Content for TR 37.802 Word version: 10.1.0
2 References
3 Definitions, symbols and abbreviations
4 General
5 Non-contiguous deployment scenarios
6 Transmitter characteristics
7 Receiver characteristics
8 Test specification
$ Change history
2 References p. 6
3 Definitions, symbols and abbreviations p. 7
4 General p. 10
4.1 Work item objective p. 10
4.2 Relation to other RAN and GERAN specifications p. 11
4.3 Regional requirements p. 11
4.4 Manufacturer's declaration p. 11
5 Non-contiguous deployment scenarios p. 13
5.1 Definitions and terminology p. 13
5.2 Operator scenarios p. 15
5.3 Scenario implications p. 18
5.4 Generic approach p. 18
5.5 Principles for implementing requirements for non-contiguous spectrum p. 19
6 Transmitter characteristics p. 19
6.1 General p. 19
6.2 Base station output power p. 19
6.3 Output power dynamics p. 20
6.4 Transmit ON/OFF power p. 20
6.5 Transmitted signal quality p. 20
6.5.1 Modulation quality p. 20
6.5.2 Frequency error p. 20
6.5.3 Time alignment between transmitter branches p. 20
6.6 Unwanted emissions p. 20
6.6.1 Transmitter spurious emissions p. 20
6.6.2 Operating band unwanted emissions p. 20
6.6.3 Occupied bandwidth p. 22
6.6.4 Adjacent Channel Leakage power Ratio (ACLR) p. 22
6.6.5 Application of necessary bandwidth for non-contiguous spectrum p. 22
6.7 Transmitter intermodulation p. 23
7 Receiver characteristics p. 24
7.1 General p. 24
7.2 Reference sensitivity level p. 24
7.3 Dynamic range p. 24
7.4 In-band selectivity and blocking p. 24
7.5 Out-of-band blocking p. 25
7.6 Receiver spurious emissions p. 25
7.7 Receiver intermodulation p. 25
7.8 In-channel selectivity p. 26
8 Test specification p. 26
8.1 General p. 26
8.2 Test configurations p. 26
A Void
$ Change history p. 29
