Content for  TS 36.331  Word version:  18.2.0

5.3.1.1  RRC connection control  p. 77

5.3.1.2  Security  p. 79

5.3.1.2a  RN security  p. 81

5.3.1.3  Connected mode mobility  p. 81

5.3.1.4  Connection control in NB-IoT  p. 82

5.3.2.1  General  p. 83

5.3.2.2  Initiation  p. 84

5.3.2.3  Reception of the Paging message by the UE  p. 84

5.3.3.1  General  p. 86

5.3.3.1a  Conditions for establishing RRC Connection for sidelink communication/ discovery/ V2X sidelink communication/ NR sidelink communication  p. 89

5.3.3.1b  Conditions for initiating EDT  p. 90

5.3.3.1c  Conditions for initiating transmission using PUR  p. 91

5.3.3.1d  Condition for establishing RRC Connection in NTN  p. 91

5.3.3.2  Initiation  p. 91

5.3.3.3  Actions related to transmission of RRCConnectionRequest message  p. 99

5.3.3.3a  Actions related to transmission of RRCConnectionResumeRequest message  p. 100

5.3.3.3b  Actions related to transmission of RRCEarlyDataRequest message  p. 104

5.3.3.3c  UE actions upon receiving EDT fallback indication from lower layers  p. 104

5.3.3.4  Reception of the RRCConnectionSetup by the UE  p. 105

5.3.3.4a  Reception of the RRCConnectionResume by the UE  p. 111

5.3.3.4b  Reception of the RRCEarlyDataComplete by the UE  p. 116

5.3.3.5  Cell re-selection or cell selection while T300, T302, T303, T305, T306, T308 or T309 is running  p. 118

5.3.3.6  T300 expiry  p. 119

5.3.3.7  T302, T303, T305, T306, or T308 expiry or stop  p. 120

5.3.3.8  Reception of the RRCConnectionReject by the UE  p. 121

5.3.3.9  Abortion of RRC connection establishment  p. 122

5.3.3.9a  Abortion of early security reactivation  p. 123

5.3.3.10  Handling of SSAC related parameters  p. 123

5.3.3.11  Access barring check  p. 124

5.3.3.12  EAB check  p. 124

5.3.3.13  Access barring check for ACDC  p. 126

5.3.3.14  Access Barring check for NB-IoT  p. 126

5.3.3.15  Failure to deliver NAS information in RRCConnectionSetupComplete message  p. 128

5.3.3.16  Integrity check failure from lower layers while T300 is running  p. 128

5.3.3.17  Inability to comply with RRCConnectionResume  p. 129

5.3.3.18  Early security reactivation  p. 129

5.3.3.19  Timing alignment validation for transmission using PUR  p. 129

5.3.3.20  Maintenance of PUR occasions  p. 129

5.3.3.21  UE actions upon indication of out-of-date GNSS position  p. 130

5.3.3.22  Void

5.3.3.23  UE actions upon detecting discontinuous coverage  p. 131

5.3.4.1  General  p. 131

5.3.4.2  Initiation  p. 132

5.3.4.3  Reception of the SecurityModeCommand by the UE  p. 132

5.3.5.1  General  p. 133

5.3.5.2  Initiation  p. 133

5.3.5.3  Reception of an RRCConnectionReconfiguration not including the mobilityControlInfo by the UE  p. 134

5.3.5.4  Reception of an RRCConnectionReconfiguration including the mobilityControlInfo by the UE (handover)  p. 137

5.3.5.5  Reconfiguration failure  p. 145

5.3.5.6  T304 expiry (handover failure)  p. 146

5.3.5.7  Void

5.3.5.7a  T307 expiry (SCG change failure)  p. 148

5.3.5.8  Radio Configuration involving full configuration option  p. 148

5.3.5.9  Conditional reconfiguration  p. 151

5.3.6.1  General  p. 154

5.3.6.2  Initiation  p. 154

5.3.6.3  Reception of the CounterCheck message by the UE  p. 154

5.3.7.1  General  p. 155

5.3.7.1a  Condition for re-establishing RRC Connection in NTN  p. 156

5.3.7.2  Initiation  p. 156

5.3.7.3  Actions following cell selection while T311 is running  p. 158

5.3.7.4  Actions related to transmission of RRCConnectionReestablishmentRequest message  p. 161

5.3.7.5  Reception of the RRCConnectionReestablishment by the UE  p. 162

5.3.7.6  T311 expiry  p. 165

5.3.7.7  T301 expiry or selected cell no longer suitable  p. 165

5.3.7.8  Reception of RRCConnectionReestablishmentReject by the UE  p. 166