Content for TS 36.116 Word version: 18.0.0
4 General
5 Operating bands and channel arrangement
6 Transmitter characteristics
7 Receiver characteristics
8 Access Performance requirement
9 Backhaul Performance requirement
A Propagation models for relay demodulation requirements
B Reference Measurement Channel
$ Change History
4 General p. 9
4.1 Relationship between minimum requirements and test requirements p. 9
4.2 Relay classes p. 9
4.3 Regional requirements p. 9
5 Operating bands and channel arrangement p. 10
5.1 General p. 10
5.2 Operating bands p. 10
5.3 Channel bandwidth p. 10
5.4 Channel arrangement p. 10
6 Transmitter characteristics p. 10
6.1 General p. 10
6.2 Output power p. 11
6.3 Output power dynamics p. 12
6.3.1 Minimum output power p. 12
6.3.2 ON/OFF time mask and transmitter OFF power p. 12
6.3.3 Power control p. 13
6.4 Transmitted signal quality p. 13
6.4.1 Frequency error p. 13
6.4.2 EVM p. 13
6.4.3 Time alignment error p. 13
6.4.4 DL RS power p. 13
6.5 Unwanted emissions p. 13
6.5.1 Transmitter spurious emissions p. 14
6.5.2 Adjacent Channel Leakage power Ratio (ACLR) p. 14
6.5.3 Operating band unwanted emissions p. 14
6.6 Transmitter intermodulation p. 16
7 Receiver characteristics p. 16
7.1 General p. 16
7.2 Reference sensitivity level p. 16
7.3 Dynamic range p. 17
7.4 In-channel selectivity p. 17
7.5 Adjacent Channel Selectivity (ACS) p. 17
7.5.1 Backhaul link Adjacent Channel Selectivity p. 17
7.5.2 Access link Adjacent Channel Selectivity p. 18
7.6 Blocking characteristics p. 18
7.6.1 Backhaul link blocking characteristics p. 18
7.6.2 Access link blocking characteristics p. 19
7.6.3 Blocking requirements for co-location p. 19
7.7 Receiver spurious emissions p. 20
7.8 Receiver intermodulation p. 20
8 Access Performance requirement p. 21
8.1 General p. 21
8.2 Performance requirements for PUSCH p. 21
8.2.1 Requirements in multipath fading propagation conditions p. 21
8.2.2 Requirements for UL timing adjustment p. 21
8.2.3 Requirements for HARQ-ACK multiplexed on PUSCH p. 21
8.3 Performance requirements for PUCCH p. 21
8.3.1 DTX to ACK performance p. 21
8.3.2 ACK missed detection requirements for single user PUCCH format 1a p. 21
8.3.3 CQI missed detection requirements for PUCCH format 2 p. 21
8.3.4 ACK missed detection requirements for multi user PUCCH format 1a p. 22
8.4 Performance requirements for PRACH p. 22
9 Backhaul Performance requirement p. 22
9.1 General p. 22
9.2 Demodulation of PDSCH (Cell-Specific Reference Symbols) p. 22
9.3 Demodulation of PDSCH (User-Specific Reference Symbols) p. 22
9.4 Demodulation of PDCCH/PCFICH p. 22
9.5 Demodulation of PHICH p. 22
9.6 Demodulation of PBCH p. 23
9.7 Sustained downlink data rate provided by lower layers p. 23
9.8 Demodulation of R-PDCCH p. 23
9.8.1 R-PDCCH format without cross-interleaving p. 23
9.8.1.1 FDD p. 23
9.8.1.2 TDD p. 25
A Propagation models for relay demodulation requirements p. 27
A.1 Propagation models for backhaul link p. 27
A.2 Multipath propagation fading conditions for access link p. 29
B Reference Measurement Channel p. 31
B.1 Reference measurement channels for R-PDCCH performance requirements p. 31
B.1.1 R-PDCCH format without cross-interleaving p. 31
B.1.1.1 FDD p. 31
B.1.1.2 TDD p. 31
B.2 OCNG patterns for R-PDCCH performance requirements p. 31
$ Change History p. 34
