Content for TR 37.901 Word version: 15.1.0
A Test Procedures
A.1 Purpose of annex
A.2 UE Application Layer Data Throughput Performance Test Procedures for HSPA
A.3 UE Application Layer Data Throughput Performance Test Procedures for LTE
A.4 UE Application Layer Data Throughput Performance Test Procedures for LTE CA
A Test Procedures p. 43
A.1 Purpose of annex p. 43
A.2 UE Application Layer Data Throughput Performance Test Procedures for HSPA p. 43
A.2.1 General p. 43
A.2.2 HSPA / FTP Downlink Performance p. 44
A.2.2.1 Definition p. 44
A.2.2.2 Test Purpose p. 44
A.2.2.3 Test Parameters p. 45
A.2.2.4 Test Description p. 45
A.2.2.4.1 Initial Conditions p. 45
A.2.2.4.2 Procedure p. 46
A.2.3 HSPA / UDP Downlink Performance p. 46
A.2.3.1 Definition p. 46
A.2.3.2 Test Purpose p. 46
A.2.3.3 Test Parameters p. 46
A.2.3.4 Test Description p. 47
A.2.3.4.1 Initial Conditions p. 47
A.2.3.4.2 Procedure p. 48
A.2.4 HSPA / FTP Uplink Performance p. 48
A.2.4.1 Definition p. 48
A.2.4.2 Test Purpose p. 48
A.2.4.3 Test Parameters p. 48
A.2.4.4 Test Description p. 49
A.2.4.4.1 Initial Conditions p. 49
A.2.4.4.2 Procedure p. 49
A.2.5 HSPA / UDP Uplink Performance p. 50
A.2.5.1 Definition p. 50
A.2.5.2 Test Purpose p. 50
A.2.5.3 Test Parameters p. 50
A.2.5.4 Test Description p. 51
A.2.5.4.1 Initial Conditions p. 51
A.2.5.4.2 Procedure p. 51
A.2.6 HSPA / Stress Test Performance p. 52
A.2.6.1 Definition p. 52
A.2.6.2 Test Purpose p. 52
A.2.6.3 Test Parameters p. 52
A.2.6.4 Test Description p. 53
A.2.6.4.1 Initial Conditions p. 53
A.2.6.4.2 Procedure p. 53
A.2.7 HSPA / UDP Power Sweep Performance p. 53
A.2.7.1 Definition p. 53
A.2.7.2 Test Purpose p. 53
A.2.7.3 Test Parameters p. 54
A.2.7.4 Test Description p. 54
A.2.7.4.1 Initial Conditions p. 54
A.2.7.4.2 Procedure p. 55
A.2.8 HSPA / Throughput vs. Geometry Factor Performance p. 55
A.2.8.1 Definition p. 55
A.2.8.2 Test Purpose p. 55
A.2.8.3 Test Parameters p. 55
A.2.8.4 Test Description p. 56
A.2.8.4.1 Initial Conditions p. 56
A.2.8.4.2 Procedure p. 56
A.3 UE Application Layer Data Throughput Performance Test Procedures for LTE p. 57
A.3.1 General p. 57
A.3.2 LTE / FTP Downlink Performance p. 61
A.3.2.1 LTE / FTP Downlink / PDSCH Single Antenna Port Performance (Cell-Specific Reference Symbols) p. 61
A.3.2.1.1 Definition p. 61
A.3.2.1.2 Test Purpose p. 61
A.3.2.1.3 Test Parameters p. 61
A.3.2.1.4 Test Description p. 62
A.3.2.1.4.1 Initial Conditions p. 62
A.3.2.1.4.2 Procedure p. 62
A.3.2.2 LTE / FTP Downlink / PDSCH Transmit Diversity Performance (Cell-Specific Reference Symbols) p. 63
A.3.2.2.1 Definition p. 63
A.3.2.2.2 Test Purpose p. 63
A.3.2.2.3 Test Parameters p. 63
A.3.2.2.4 Test Description p. 64
A.3.2.2.4.1 Initial Conditions p. 64
A.3.2.2.4.2 Procedure p. 64
A.3.2.3 LTE / FTP Downlink / PDSCH Open Loop Spatial Multiplexing Performance (Cell-Specific Reference Symbols) p. 65
A.3.2.3.1 Definition p. 65
A.3.2.3.2 Test Purpose p. 65
A.3.2.3.3 Test Parameters p. 65
A.3.2.3.4 Test Description p. 66
A.3.2.3.4.1 Initial Conditions p. 66
A.3.2.3.4.2 Procedure p. 66
A.3.2.4 LTE / FTP Downlink / PDSCH Closed Loop Spatial Multiplexing Performance (Cell-Specific Reference Symbols) p. 67
A.3.2.4.1 Definition p. 67
A.3.2.4.2 Test Purpose p. 67
A.3.2.4.3 Test Parameters p. 67
A.3.2.4.4 Test Description p. 69
A.3.2.4.4.1 Initial Conditions p. 69
A.3.2.4.4.2 Procedure p. 69
A.3.2.5 LTE / FTP Downlink / PDSCH Single-layer Spatial Multiplexing Performance (Port 5, UE-Specific Reference Symbols) p. 69
A.3.2.5.1 Definition p. 69
A.3.2.5.2 Test Purpose p. 70
A.3.2.5.3 Test Parameters p. 70
A.3.2.5.4 Test Description p. 71
A.3.2.5.4.1 Initial Conditions p. 71
A.3.2.5.4.2 Procedure p. 71
A.3.2.6 LTE / FTP Downlink / PDSCH Single-layer Spatial Multiplexing Performance (Port 7 or 8, UE-Specific Reference Symbols) p. 71
A.3.2.6.1 Definition p. 71
A.3.2.6.2 Test Purpose p. 72
A.3.2.6.3 Test Parameters p. 72
A.3.2.6.4 Test Description p. 73
A.3.2.6.4.1 Initial Conditions p. 73
A.3.2.6.4.2 Procedure p. 73
A.3.2.7 LTE / FTP Downlink / PDSCH Dual-layer Spatial Multiplexing Performance (port 7 and 8, User-Specific Reference Symbols) p. 74
A.3.2.7.1 Definition p. 74
A.3.2.7.2 Test Purpose p. 74
A.3.2.7.3 Test Parameters p. 74
A.3.2.7.4 Test Description p. 76
A.3.2.7.4.1 Initial Conditions p. 76
A.3.2.7.4.2 Procedure p. 76
A.3.3 LTE / UDP Downlink Performance p. 76
A.3.3.1 LTE / UDP Downlink / PDSCH Single Antenna Port Performance (Cell-Specific Reference Symbols) p. 76
A.3.3.1.1 Definition p. 76
A.3.3.1.2 Test Purpose p. 77
A.3.3.1.3 Test Parameters p. 77
A.3.3.1.4 Test Description p. 78
A.3.3.1.4.1 Initial Conditions p. 78
A.3.3.1.4.2 Procedure p. 78
A.3.3.2 LTE / UDP Downlink / PDSCH Transmit Diversity Performance (Cell-Specific Reference Symbols) p. 78
A.3.3.2.1 Definition p. 78
A.3.3.2.2 Test Purpose p. 79
A.3.3.2.3 Test Parameters p. 79
A.3.3.2.4 Test Description p. 80
A.3.3.2.4.1 Initial Conditions p. 80
A.3.3.2.4.2 Procedure p. 80
A.3.3.3 LTE / UDP Downlink / PDSCH Open Loop Spatial Multiplexing Performance (Cell-Specific Reference Symbols) p. 80
A.3.3.3.1 Definition p. 80
A.3.3.3.2 Test Purpose p. 81
A.3.3.3.3 Test Parameters p. 81
A.3.3.3.4 Test Description p. 82
A.3.3.3.4.1 Initial Conditions p. 82
A.3.3.3.4.2 Procedure p. 82
A.3.3.4 LTE / UDP Downlink / PDSCH Closed Loop Spatial Multiplexing Performance (Cell-Specific Reference Symbols) p. 83
A.3.3.4.1 Definition p. 83
A.3.3.4.2 Test Purpose p. 83
A.3.3.4.3 Test Parameters p. 83
A.3.3.4.4 Test Description p. 85
A.3.3.4.4.1 Initial Conditions p. 85
A.3.3.4.4.2 Procedure p. 85
A.3.3.5 LTE / UDP Downlink / PDSCH Single-layer Spatial Multiplexing Performance (port 5, User-Specific Reference Symbols) p. 85
A.3.3.5.1 Definition p. 85
A.3.3.5.2 Test Purpose p. 86
A.3.3.5.3 Test Parameters p. 86
A.3.3.5.4 Test Description p. 87
A.3.3.5.4.1 Initial Conditions p. 87
A.3.3.5.4.2 Procedure p. 87
A.3.3.6 LTE / UDP Downlink / PDSCH Single-layer Spatial Multiplexing Performance (Port 7 or 8, UE-Specific Reference Symbols) p. 87
A.3.3.6.1 Definition p. 87
A.3.3.6.2 Test Purpose p. 88
A.3.3.6.3 Test Parameters p. 88
A.3.3.6.4 Test Description p. 89
A.3.3.6.4.1 Initial Conditions p. 89
A.3.3.6.4.2 Procedure p. 89
A.3.3.7 LTE / UDP Downlink / PDSCH Dual-layer Spatial Multiplexing Performance (port 7 and 8, User-Specific Reference Symbols) p. 90
A.3.3.7.1 Definition p. 90
A.3.3.7.2 Test Purpose p. 90
A.3.3.7.3 Test Parameters p. 90
A.3.3.7.4 Test Description p. 92
A.3.3.7.4.1 Initial Conditions p. 92
A.3.3.7.4.2 Procedure p. 92
A.3.4 LTE / FTP Uplink Performance p. 92
A.3.4.1 LTE / FTP Uplink / PUSCH Single Antenna Port Performance p. 92
A.3.4.1.1 Definition p. 92
A.3.4.1.2 Test Purpose p. 93
A.3.4.1.3 Test Parameters p. 93
A.3.4.1.4 Test Description p. 93
A.3.4.1.4.1 Initial Conditions p. 93
A.3.4.1.4.2 Procedure p. 93
A.3.5 LTE / UDP Uplink Performance p. 94
A.3.5.1 LTE / UDP Uplink / PUSCH Single Antenna Port Performance p. 94
A.3.5.1.1 Definition p. 94
A.3.5.1.2 Test Purpose p. 94
A.3.5.1.3 Test Parameters p. 94
A.3.5.1.4 Test Description p. 94
A.3.5.1.4.1 Initial Conditions p. 94
A.3.5.1.4.2 Procedure p. 95
A.3.6 LTE / Stress Test Performance p. 95
A.3.6.1 LTE / Stress Test Performance / PDSCH Transmit Diversity Performance (Cell-Specific Reference Symbols) p. 95
A.3.6.1.1 Definition p. 95
A.3.6.1.2 Test Purpose p. 96
A.3.6.1.3 Test Parameters p. 96
A.3.6.1.4 Test Description p. 97
A.3.6.1.4.1 Initial Conditions p. 97
A.3.6.1.4.2 Procedure p. 97
A.3.6.2 LTE / Stress Test Performance / PDSCH Open Loop Spatial Multiplexing Performance (Cell-Specific Reference Symbols) p. 97
A.3.6.2.1 Definition p. 97
A.3.6.2.2 Test Purpose p. 97
A.3.6.2.3 Test Parameters p. 98
A.3.6.2.4 Test Description p. 98
A.3.6.2.4.1 Initial Conditions p. 98
A.3.6.2.4.2 Procedure p. 99
A.3.7 LTE / UDP Power Sweep Performance p. 99
A.3.7.1 LTE / UDP Power Sweep Performance / PDSCH Transmit Diversity Performance (Cell-Specific Reference Symbols) p. 99
A.3.7.1.1 Definition p. 99
A.3.7.1.2 Test Purpose p. 99
A.3.7.1.3 Test Parameters p. 100
A.3.7.1.4 Test Description p. 101
A.3.7.1.4.1 Initial Conditions p. 101
A.3.7.1.4.2 Procedure p. 101
A.3.7.2 LTE / UDP Power Sweep Performance / PDSCH Open Loop Spatial Multiplexing Performance (Cell-Specific Reference Symbols) p. 102
A.3.7.2.1 Definition p. 102
A.3.7.2.2 Test Purpose p. 102
A.3.7.2.3 Test Parameters p. 102
A.3.7.2.4 Test Description p. 103
A.3.7.2.4.1 Initial Conditions p. 103
A.3.7.2.4.2 Procedure p. 104
A.3.8 LTE / UDP Downlink vs. SNR Performance p. 104
A.3.8.1 LTE / UDP Downlink vs. SNR Performance / PDSCH Transmit Diversity Performance (Cell-Specific Reference Symbols) p. 104
A.3.8.1.1 Definition p. 104
A.3.8.1.2 Test Purpose p. 104
A.3.8.1.3 Test Parameters p. 104
A.3.8.1.4 Test Description p. 105
A.3.8.1.4.1 Initial Conditions p. 105
A.3.8.1.4.2 Procedure p. 106
A.3.8.2 LTE / UDP Downlink vs. SNR Performance / PDSCH Open Loop Spatial Multiplexing Performance (Cell-Specific Reference Symbols) p. 106
A.3.8.2.1 Definition p. 106
A.3.8.2.2 Test Purpose p. 106
A.3.8.2.3 Test Parameters p. 106
A.3.8.2.4 Test Description p. 108
A.3.8.2.4.1 Initial Conditions p. 108
A.3.8.2.4.2 Procedure p. 109
A.3.8.3 LTE / UDP Downlink vs. SNR Performance / PDSCH Closed Loop Spatial Multiplexing Performance (Cell-Specific Reference Symbols) p. 109
A.3.8.3.1 Definition p. 109
A.3.8.3.2 Test Purpose p. 109
A.3.8.3.3 Test Parameters p. 109
A.3.8.3.4 Test Description p. 111
A.3.8.3.4.1 Initial Conditions p. 111
A.3.8.3.4.2 Procedure p. 112
A.3.8.4 LTE / UDP Downlink vs. SNR Performance / PDSCH Closed Loop Spatial Multiplexing using a single transmission layer Performance (Cell-Specific Reference Symbols) p. 112
A.3.8.4.1 Definition p. 112
A.3.8.4.2 Test Purpose p. 112
A.3.8.4.3 Test Parameters p. 112
A.3.8.4.4 Test Description p. 113
A.3.8.4.4.1 Initial Conditions p. 113
A.3.8.4.4.2 Procedure p. 114
A.4 UE Application Layer Data Throughput Performance Test Procedures for LTE CA p. 114
A.4.1 General p. 114
A.4.2 LTE CA / FTP Downlink Performance p. 118
A.4.2.1 LTE CA / FTP Downlink / PDSCH Transmit Diversity Performance (Cell-Specific Reference Symbols) p. 118
A.4.2.1.1 Definition p. 118
A.4.2.1.2 Test Purpose p. 118
A.4.2.1.3 Test Parameters p. 118
A.4.2.1.4 Test Description p. 119
A.4.2.1.4.1 Initial Conditions p. 119
A.4.2.1.4.2 Procedure p. 119
A.4.2.1.4.3 Message Contents p. 120
A.4.2.2 LTE CA / FTP Downlink / PDSCH Open Loop Spatial Multiplexing Performance (Cell-Specific Reference Symbols) p. 120
A.4.2.2.1 Definition p. 120
A.4.2.2.2 Test Purpose p. 120
A.4.2.2.3 Test Parameters p. 120
A.4.2.2.4 Test Description p. 122
A.4.2.2.4.1 Initial Conditions p. 122
A.4.2.2.4.2 Procedure p. 122
A.4.2.2.4.3 Message Contents p. 123
A.4.2.3 LTE CA / FTP Downlink / PDSCH Closed Loop Spatial Multiplexing Performance (Cell-Specific Reference Symbols) p. 125
A.4.2.3.1 Definition p. 125
A.4.2.3.2 Test Purpose p. 125
A.4.2.3.3 Test Parameters p. 125
A.4.2.3.4 Test Description p. 127
A.4.2.3.4.1 Initial Conditions p. 127
A.4.2.3.4.2 Procedure p. 127
A.4.2.3.4.3 Message Contents p. 128
A.4.2.4 LAA / FTP Downlink / PDSCH Open Loop Spatial Multiplexing Performance (Cell-Specific Reference Symbols) p. 130
A.4.2.4.1 Definition p. 130
A.4.2.4.2 Test Purpose p. 130
A.4.2.4.3 Test Parameters p. 130
A.4.2.4.4 Test Description p. 132
A.4.2.4.4.1 Initial Conditions p. 132
A.4.2.4.4.2 Procedure p. 132
A.4.2.4.4.3 Message Contents p. 133
A.4.2.5 LAA / FTP Downlink / PDSCH Closed Loop Spatial Multiplexing Performance (Cell-Specific Reference Symbols) p. 136
A.4.2.5.1 Definition p. 136
A.4.2.5.2 Test Purpose p. 136
A.4.2.5.3 Test Parameters p. 136
A.4.2.5.4 Test Description p. 137
A.4.2.5.4.1 Initial Conditions p. 137
A.4.2.5.4.2 Procedure p. 138
A.4.2.5.4.3 Message Contents p. 138
A.4.3 LTE CA / UDP Downlink Performance p. 141
A.4.3.1 LTE CA / UDP Downlink / PDSCH Transmit Diversity Performance (Cell-Specific Reference Symbols) p. 141
A.4.3.1.1 Definition p. 141
A.4.3.1.2 Test Purpose p. 141
A.4.3.1.3 Test Parameters p. 141
A.4.3.1.4 Test Description p. 142
A.4.3.1.4.1 Initial Conditions p. 142
A.4.3.1.4.2 Procedure p. 142
A.4.3.1.4.3 Message Contents p. 143
A.4.3.2 LTE CA / UDP Downlink / PDSCH Open Loop Spatial Multiplexing Performance (Cell-Specific Reference Symbols) p. 143
A.4.3.2.1 Definition p. 143
A.4.3.2.2 Test Purpose p. 143
A.4.3.2.3 Test Parameters p. 143
A.4.3.2.4 Test Description p. 145
A.4.3.2.4.1 Initial Conditions p. 145
A.4.3.2.4.2 Procedure p. 145
A.4.3.2.4.3 Message Contents p. 146
A.4.3.3 LTE CA / UDP Downlink / PDSCH Closed Loop Spatial Multiplexing Performance (Cell-Specific Reference Symbols) p. 148
A.4.3.3.1 Definition p. 148
A.4.3.3.2 Test Purpose p. 148
A.4.3.3.3 Test Parameters p. 148
A.4.3.3.4 Test Description p. 150
A.4.3.3.4.1 Initial Conditions p. 150
A.4.3.3.4.2 Procedure p. 150
A.4.3.3.4.3 Message Contents p. 151
A.4.3.4 LAA / UDP Downlink / PDSCH Open Loop Spatial Multiplexing Performance (Cell-Specific Reference Symbols) p. 153
A.4.3.4.1 Definition p. 153
A.4.3.4.2 Test Purpose p. 153
A.4.3.4.3 Test Parameters p. 153
A.4.3.4.4 Test Description p. 155
A.4.3.4.4.1 Initial Conditions p. 155
A.4.3.4.4.2 Procedure p. 155
A.4.3.4.4.3 Message Contents p. 156
A.4.3.5 LAA / UDP Downlink / PDSCH Closed Loop Spatial Multiplexing Performance (Cell-Specific Reference Symbols) p. 159
A.4.3.5.1 Definition p. 159
A.4.3.5.2 Test Purpose p. 159
A.4.3.5.3 Test Parameters p. 159
A.4.3.5.4 Test Description p. 160
A.4.3.5.4.1 Initial Conditions p. 160
A.4.3.5.4.2 Procedure p. 161
A.4.3.5.4.3 Message Contents p. 161
