Content for TS 38.101-5 Word version: 18.6.0
4 General
5 Operating bands and channel arrangement
6 Conducted transmitter characteristics
7 Conducted receiver characteristics
8 Conducted performance requirements
9 Radiated transmitter characteristics
10 Radiated receiver characteristics
11 Demodulation performance requirements (Radiated requirements)
4 General p. 15
4.1 Relationship between minimum requirements and test requirements p. 15
4.2 Applicability of minimum requirements p. 15
4.3 Specification suffix information p. 15
4.4 Relationship with other core specifications p. 15
5 Operating bands and channel arrangement p. 16
5.1 General p. 16
5.2 Operating bands p. 16
5.2.1 General p. 16
5.2.2 Operating bands with conducted requirements p. 16
5.2.3 Operating bands with radiated requirements p. 16
5.3 UE channel bandwidth p. 17
5.3.1 General p. 17
5.3.2 Maximum transmission bandwidth configuration p. 17
5.3.3 Minimum guardband and transmission bandwidth configuration p. 18
5.3.4 RB alignment p. 19
5.3.5 UE channel bandwidth per operating band p. 19
5.3.6 Asymmetric channel bandwidths p. 20
5.4 Channel arrangement p. 21
5.4.1 Channel spacing p. 21
5.4.2 Channel raster p. 21
5.4.2.1 NR-ARFCN and channel raster p. 21
5.4.2.2 Channel raster to resource element mapping p. 21
5.4.2.3 Channel raster entries for each operating band p. 22
5.4.3 Synchronization raster p. 23
5.4.3.1 Synchronization raster and numbering p. 23
5.4.3.2 Synchronization raster to synchronization block resource element mapping p. 23
5.4.3.3 Synchronization raster entries for each operating band p. 23
5.4.4 TX-RX frequency separation p. 24
6 Conducted transmitter characteristics p. 24
6.1 General p. 24
6.2 Transmitter power p. 24
6.2.1 UE maximum output power p. 24
6.2.2 UE maximum output power reduction p. 25
6.2.3 UE additional maximum output power reduction p. 25
6.2.3.1 General p. 25
6.2.3.2 A-MPR for NS_03N p. 26
6.2.3.3 A-MPR for NS_04N p. 26
6.2.3.4 A-MPR for NS_05N p. 27
6.2.4 Configured transmitted power p. 27
6.3 Output power dynamics. p. 27
6.3.1 Minimum output power p. 27
6.3.2 Transmit OFF power p. 28
6.3.3 Transmit ON/OFF time mask p. 28
6.3.4 Power control p. 28
6.4 Transmit signal quality p. 28
6.5 Output RF spectrum emissions p. 29
6.5.1 Occupied bandwidth p. 29
6.5.2 Out of band emission p. 29
6.5.2.1 General p. 29
6.5.2.2 Spectrum emission mask p. 30
6.5.2.3 Additional spectrum emission mask p. 30
6.5.2.3.1 Requirements for network signalling value "NS_04N" p. 30
6.5.2.3.2 Requirements for network signalling value "NS_05N" p. 30
6.5.2.4 Adjacent channel leakage ratio p. 31
6.5.2.4.1 NR ACLR p. 31
6.5.2.4.2 UTRA ACLR p. 31
6.5.3 Spurious emission p. 32
6.5.3.1 General spurious emissions p. 32
6.5.3.2 Spurious emissions for UE co-existence p. 32
6.5.3.3 Additional spurious emissions p. 33
6.5.4 Transmit intermodulation p. 35
7 Conducted receiver characteristics p. 35
7.1 General p. 35
7.2 Diversity characteristics p. 36
7.3 Reference sensitivity p. 36
7.3.1 General p. 36
7.3.2 Reference sensitivity power level p. 36
7.4 Maximum input level p. 37
7.5 Adjacent channel selectivity p. 37
7.6 Blocking characteristics p. 38
7.6.1 General p. 38
7.6.2 In-band blocking p. 39
7.6.3 Out-of-band blocking p. 39
7.6.4 Narrow band blocking p. 40
7.7 Spurious response p. 41
7.8 Intermodulation characteristics p. 41
7.9 Spurious emissions p. 42
8 Conducted performance requirements p. 42
8.1 General p. 42
8.1.1 Relationship between minimum requirements and test requirements p. 42
8.1.2 Applicability of minimum requirements p. 42
8.1.3 Conducted requirements p. 42
8.1.3.1 Introduction p. 42
8.1.3.2 Reference point p. 43
8.1.3.3 SNR definition p. 43
8.1.3.4 Noc p. 43
8.2 Demodulation performance requirements p. 44
8.2.1 General p. 44
8.3 CSI reporting requirements p. 49
9 Radiated transmitter characteristics p. 49
9.1 General p. 49
9.2 Transmitter power p. 49
9.2.1 NTN VSAT maximum output power p. 49
9.2.1.0 General p. 49
9.2.1.1 Minimum requirements for Fixed VSAT p. 49
9.2.1.2 Minimum requirements for Mobile VSAT p. 50
9.2.2 Off-axis EIRP emission density limit within the operating band p. 51
9.2.2.1 General p. 51
9.2.2.2 Minimum requirement for bands n510 and n511 p. 51
9.2.2.3 Minimum requirement for band n512 p. 52
9.2.3 Configured transmitted power p. 54
9.3 Output power dynamics p. 54
9.3.1 Minimum output power p. 54
9.3.2 Transmit OFF power p. 54
9.3.2.1 General p. 54
9.3.3 Transmit ON/OFF time mask p. 55
9.3.3.1 General p. 55
9.3.3.2 General ON/OFF time mask p. 55
9.3.3.3 Transmit power time mask for slot and short or long subslot boundaries p. 55
9.3.3.4 PRACH time mask p. 56
9.3.3.5 Void
9.3.3.6 SRS time mask p. 56
9.3.3.7 PUSCH-PUCCH and PUSCH-SRS time masks p. 58
9.3.3.8 Transmit power time mask for consecutive slot or long subslot transmission and short subslot transmission boundaries p. 58
9.3.3.9 Transmit power time mask for consecutive short subslot transmissions boundaries p. 58
9.3.4 Power control p. 59
9.3.4.1 General p. 59
9.4 Transmitter signal quality p. 59
9.4.1 Frequency Error p. 59
9.4.2 Transmit modulation quality p. 60
9.4.2.1 General p. 60
9.4.2.2 Error vector magnitude p. 60
9.5 Output RF spectrum emissions p. 61
9.5.1 Occupied bandwidth p. 61
9.5.2 Out of Band Emissions p. 61
9.5.2.1 General p. 61
9.5.2.2 Spectrum emission mask p. 61
9.5.2.3 Adjacent channel leakage ratio p. 62
9.5.3 Spurious Emissions p. 63
9.6 Antenna pointing accuracy and performance p. 66
9.6.1 Antenna pointing accuracy p. 66
9.6.1.1 Minimum requirements for NTN VSAT p. 66
9.6.1.1.1 Applicability p. 66
9.6.1.1.2 Pointing Accuracy p. 66
9.6.1.1.3 On-axis cross polarization isolation p. 66
9.6.1.2 Minimum requirement for Fixed VSAT types 1 or 2 p. 66
9.6.2 Antenna performance p. 67
9.7 Additional regional requirements indicated by NS p. 68
9.7.1 General p. 68
10 Radiated receiver characteristics p. 69
10.1 General p. 69
10.2 Polarization characteristics p. 69
10.3 OTA reference sensitivity level p. 69
10.3.1 General p. 69
10.3.2 Minimum requirement p. 69
10.4 Maximum input level p. 70
10.4.1 General p. 70
10.4.2 Minimum requirement for Mobile VSAT p. 70
10.4.3 Minimum requirement for Fixed VSAT p. 70
10.5 Adjacent channel selectivity p. 71
10.6 Blocking characteristics p. 73
10.6.1 General p. 73
10.6.2 Minimum requirement for Mobile VSAT p. 73
10.6.3 Minimum requirement for Fixed VSAT p. 74
10.7 Spurious emissions p. 75
10.8 Receiver antenna off-axis performance p. 75
11 Demodulation performance requirements (Radiated requirements) p. 76
11.1 General p. 76
11.1.2 Applicability of minimum requirements p. 76
11.1.3 Conducted requirements p. 76
11.1.3.1 Introduction p. 76
11.1.3.2 Reference point p. 76
11.1.3.3 SNR definition p. 76
11.1.3.4 Noc p. 77
11.2 Demodulation performance requirements p. 77
