Content for TR 36.904 Word version: 18.1.0
1 Scope p. 5
The present document specifies a general method used to derive Test Tolerances for UE radio reception conformance tests in TS 36.521-1 and TS 36.521-4 and establishes a system for relating the Test Tolerances to the measurement uncertainties of the Test System.
The test cases which have been analysed to determine Test Tolerances are included as .zip files.
The present document is applicable from Release 10 up to the release indicated on the front page of the present Terminal conformance specifications.
2 References p. 5
The following documents contain provisions which, through reference in this text, constitute provisions of the present document.
- References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific.
- For a specific reference, subsequent revisions do not apply.
- For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document.
[1]
TR 21.905: "Vocabulary for 3GPP Specifications".
[2]
TS 36.521-1: "User Equipment (UE) conformance specification, Radio transmission and reception Part 1: conformance testing".
[3]
ETSI ETR 273-1-2: "Improvement of radiated methods of measurement (using test sites) and evaluation of the corresponding measurement uncertainties; Part 1: Uncertainties in the measurement of mobile radio equipment characteristics; Sub-part 2: Examples and annexes".
[4]
TS 36.521-4: "Evolved Universal Terrestrial Radio Access (E-UTRA);User Equipment (UE) conformance specification;Radio transmission and reception; Part 4: Satellite access Radio Frequency (RF) and performance Conformance Testing".
3 Definitions, symbols and abbreviations p. 5
3.1 Definitions p. 5
For the purposes of the present document, the terms and definitions given in TR 21.905 and the following apply.
A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905.
Other definitions used in the present document are listed in TS 36.521-1.
3.2 Symbols p. 6
Symbols used in the present document are listed in TR 21.905, TS 36.521-1.
3.3 Abbreviations p. 6
For the purposes of the present document, the abbreviations given in TR 21.905 apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905.
Other abbreviations used in the present document are listed in TS 36.521-1.
