4.1 Initial conditions p. 61
6.6.1.4.2 Procedure p. 61
6.6.1.5 Test requirement p. 62
6.6.2 Uplink Repeater error vector magnitude p. 62
6.6.2.1 General p. 62
6.6.2.2 Minimum requirement p. 63
6.6.2.3 Test purpose p. 63
6.6.2.4 Method of test p. 63
6.6.2.4.1 Initial conditions p. 63
6.6.2.4.2 Procedure p. 64
6.6.2.5 Test requirement p. 64
6.7 OTA input intermodulation p. 65
6.7.1 Definition and applicability p. 65
6.7.1.1 General p. 65
6.7.1.2 Minimum requirements p. 65
6.7.1.3 Test purpose p. 65
6.7.1.4 Method of test p. 65
6.7.1.4.1 Initial conditions p. 65
6.7.1.4.2 Procedure p. 65
6.7.1.5 Test requirements p. 66
6.8 OTA Adjacent Channel Rejection Ratio (ACRR) p. 66
6.8.1 Definitions and applicability p. 66
6.8.2 Co-existence with NR p. 67
6.9 OTA transmit ON/OFF power p. 69
6.9.1 OTA transmitter OFF power p. 69
6.9.1.1 Definition and applicability p. 69
6.9.1.2 Minimum requirement p. 69
6.9.1.3 Test purpose p. 69
6.9.1.4 Method of test p. 69
6.9.1.5 Test requirements p. 69
6.9.2 OTA transient period p. 70
6.9.2.1 Definition and applicability p. 70
6.9.2.2 Minimum requirement p. 70
6.9.2.3 Test purpose p. 70
6.9.2.4 Method of test p. 70
6.9.2.4.1 Initial conditions p. 70
6.9.2.4.2 Procedure p. 71
6.9.2.5 Test requirements p. 71
