Tech-invite  3GPPspace  IETFspace
21  22  23  24  25  26  27  28  29  31  32  33  34  35  36  37  38  4‑5x
Top   in Index   Prev   Next

TS 38.533
5G New Radio —
UE Conformance specification for
Radio Resource Management (RRM)

3GPP‑Page   ETSI‑search  
V18.5.0 (PDF)  2024/12  … p.
V17.9.0  2023/12  88 p.
V16.10.0  2021/12  50 p.
V15.2.0  2021/06  15 p.
Rapporteur:
Mr. Coroescu, Liviu
ROHDE & SCHWARZ

full Table of Contents for  TS 38.533  Word version:  18.3.0

Here   Top
1 Scope  2 References  3 Definitions, symbols and abbreviations  3A Requirements for the support of RRM  4 EN-DC with all NR cells in FR1  4A NE-DC with all NR cells in FR1  5 EN-DC with at least one NR cell in FR2  6 NR standalone in FR1  7 NR standalone with at least one NR cell in FR2  8 E-UTRA - NR inter-RAT with E-UTRA serving cell  9 NR sidelink  10 EN-DC Tests with NR PSCell under CCA and Other NR Cells in FR1  11 NR Standalone Tests with NR PCell under CCA and Other NR Cells in FR1  12 FFS  13 FFS  14 NR standalone tests for Satellite access  15 FFS  16 NR standalone tests with all NR cells in FR1 for RedCap  17 NR standalone tests with at least one NR cell in FR2 for RedCap  18 E-UTRA - NR inter-RAT with E-UTRA serving cell for RedCap  A RRM test configurations  B Conditions for RRM requirements applicability for operating bands  C Downlink physical channels and propagation conditions  D Deviations from standard test configuration  E Cell configuration mapping  F Measurement uncertainties and test tolerances  G Statistical testing  H Default message contents for RRM  I RRM OTA procedures  $ Change history 

 

1  Scope  p. 57

The present document specifies the measurement procedures for the conformance test of the user equipment (UE) that contain requirements for support of RRM (Radio Resource Management) as part of the 5G New Radio (5G-NR). This document covers NR Range 1, NR Range 2 and Interworking.
The requirements are listed in different clauses only if the corresponding parameters deviate. More generally, tests are only applicable to those mobiles that are intended to support the appropriate functionality. To indicate the circumstances in which tests apply, this is noted in the "test applicability" part of the test.
For example, only Release 15 and later UE declared to support NR shall be tested for this functionality. In the event that for some tests different conditions apply for different releases, this is indicated within the text of the test itself.
Up

2  References  p. 57

3  Definitions, symbols and abbreviations  p. 58

3A  Requirements for the support of RRM  p. 62

3A.1  General  p. 62

3A.2  Requirements Classification for Statistical Testing  p. 63

3A.3  Antenna Configuration  p. 64

3A.4  NR band groups  p. 64

3A.5  NR operating band configuration  p. 67

3A.6  UE with Multiband Capability  p. 68

4  EN-DC with all NR cells in FR1  p. 68

4.0  General  p. 68

4.1  Void

4.2  Void

4.3  RRC_CONNECTED state mobility  p. 69

4.4  Timing  p. 93

4.5  Signaling characteristics  p. 106

4.6  Measurement procedures  p. 402

4.7  Measurement performance requirements  p. 537

4A  NE-DC with all NR cells in FR1  p. 701

4A.0  General  p. 701

4A.1  Signalling characteristics  p. 701

4A.2  Measurement performance requirements  p. 712

5  EN-DC with at least one NR cell in FR2  p. 720

5.0  General  p. 720

5.1  Void

5.2  Void

5.3  RRC_CONNECTED state mobility  p. 720

5.4  Timing  p. 744

5.5  Signaling characteristics  p. 757

5.6  Measurement procedures  p. 1056

5.7  Measurement performance requirements  p. 1195

6  NR standalone in FR1  p. 1332

6.0  General  p. 1332

6.1  RRC_IDLE state mobility  p. 1332

6.2  RRC_INACTIVE state mobility  p. 1417

6.3  RRC_CONNECTED state mobility  p. 1424

6.4  Timing  p. 1569

6.5  Signaling characteristics  p. 1581

6.6  Measurement procedures  p. 1923

6.7  Measurement performance requirements  p. 2235

7  NR standalone with at least one NR cell in FR2  p. 2381

7.0  General  p. 2381

7.1  RRC_IDLE state mobility  p. 2381

7.2  RRC_INACTIVE state mobility  p. 2147

7.3  RRC_CONNECTED state mobility  p. 2153

7.4  Timing  p. 2256

7.5  Signalling characteristics  p. 2270

7.6  Measurement procedures  p. 2500

7.7  Measurement performance requirements  p. 2631

8  E-UTRA - NR inter-RAT with E-UTRA serving cell  p. 3148

8.0  General  p. 3148

8.1  Void

8.2  RRC_IDLE state mobility  p. 3148

8.3  RRC_CONNECTED state mobility  p. 3179

8.4  Measurement procedures  p. 3185

8.5  Measurement performance requirements  p. 3251

9  NR sidelink  p. 3285

9.1  NR sidelink in FR1  p. 3285

10  EN-DC Tests with NR PSCell under CCA and Other NR Cells in FR1  p. 3360

10.0  General  p. 3360

10.1  RRC_CONNECTED state mobility  p. 3361

10.2  Timing  p. 3389

10.3  Signalling characteristics  p. 3402

10.4  Measurement procedures  p. 3502

10.5  Measurement Performance  p. 3643

11  NR Standalone Tests with NR PCell under CCA and Other NR Cells in FR1  p. 3725

11.0  General  p. 3725

11.1  RRC_IDLE state mobility  p. 3726

11.2  RRC_CONNECTED state mobility  p. 3726

11.3  Timing  p. 3738

11.4  Signalling characteristics  p. 3750

11.5  Measurement procedure  p. 3831

11.6  Measurement Performance  p. 3916

12  FFS  p. 4013

13  FFS  p. 4013

14  NR standalone tests for Satellite access  p. 4013

14.0  General  p. 4013

14.1  RRC_IDLE state mobility  p. 4017

14.2  RRC_CONNECTED state mobility  p. 4043

14.3  Timing for Satellite Access  p. 4063

14.4  Signalling characteristics  p. 4076

14.5  Measurement procedure  p. 4076

14.6  Measurement Performance Requirements  p. 4139

15  FFS  p. 4165

16  NR standalone tests with all NR cells in FR1 for RedCap  p. 4166

16.0  General  p. 4166

16.1  RRC_IDLE state mobility  p. 4166

16.2  RRC_INACTIVE state mobility for RedCap  p. 4262

16.3  RRC_CONNECTED state mobility for RedCap  p. 4271

16.4  Timing for RedCap  p. 4381

16.5  Signalling characteristics for RedCap  p. 4396

16.6  Measurement procedures for RedCap  p. 4532

16.7  Measurement performance requirements for RedCap  p. 4723

17  NR standalone tests with at least one NR cell in FR2 for RedCap  p. 4852

17.1  RRC_IDLE state mobility  p. 4852

17.2  RRC_INACTIVE state mobility for RedCap  p. 4884

17.3  RRC_CONNECTED state mobility for RedCap  p. 4888

17.4  Timing for RedCap  p. 4921

17.5  Signalling characteristics for RedCap  p. 4931

17.6  Measurement procedures for RedCap  p. 5026

17.7  Measurement performance requirements for RedCap  p. 5082

18  E-UTRA - NR inter-RAT with E-UTRA serving cell for RedCap  p. 5116

18.1  RRC_IDLE state mobility for RedCap  p. 5116

18.2  RRC_CONNECTED state mobility for RedCap  p. 5120

18.3  Measurement procedure for RedCap  p. 5132

A (Normative)  RRM test configurations  p. 5161

A.1  Reference measurement channels  p. 5161

A.2  Reference OCGN configuration  p. 5190

A.3  Reference SSB configuration  p. 5193

A.3A  Reference SSB configuration under CCA  p. 5194

A.3B  Reference SSB configuration for RedCap  p. 5196

A.4  Reference SMTC configuration  p. 5197

A.4A  Reference SMTC configuration for RedCap  p. 5197

A.5  Reference DRX configurations  p. 5198

A.6  EN-DC test setup  p. 5198

A.6A  NR FR1-FR2 test setup  p. 5202

A.6B  EN-DC test setup with unlicensed bands  p. 5202

A.7  Reference PRACH configurations  p. 5203

A.7A  Reference MsgA configurations  p. 5207

A.8  Reference BWP configurations  p. 5214

A.8A  Reference BWP configurations for RedCap  p. 5215

A.9  Angle of Arrival (AoA) for FR2 RRM test cases  p. 5215

A.10  TCI State Configuration  p. 5217

A.10A  Unified TCI State Configuration  p. 5218

A.11  NR sidelink communication  p. 5219

A.12  Discovery Burst Transmission Window configuration under CCA  p. 5223

A.13  Channel bandwidth (CBW) configurations  p. 5223

A.14  Satellite access configuration  p. 5224

A.15  SRS Configurations  p. 5225

B (Normative)  Conditions for RRM requirements applicability for operating bands  p. 5227

B.1  Conditions for NR RRC_IDLE state mobility  p. 5227

B.2  Conditions for NR RRC_CONNECTED state  p. 5232

B.3  RRM requirement exceptions  p. 5245

B.4  Conditions for NR sidelink  p. 5247

B.5  High level test procedure for SAN RRM tests  p. 5248

C (Normative)  Downlink physical channels and propagation conditions  p. 5249

C.1  Downlink physical channels  p. 5249

C.2  Propagation conditions  p. 5250

D (Normative)  Deviations from standard test configuration  p. 5253

D.1  Test cases with different numerologies  p. 5253

D.2  EN-DC test cases with different EN-DC configurations  p. 5253

D.3  Carrier aggregation test cases with different CA configurations  p. 5253

D.4  Antenna connection for 4Rx capable UEs  p. 5253

D.4A  Antenna configurations with unlicensed bands for 4Rx capable UEs  p. 5256

D.5  Test Cases with Different Channel Bandwidths  p. 5258

D.6  Test Cases for Synchronous and Asynchronous DC Operations  p. 5258

D.7  CCA model  p. 5258

D.8  Test Cases in SA and EN-DC Operations  p. 5260

E (Normative)  Cell configuration mapping  p. 5262

E.0  General  p. 5262

E.1  Test frequency selection  p. 5262

E.2  Cell configuration mapping for EN-DC FR1 test cases in Chapter 4  p. 5264

E.3  Cell configuration mapping for EN-DC FR2 test cases in Chapter 5  p. 5267

E.4  Cell configuration mapping for SA FR1 test cases in Chapter 6  p. 5271

E.5  Cell configuration mapping for SA FR2 test cases in Chapter 7  p. 5276

E.6  Cell configuration mapping for E-UTRAN - SA test cases in Chapter 8  p. 5280

E.7  Cell configuration mapping for NR sidelink test cases in Chapter 9  p. 5282

E.8  Cell configuration mapping for EN-DC FR1 Shared Spectrum test cases in Chapter 10  p. 5282

E.9  Cell configuration mapping for SA FR1 Shared Spectrum test cases in Chapter 11  p. 5285

E.10_13  -  p. 5286

E.14  Cell configuration mapping for SA FR1 test cases for RedCap in Chapter 16  p. 5286

E.15  Cell configuration mapping for SA FR2 test cases for RedCap in Chapter 17  p. 5293

E.16  Cell configuration mapping for E-UTRAN - SA test cases for RedCap in Chapter 18  p. 5295

F (Normative)  Measurement uncertainties and test tolerances  p. 5297

F.1  Measurement uncertainties and test tolerances for FR1 and FR2  p. 5297

G (Normative)  Statistical testing  p. 5516

G.1  General  p. 5516

G.2  Statistical testing of delay and UE measurement performance in RRM tests  p. 5516

G.3  Statistical testing of NR sidelink CBR measurement tests  p. 5519

G.4  Theory to derive the numbers in Table G.2.3-1 (informative)  p. 5521

G.5  Theory to derive the numbers in Table G.3.3-1 (informative)  p. 5521

H (Normative)  Default message contents for RRM  p. 5529

H.1  Void

H.2  System information blocks message content exceptions  p. 5529

H.3  RRC message content exceptions  p. 5533

I (Normative)  RRM OTA procedures  p. 5584

I.0  Test applicability per permitted test method  p. 5584

I.1  Direct far field (DFF)  p. 5584

I.2  Direct far field (DFF) simplification  p. 5584

I.3  Indirect far field (IFF)  p. 5585

I.3A  Enhanced indirect far field (Enhanced IFF)  p. 5585

I.4  Procedures to search test directions for RRM FR2  p. 5585

I.5  Re-Positioning Approach for RRM FR2  p. 5586

$  Change history  p. 5590

Up   Top