Tech-invite 3GPPspace IETFspace

21 22 23 24 25 26 27 28 29 31 32 33 34 35 36 37 38 4‑5x

Content for TS 36.143 Word version: 18.0.0

1… 4… 10… A…

4.1 Measurement uncertainties and test requirements 4.2 Regional requirements 4.3 Selection of configurations for testing 4.4 Repeater configurations 4.5 Manufacturer's declarations of regional and optional requirements 4.6 Specified frequency range 4.7 Format and interpretation of tests 5.1 General 5.5 Operating bands 5.6 Channel bandwidth 5.7 Channel arrangement 6.1 Definition and applicability 6.2 Minimum requirement 6.3 Test purpose 6.4 Method of test 6.5 Test requirements 7.1 Definition and applicability 7.2 Minimum requirements 7.3 Test purpose 7.4 Method of test 7.5 Test requirement 8.1 Definition and applicability 8.2 Minimum requirements 8.3 Test purpose 8.4 Method of test 8.5 Test requirements 9.1 Operating band unwanted emissions 9.2 Spurious emissions
...

4 General test conditions and declarations p. 10

4.1 Measurement uncertainties and test requirements p. 11

4.1.1 General p. 11

4.1.2 Acceptable uncertainty of test system p. 11

4.1.2.1 Measurement of Repeater p. 12

4.1.2.2 Interpretation of measurement results p. 13

4.2 Regional requirements p. 14

4.3 Selection of configurations for testing p. 14

4.4 Repeater configurations p. 15

4.4.1 Power supply options p. 15

4.4.2 Combining of repeaters p. 15

4.5 Manufacturer's declarations of regional and optional requirements p. 15

4.5.1 Operating band and frequency range p. 15

4.5.2 Channel bandwidth p. 15

4.5.3 Repeater output power p. 15

4.5.4 Spurious emissions Category p. 15

4.5.5 Additional operating band unwanted emissions p. 16

4.5.6 Co-existence with other systems p. 16

4.5.7 Co-location with base stations p. 16

4.6 Specified frequency range p. 17

4.7 Format and interpretation of tests p. 17

5 Operating bands and channel arrangement p. 17

5.1 General p. 17

5.2 Void

5.3 Void

5.4 Void

5.5 Operating bands p. 18

5.6 Channel bandwidth p. 18

5.7 Channel arrangement p. 19

5.7.1 Channel spacing p. 19

5.7.2 Channel raster p. 19

5.7.3 Carrier frequency and EARFCN p. 19

6 Output power p. 20

6.1 Definition and applicability p. 20

6.2 Minimum requirement p. 21

6.3 Test purpose p. 21

6.4 Method of test p. 21

6.4.1 Initial conditions p. 21

6.4.2 Procedure p. 21

6.5 Test requirements p. 22

7 Frequency stability p. 22

7.1 Definition and applicability p. 22

7.2 Minimum requirements p. 22

7.3 Test purpose p. 22

7.4 Method of test p. 22

7.5 Test requirement p. 23

8 Out of band gain p. 23

8.1 Definition and applicability p. 23

8.2 Minimum requirements p. 23

8.3 Test purpose p. 23

8.4 Method of test p. 23

8.4.1 Initial conditions p. 23

8.4.2 Procedure p. 23

8.5 Test requirements p. 24

9 Unwanted emissions p. 24

9.1 Operating band unwanted emissions p. 24

9.1.1 Definition and applicability p. 24

9.1.2 Minimum requirements p. 24

9.1.3 Test purpose p. 25

9.1.4 Method of test p. 25

9.1.4.1 Initial conditions p. 25

9.1.4.2 Procedures p. 25

9.1.5 Test requirements p. 26

9.1.5.1 Operating band unwanted emission (Category A) p. 26

9.1.5.2 Operating band unwanted emissions (Category B) p. 28

9.1.5.2.1 Category B test requirements (Option 1) p. 28

9.1.5.2.2 Category B test requirements (Option 2) p. 31

9.1.5.3 Additional requirements p. 32

9.1.5.4 Protection of the BS receiver in the operating band p. 35

9.2 Spurious emissions p. 36

9.2.1 Definition and applicability p. 36

9.2.2 Minimum requirements p. 36

9.2.3 Test purpose p. 36

9.2.4 Method of test p. 36

9.2.4.1 Initial conditions p. 36

9.2.4.2 Procedures p. 36

9.2.5 Test requirements p. 37

9.2.5.1 Spurious emission (Category A) p. 37

9.2.5.2 Spurious emission (Category B) p. 37

9.2.5.3 Co-existence with other systems in the same geographical area p. 38

9.2.5.4 Co-location with base stations p. 44