Content for TR 36.807 Word version: 10.0.0
2 References
3 Symbols and abbreviations
4 General
5 Operating bands and channel arrangement
6 Transmitter characteristics
7 Receiver characteristics
8 CA Co-existence scenarios relating to OOB and Spurious emission
9 CPE
A CA deployment scenarios
B Changes to TS 36.101
$ Change history
2 References p. 7
3 Symbols and abbreviations p. 7
3.1 Symbols p. 7
3.2 Abbreviations p. 8
4 General p. 8
4.1 Relationship between minimum requirements and test requirements p. 8
4.2 Applicability of minimum requirements p. 8
4.3 Applicability of minimum requirements (CA, ULMA, DLMA, CPE) p. 8
4.4 Method for specification of inter-band CA p. 9
5 Operating bands and channel arrangement p. 9
5.1 General p. 9
5.2 Void
5.3 Void
5.4 Void
5.5 Operating bands p. 9
5.5A CA Operating bands p. 9
5.6A CA Channel bandwidth p. 10
5.6.1 Channel bandwidths per operating band p. 14
5.6.1A Channel bandwidths per CA operating band p. 14
5.6.1B Channel bandwidths per operating band for UL MIMO p. 15
5.7 Channel arrangement p. 15
6 Transmitter characteristics p. 20
6.1 General p. 20
6.2 Transmit power p. 22
6.2.1 Void
6.2.2 UE Maximum Output Power p. 22
6.2.3 UE Maximum Output power for modulation / channel bandwidth p. 23
6.2.4 UE Maximum Output Power with additional requirements p. 36
6.2.5 Configured transmitted Power p. 37
6.3 Output power dynamics p. 37
6.3.1 Void
6.3.2 Minimum output power p. 37
6.3.3 Transmit OFF power p. 38
6.3.4 ON/OFF time mask p. 39
6.3.5 Power Control p. 41
6.4 Void
6.5 Transmit signal quality p. 42
6.6 Output RF spectrum emissions p. 46
6.6B Output RF spectrum emissions p. 46
6.6.1 Occupied bandwidth p. 46
6.6.2 Out of band emission p. 47
6.6.2.1 Spectrum emission mask p. 47
6.6.2.2 Additional Spectrum Emission Mask p. 47
6.6.2.3 Adjacent Channel Leakage Ratio p. 47
6.6.2.4 Additional ACLR requirements p. 49
6.6.3 Spurious emissions p. 49
6.7 Transmit intermodulation p. 51
6.8 Time alignment between transmitter branches for UL-MIMO p. 52
7 Receiver characteristics p. 53
7.1 General p. 53
7.2 Diversity characteristics p. 54
7.3 Reference sensitivity power level p. 54
7.4 Maximum input level p. 56
7.5 Adjacent Channel Selectivity (ACS) p. 57
7.6 Blocking characteristics p. 68
7.7 Spurious response p. 69
7.8 Intermodulation characteristics p. 69
7.9 Spurious emissions p. 70
8 CA Co-existence scenarios relating to OOB and Spurious emission p. 71
8.1 General p. 71
8.2 Intra - band CA p. 71
8.2.1 CA_40 p. 71
8.2.2 CA_1 p. 71
8.3 Inter - band CA p. 71
8.3.1 CA_1-5 p. 71
9 CPE p. 72
9.1 General p. 72
9.2 CPE deployment scenarios p. 72
9.3 CPE operating band p. 72
9.4 CPE UE Maximum Output Power p. 72
9.5 SEM and OOB emission p. 73
9.6 ACLR p. 73
9.7 FFS p. 101
9.8 Band 13 p. 101
A CA deployment scenarios p. 103
A.1 General p. 103
A.2 Intra - band Contiguous CA p. 103
A.3 Inter band Non - Contiguous CA p. 103
A.4 Intra - band Contiguous CA p. 107
B Changes to TS 36.101 p. 108
$ Change history p. 180
