Content for TS 38.101-2 Word version: 18.6.0
A Measurement channels
A.1 General
A.2 UL reference measurement channels
A.3 DL reference measurement channels
A.5 OFDMA Channel Noise Generator (OCNG)
C Downlink physical channels
C.1 General
C.2 Setup
C.3 Connection
D Characteristics of the interfering signal
D.1 General
D.2 Interference signals
E Environmental conditions
E.1 General
E.2 Environmental
F Transmit modulation
F.1 Measurement Point
F.2 Basic Error Vector Magnitude measurement
F.3 Basic in-band emissions measurement
F.4 Modified signal under test
F.5 Window length
F.6 Averaged EVM
F.7 Spectrum Flatness
F.8 Phase offset measurement for DMRS bundling
F.9 Reserved
F.10 EVM for dual transmit polarizations
G Difference of relative phase and power errors
G.0 General
G.1 Measurement Point
G.2 Relative Phase Error Measurement
H Modified MPR behavior
H.1 Indication of modified MPR behavior
J UE coordinate system
J.1 Reference coordinate system
J.2 Test conditions and angle definitions
J.3 DUT positioning guidelines
L Requirement metric for simultaneous reception from multiple directions
L.1 Spherical coverage grid for simultaneous reception or transmission in multiple directions
L.2 Probability to support 2AoA reception
$ Change history
A (Normative) Measurement channels p. 190
A.1 General p. 190
A.2 UL reference measurement channels p. 190
A.2.1 General p. 190
A.2.2 Void
A.2.3 Reference measurement channels for TDD p. 191
A.2.3.1 DFT-s-OFDM Pi/2-BPSK p. 192
A.2.3.2 DFT-s-OFDM QPSK p. 192
A.2.3.3 DFT-s-OFDM 16QAM p. 193
A.2.3.4 DFT-s-OFDM 64QAM p. 193
A.2.3.5 CP-OFDM QPSK p. 194
A.2.3.6 CP-OFDM 16QAM p. 194
A.2.3.7 CP-OFDM 64QAM p. 195
A.2.3.8 DFT-s-OFDM 256QAM p. 195
A.2.3.9 CP-OFDM 256QAM p. 196
A.3 DL reference measurement channels p. 197
A.3.1 General p. 197
A.3.2 Void
A.3.3 DL reference measurement channels for TDD p. 200
A.3.3.1 General p. 200
A.3.3.2 FRC for receiver requirements for QPSK p. 201
– Reference measurement channels for SCS 60 kHz FR2 p. 201
– Reference measurement channels for SCS 120 kHz FR2 p. 202
– Reference measurement channels for SCS 480 kHz FR2 p. 203
– Reference measurement channels for SCS 960 kHz FR2 p. 204
– Reference measurement channels for SCS 60 kHz FR2 p. 205
– Reference measurement channels for SCS 120 kHz FR2 p. 206
A.3.3.3 FRC for receiver requirements for 16QAM p. 206
A.3.3.4 FRC for receiver requirements for 64QAM p. 207
A.3.3.5 FRC for receiver requirements for 256QAM p. 211
A.4 Void
A.5 OFDMA Channel Noise Generator (OCNG) p. 215
B Void
C (Normative) Downlink physical channels p. 217
D (Normative) Characteristics of the interfering signal p. 218
D.1 General p. 218
D.2 Interference signals p. 218
E (Normative) Environmental conditions p. 219
E.1 General p. 219
E.2 Environmental p. 219
F (Normative) Transmit modulation p. 221
F.1 Measurement Point p. 221
F.2 Basic Error Vector Magnitude measurement p. 221
F.3 Basic in-band emissions measurement p. 222
F.4 Modified signal under test p. 222
F.5 Window length p. 224
F.5.1 Timing offset p. 224
F.5.2 Window length p. 224
F.5.3 Window length for normal CP p. 225
F.5.4 Window length for Extended CP p. 225
F.5.5 Window length for PRACH p. 225
F.6 Averaged EVM p. 226
F.7 Spectrum Flatness p. 227
F.8 Phase offset measurement for DMRS bundling p. 227
F.8.1 Measurement point p. 227
F.8.2 Symbols used p. 228
F.8.3 Modified test signal p. 228
F.8.4 Phase offset measurement p. 228
F.9 Reserved p. 228
F.10 EVM for dual transmit polarizations p. 228
G (Normative) Difference of relative phase and power errors p. 231
H (Normative) Modified MPR behavior p. 233
I Void
J (Normative) UE coordinate system p. 234
J.1 Reference coordinate system p. 234
J.2 Test conditions and angle definitions p. 235
J.3 DUT positioning guidelines p. 244
K Void
L (Normative) Requirement metric for simultaneous reception from multiple directions p. 246
L.1 Spherical coverage grid for simultaneous reception or transmission in multiple directions p. 246
L.2 Probability to support 2AoA reception p. 246
$ Change history p. 247
