Content for TS 38.101-1 Word version: 18.6.0
6.3 Output power dynamics
6.3A Output power dynamics for CA
6.3B Output power dynamics for NR-DC
6.3C Output power dynamics for SUL
6.3D Output power dynamics for UL MIMO
6.3E Output power dynamics for V2X
6.3F Output power dynamics for shared spectrum channel access
6.3G Output power dynamics for Tx Diversity
6.3H Output power dynamics for CA with UL MIMO
6.3I (Reserved)
6.3J Output power dynamics for ATG
6.3K (Reserved)
6.3L Output power dynamics for CA with Tx Diversity
6.4 Transmit signal quality
6.4A Transmit signal quality for CA
6.4B Transmit signal quality for NR-DC
6.4C Transmit signal quality for SUL
6.4D Transmit signal quality for UL MIMO
6.4E Transmit signal quality for V2X
6.4F Transmit signal quality for shared spectrum channel access
6.4G Transmit signal quality for Tx Diversity
6.4H Transmit signal quality for CA with UL MIMO
6.4I (Reserved)
6.4J Transmit signal quality for ATG
6.4K (Reserved)
6.4L Transmit signal quality for CA with Tx Diversity
...
...
6.3 Output power dynamics p. 623
6.3.1 Minimum output power p. 623
6.3.2 Transmit OFF power p. 623
6.3.3 Transmit ON/OFF time mask p. 624
6.3.3.1 General p. 624
6.3.3.2 General ON/OFF time mask p. 624
6.3.3.3 Transmit power time mask for slot and short or long subslot boundaries p. 625
6.3.3.4 PRACH time mask p. 625
6.3.3.5 Void
6.3.3.6 SRS time mask p. 627
6.3.3.7 PUSCH-PUCCH and PUSCH-SRS time masks p. 628
6.3.3.8 Transmit power time mask for consecutive slot or long subslot transmission and short subslot transmission boundaries p. 629
6.3.3.9 Transmit power time mask for consecutive short subslot transmissions boundaries p. 630
6.3.4 Power control p. 631
6.3.4.1 General p. 631
6.3.4.2 Absolute power tolerance p. 631
6.3.4.3 Relative power tolerance p. 631
6.3.4.4 Aggregate power tolerance p. 632
6.3A Output power dynamics for CA p. 632
6.3A.1 Minimum output power for CA p. 632
6.3A.1.1 Minimum output power for intra-band contiguous CA p. 632
6.3A.1.2 Minimum output power for intra-band non-contiguous CA p. 632
6.3A.1.3 Minimum output power for inter-band CA p. 632
6.3A.1.4 Void
6.3A.2 Transmit OFF power for CA p. 633
6.3A.2.1 Transmit OFF power for intra-band contiguous CA p. 633
6.3A.2.2 Transmit OFF power for intra-band non-contiguous CA p. 633
6.3A.2.3 Transmit OFF power for inter-band CA p. 633
6.3A.2.4 Void
6.3A.3 Transmit ON/OFF time mask for CA p. 633
6.3A.3.1 Transmit ON/OFF time mask for intra-band contiguous CA p. 633
6.3A.3.2 Transmit ON/OFF time mask for intra-band non-contiguous CA p. 634
6.3A.3.3 Transmit ON/OFF time mask for inter-band CA p. 634
6.3A.3.3.1 General p. 634
6.3A.3.3.2 Time mask for switching between two uplink carriers p. 634
6.3A.3.3.3 Time mask for switching between two uplink carriers with two transmit antenna connectors p. 636
6.3A.3.3.4 Time mask for switching between one uplink band with one transmit antenna connector and one uplink band with two transmit antenna connectors p. 637
6.3A.3.3.5 Time mask for switching between two uplink bands with two transmit antenna connectors p. 638
6.3A.3.3.6 Time mask for switching across up to four uplink bands p. 639
6.3A.3.3.6a Additional requirements for three-band switching with dual TAG p. 643
6.3A.3.4 Void
6.3A.4 Power control for CA p. 644
6.3A.4.1 Power control for intra-band contiguous CA p. 644
6.3A.4.1.1 Absolute power tolerance p. 644
6.3A.4.1.2 Relative power tolerance p. 644
6.3A.4.1.3 Aggregate power control tolerance p. 644
6.3A.4.2 Power control for intra-band non-contiguous CA p. 644
6.3A.4.2.1 Absolute power tolerance p. 644
6.3A.4.2.2 Relative power tolerance p. 645
6.3A.4.2.3 Aggregate power control tolerance p. 645
6.3A.4.3 Power control for inter-band CA p. 645
6.3A.4.4 Void
6.3B Output power dynamics for NR-DC p. 645
6.3C Output power dynamics for SUL p. 645
6.3C.1 Void
6.3C.2 Void
6.3C.3 Transmit ON/OFF time mask for SUL p. 645
6.3C.3.0 General p. 645
6.3C.3.1 Time mask for switching between two uplink carriers p. 646
6.3C.3.2 Time mask for switching between two uplink carriers with two transmit antenna connectors p. 647
6.3C.3.3 Time mask for switching between one uplink band with one transmit antenna connector and one uplink band with two transmit antenna connectors p. 648
6.3C.3.4 Time mask for switching between two uplink bands with two transmit antenna connectors p. 649
6.3C.3.5 Time mask for switching across up to four uplink bands p. 650
6.3C.3.5a Additional requirements for three-band switching with dual TAG p. 654
6.3D Output power dynamics for UL MIMO p. 655
6.3D.1 Minimum output power for UL MIMO p. 655
6.3D.2 Transmit OFF power for UL MIMO p. 655
6.3D.3 Transmit ON/OFF time mask for UL MIMO p. 655
6.3D.4 Power control for UL MIMO p. 655
6.3E Output power dynamics for V2X p. 656
6.3E.1 Minimum output power for V2X p. 656
6.3E.1.1 General p. 656
6.3E.1.1A Minimum output power for sidelink CA p. 656
6.3E.1.2 Minimum output power for V2X con-current operation p. 656
6.3E.1F Minimum output power for Sidelink Unlicensed p. 656
6.3E.2 Transmit OFF power for V2X p. 657
6.3E.2.1 General p. 657
6.3E.2.1A Transmit OFF power for sidelink CA p. 657
6.3E.2.2 Transmit OFF power for V2X con-current operation p. 657
6.3E.2F Transmit OFF power for Sidelink Unlicensed p. 657
6.3E.3 Transmit ON/OFF time mask for V2X p. 658
6.3E.3.1 General p. 658
6.3E.3.1A Transmit ON/OFF time mask for sidelink CA p. 658
6.3E.3.2 General time mask p. 658
6.3E.3.3 S-SSB time mask p. 658
6.3E.3.4 Transmit ON/OFF time mask for V2X con-current operation p. 659
6.3E.3F Transmit ON/OFF time mask for Sidelink Unlicensed p. 660
6.3E.3F.1 General p. 660
6.3E.3F.2 General ON/OFF time mask p. 660
6.3E.3F.3 S-SSB time mask p. 661
6.3E.3F.4 Transmit ON/OFF time mask for NR SL-U con-current operation p. 661
6.3E.4 Power control for V2X p. 661
6.3E.4.1 General p. 661
6.3E.4.1A Power control for sidelink CA p. 661
6.3E.4.2 Absolute power tolerance p. 661
6.3E.4.3 Power control for V2X con-current operation p. 662
6.3E.4F Power control for Sidelink Unlicensed p. 662
6.3F Output power dynamics for shared spectrum channel access p. 662
6.3F.1 Minimum output power p. 662
6.3F.2 Transmit OFF power p. 662
6.3F.3 Transmit ON/OFF time mask p. 662
6.3F.3.1 General p. 662
6.3F.3.2 General ON/OFF time mask p. 662
6.3F.3A General ON/OFF mask for CA p. 663
6.3F.4 Power control p. 663
6.3F.4.1 General p. 663
6.3F.4.2 Absolute power tolerance p. 663
6.3F.4.3 Relative power tolerance p. 663
6.3F.4.4 Aggregate power tolerance p. 663
6.3F.4A Power control for inter-band CA p. 663
6.3G Output power dynamics for Tx Diversity p. 664
6.3G.1 Minimum output power for Tx Diversity p. 664
6.3G.2 Transmit OFF power for Tx Diversity p. 664
6.3G.3 Transmit ON/OFF time mask for Tx Diversity p. 664
6.3G.4 Power control for Tx Diversity p. 664
6.3H Output power dynamics for CA with UL MIMO p. 664
6.3H.1 Output power dynamics for intra-band UL contiguous CA with UL MIMO p. 664
6.3H.1.1 Minimum output power for intra-band UL contiguous CA with UL MIMO p. 664
6.3H.1.2 Transmit OFF power for intra-band UL contiguous CA with UL MIMO p. 664
6.3H.1.3 Transmit ON/OFF time mask for intra-band UL contiguous CA with UL MIMO p. 664
6.3H.1.4 Power control for intra-band UL contiguous CA with UL MIMO p. 665
6.3H.3 Output power dynamics for inter-band UL CA with UL MIMO p. 665
6.3I (Reserved) p. 665
6.3J Output power dynamics for ATG p. 665
6.3J.1 Minimum output power for ATG p. 665
6.3J.2 Transmit OFF power for ATG p. 666
6.3J.3 Transmit ON/OFF time mask for ATG p. 666
6.3J.4 Power control for ATG p. 666
6.3K (Reserved) p. 667
6.3L Output power dynamics for CA with Tx Diversity p. 667
6.4 Transmit signal quality p. 667
6.4.1 Frequency error p. 667
6.4.2 Transmit modulation quality p. 667
6.4.2.0 General p. 667
6.4.2.1 Error Vector Magnitude p. 668
6.4.2.1a Error Vector Magnitude including symbols with transient period p. 668
6.4.2.2 Carrier leakage p. 669
6.4.2.3 In-band emissions p. 670
6.4.2.4 EVM equalizer spectrum flatness p. 670
6.4.2.4.1 Requirements for Pi/2 BPSK modulation with powerBoosting-pi2BPSK capability p. 672
6.4.2.4.2 Requirements for Pi/2 BPSK and QPSK modulation with [powerBoostTSRel18] capability p. 672
6.4.2.5 Phase continuity requirements for DMRS bundling p. 673
6.4A Transmit signal quality for CA p. 674
6.4A.1 Frequency error for CA p. 674
6.4A.1.1 Frequency error for intra-band contiguous CA p. 674
6.4A.1.2 Frequency error for intra-band non-contiguous CA p. 674
6.4A.1.3 Frequency error for inter-band CA p. 674
6.4A.1.4 Void
6.4A.2 Transmit modulation quality for CA p. 675
6.4A.2.1 Transmit modulation quality for intra-band contiguous CA p. 675
6.4A.2.1.0 General p. 675
6.4A.2.1.1 Error Vector Magnitude p. 675
6.4A.2.1.2 In-band emissions p. 675
6.4A.2.1.3 Carrier leakage p. 679
6.4A.2.2 Transmit modulation quality for intra-band non-contiguous CA p. 679
6.4A.2.2.0 General p. 679
6.4A.2.2.1 Error Vector Magnitude p. 679
6.4A.2.2.2 In-band emissions p. 680
6.4A.2.2.3 Carrier leakage p. 680
6.4A.2.3 Transmit modulation quality for inter-band CA p. 680
6.4A.2.4 Void
6.4B Transmit signal quality for NR-DC p. 681
6.4C Transmit signal quality for SUL p. 681
6.4D Transmit signal quality for UL MIMO p. 681
6.4D.0 General p. 681
6.4D.1 Frequency error for UL MIMO p. 682
6.4D.2 Transmit modulation quality for UL MIMO p. 682
6.4D.2.0 General p. 682
6.4D.2.1 Error Vector Magnitude p. 682
6.4D.2.2 Carrier leakage p. 682
6.4D.2.3 In-band emissions p. 682
6.4D.2.4 EVM equalizer spectrum flatness for UL MIMO p. 682
6.4D.3 Time alignment error for UL MIMO p. 683
6.4D.4 Requirements for coherent UL MIMO p. 683
6.4E Transmit signal quality for V2X p. 683
6.4E.1 Frequency error for V2X p. 683
6.4E.1.1 General p. 683
6.4E.1.1A Frequency error for sidelink CA p. 684
6.4E.1.2 Frequency error for V2X con-current operation p. 684
6.4E.1F Frequency error for Sidelink Unlicensed p. 684
6.4E.2 Transmit modulation quality for V2X p. 684
6.4E.2.1 General p. 684
6.4E.2.2 Error Vector Magnitude for V2X p. 684
6.4E.2.2A Error Vector Magnitude for sidelink CA p. 684
6.4E.2.3 Carrier leakage for V2X p. 685
6.4E.2.3A Carrier leakage for sidelink CA p. 685
6.4E.2.4 In-band emissions for V2X p. 685
6.4E.2.4A In-band emissions for sidelink CA p. 685
6.4E.2.5 EVM equalizer spectrum flatness for V2X p. 685
6.4E.2.6 Transmit modulation quality for V2X con-current operation p. 685
6.4E.2F Transmit modulation quality for Sidelink Unlicensed p. 685
6.4F Transmit signal quality for shared spectrum channel access p. 686
6.4F.1 Frequency error p. 686
6.4F.2 Transmit modulation quality p. 686
6.4F.2.0 General p. 686
6.4F.2.1 Error Vector Magnitude p. 686
6.4F.2.2 Carrier leakage p. 686
6.4F.2.3 In-band emissions p. 687
6.4F.2.4 EVM equalizer spectrum flatness p. 687
6.4F.2A Transmit modulation quality for CA p. 688
6.4G Transmit signal quality for Tx Diversity p. 688
6.4G.1 Frequency error for Tx Diversity p. 688
6.4G.2 Transmit modulation quality for Tx Diversity p. 688
6.4G.2.0 General p. 688
6.4H Transmit signal quality for CA with UL MIMO p. 689
6.4H.1 Transmit signal quality for intra-band UL contiguous CA with UL MIMO p. 689
6.4H.1.1 Frequency error for intra-band UL contiguous CA with UL MIMO p. 689
6.4H.1.2 Transmit modulation quality for intra-band UL contiguous CA with UL MIMO p. 689
6.4H.1.2.0 General p. 689
6.4H.1.2.1 Error Vector Magnitude p. 690
6.4H.1.2.2 Carrier leakage p. 690
6.4H.1.2.3 In-band emissions p. 690
6.4H.1.3 Time alignment error for intra-band UL contiguous CA with UL MIMO p. 690
6.4H.1.4 Coherent UL MIMO requirement for intra-band UL contiguous CA with UL MIMO p. 690
6.4H.2 Void
6.4H.3 Transmit signal quality for inter-band UL CA with UL MIMO p. 690
6.4I (Reserved) p. 690
6.4J Transmit signal quality for ATG p. 690
6.4K (Reserved) p. 691
6.4L Transmit signal quality for CA with Tx Diversity p. 691
