Tech-invite 3GPPspace IETFspace

21 22 23 24 25 26 27 28 29 31 32 33 34 35 36 37 38 4‑5x

Content for TR 37.806 Word version: 11.0.0

1… 2…

2 References p. 7

3 Definitions, symbols and abbreviations p. 8

3.1 Definitions p. 8

3.2 Symbols p. 8

3.3 Abbreviations p. 8

4 Background p. 9

4.1 Task description p. 9

5 Frequency band arrangements p. 10

5.1 Regulatory framework for bands in the range and their use p. 10

5.1.1 The allocation in the Radio Regulations p. 10

5.1.2 Use of the additional spectrum in various regions p. 10

5.1.2.1 Region 1 p. 10

5.1.2.2 Region 2 p. 10

5.1.2.3 Region 3 p. 11

5.2 Possible duplexer arrangements p. 12

5.2.1 Split duplexer arrangement p. 12

5.2.1.1 UE aspects p. 12

5.2.1.2 BS aspects p. 13

5.2.2 Sub-band arrangement p. 13

5.2.3 UE duplexer filter characteristics for proposed sub-bands p. 15

5.2.3.1 The range 806-824/851-869 MHz p. 15

5.2.3.1.1 Filter characteristics for SAW technology p. 15

5.2.3.2 The range 814-849/859-894MHz p. 18

5.2.3.2.1 Filter characteristics for SAW technology and comparison to Band 5 p. 18

5.2.3.2.2 Filter characteristics for FBAR technology p. 20

5.2.3.2.3 Possible specification and comparison with other bands in the range p. 23

5.2.4 BS duplexer filter characteristics for proposed sub-bands p. 24

5.2.4.1 The range 806-824/851-869 MHz p. 24

5.2.4.1.1 RX Filter characteristics p. 24

5.2.4.1.2 TX Filter characteristics p. 25

5.2.4.2 The range 814-849/859-894 MHz p. 26

5.2.4.2.1 Filter characteristics for a cavity filter and comparison to Band 5 p. 27

5.3 Specific deployments aspects p. 28

5.3.1 Region 1 p. 29

5.3.2 Region 2 p. 29

5.3.2.1 Emission requirements p. 29

5.3.2.2 Deployment scenario p. 29

5.3.3 Region 3 p. 30

5.3.4 Requirements for UE(s) roaming into legacy bands in the 814-849/859-894 MHz range p. 31

5.3.4.1 Handling of band support in UE radio capability signaling p. 31

5.3.4.2 UE receiver requirements: out-of-band blocking p. 32

6 Study of UTRA requirements p. 33

6.1 Band and channel arrangement p. 33

6.2 Coexistence with other technologies p. 33

6.3 Specific UE requirements p. 33

6.3.1 Transmitter characteristics p. 33

6.3.1.1 UE MOP p. 33

6.3.1.2 Spurious emissions p. 34

6.3.2 Receiver characteristics p. 34

6.3.2.1 Diversity characteristics p. 34

6.3.2.2 Reference sensitivity p. 35

6.3.2.2.1 Void

6.3.2.2.2 The sub-band 814-849/859-894 MHz p. 35

6.3.2.3 Maximum input level p. 35

6.3.2.4 Adjacent Channel Selectivity (ACS) p. 35

6.3.2.5 Blocking Characteristics p. 35

6.3.2.5.1 In-band blocking p. 35

6.3.2.5.2 Out-of-band blocking p. 36

6.3.2.5.3 Narrow band blocking p. 36

6.4 BS specific requirements p. 36

6.4.1 Transmitter characteristics p. 36

6.4.1.1 Lower sub-band p. 36

6.4.1.1.1 Spurious emissions p. 36

6.4.1.2 Upper sub-band p. 37

6.4.1.2.1 Operating band unwanted emissions p. 37

6.4.1.2.2 Spurious emissions p. 37

6.4.2 Receiver characteristics p. 39

6.4.2.1 Lower sub-band p. 39

6.4.2.1.1 Blocking p. 39

6.4.2.2 Upper sub-band p. 39

6.4.2.2.1 Blocking p. 39

6.4.2.2.2 Intermodulation p. 40

7 Study of E-UTRA requirements p. 40

7.1 Band and channel arrangement p. 41

7.1.1 E-UTRA operating band and channel arrangement p. 41

7.1.2 MSR BS operating band and categories p. 41

7.2 Coexistence with other technologies p. 41

7.2.1 Coexistence scenarios for the range 806-824/851-869 MHz and 814-849/859-894 MHz p. 41

7.2.1.1 LTE vs. Public Safety p. 42

7.2.1.2 LTE vs. iDEN and other users of the band p. 42

7.2.1.3 LTE UE to LTE UE and LTE BS to LTEBS coexistence issues at 849-851 MHz p. 43

7.2.1.4 Void

7.2.1.5 Conclusions p. 44

7.2.2 The range 814-849/859-894 MHz p. 44

7.2.2.1 Region 2 specific p. 44

7.2.2.1.1 UE interference into Public Safety in the United States p. 45

7.2.2.1.1.1 UE interference into Public Safety below Band 26 p. 45

7.2.2.1.1.2 UE interference into Public Safety above Band 26 p. 49

7.2.2.1.2 BS interference into Public Safety p. 50

7.2.2.1.3 UE interference into another iDEN operator within the upper band p. 53

7.2.2.1.4 BS interference into another iDEN operator within the upper band p. 53

7.2.3 The range 806-824/851-869 MHz p. 53

7.2.3.1 LTE vs. Broadcast TV below the band p. 54

7.2.4 BS coexistence between e850 bands and APT700 p. 59

7.2.4.1 BS Coexistence between e850 bands p. 59

7.2.4.2 BS Coexistence lower e850 and APT700 p. 59

7.2.4.3 lower e850 band re-arrangement p. 59

7.3 UE specific requirements p. 60

7.3.1 Transmitter characteristics p. 60

7.3.1.1 Transmit power p. 60

7.3.1.1.1 The sub-band 807-824/852-869 MHz p. 60

7.3.1.1.1.1 UE maximum output power p. 60

7.3.1.1.2 The sub-band 814-849/859-894 MHz p. 61

7.3.1.1.2.1 UE maximum output power p. 61

7.3.1.2 Spurious emissions p. 61

7.3.1.2.1 The sub-band 807-824/852-869 MHz p. 61

7.3.1.2.1.1 UE spurious emissions towards Band 28 (APT700 FDD) p. 61

7.3.1.2.2 The sub-band 814-849/859-894 MHz p. 62

7.3.2 Receiver characteristics p. 67

7.3.2.1 Diversity characteristics p. 67

7.3.2.2 Reference sensitivity p. 67

7.3.2.2.1 The sub-band 807-824/852-869 MHz p. 67

7.3.2.2.2 The sub-band 814-849/859-894 MHz p. 68

7.4 BS specific requirements p. 68

7.4.1 Transmitter characteristics p. 68

7.4.1.1 Lower sub-band p. 68

7.4.1.1.1 Operating band unwanted emissions p. 69

7.4.1.1.2 Spurious emissions p. 69

7.4.1.2 Upper sub-band p. 72

7.4.1.2.1 Operating band unwanted emissions p. 72

7.4.1.2.2 Spurious emissions p. 72

7.4.2 Receiver characteristics p. 74

7.4.2.1 Reference sensitivity p. 74

7.4.2.2 Dynamic range p. 74

7.4.2.3 In-channel selectivity p. 74

7.4.2.4 Blocking p. 74

7.4.2.4.1 Lower sub-band BS Rx blocking p. 74

7.4.2.4.2 Upper sub-band BS Rx blocking p. 75

8 Summary of changes to UTRA specifications p. 78

8.1 Required changes to TS 25.101 p. 78

8.2 Required changes to TS 25.104 p. 78

8.3 Required changes to TS 25.113 p. 79

8.4 Required changes to TS 34.124 p. 79

8.5 Required changes to TS 25.133 p. 79

8.6 Required changes to TS 25.141 p. 80

8.7 Required changes to TS 25.307 p. 81

8.8 Required changes to TS 25.331 p. 81

8.9 Required changes to TS 25.461 p. 82

8.10 Required changes to TS 25.466 p. 82

9 Summary of changes to E-UTRA specifications p. 82

9.1 Required changes to TS 36.101 p. 82

9.2 Required changes to TS 36.104 p. 82

9.3 Required changes to TS 36.113 p. 83

9.4 Required changes to TS 36.124 p. 83

9.5 Required changes to TS 36.133 p. 83

9.6 Required changes to TS 36.141 p. 84

9.7 Required changes to TS 36.307 p. 85

9.8 Required changes to TS 37.104 p. 85

9.9 Required changes to TS 37.113 p. 86

9.10 Required changes to TS 37.141 p. 86

A Calculation of the reference sensitivity p. 88

A.1 The transmitter configuration and transmitter noise p. 88

A.1.1 Two TX/RX branches p. 88

A.1.2 One main TX/RX branch and one RX-only diversity port p. 89

A.2 What to use? p. 89

B LTE and PSNB simulation parameters p. 90

B.1 LTE and NB PS system parameters p. 90

B.2 NBPS/LTE System Layout p. 90

$ Change history p. 92