Content for TS 36.102 Word version: 18.5.0
3 Definitions of terms, symbols and abbreviations
4 General
5 Operating bands and channel arrangement
6 Transmitter characteristics
7 Receiver characteristics
8 Performance requirement
A Measurement channels
B Downlink physical channels
C Environment conditions
D Propagation conditions
$ Change history
3 Definitions of terms, symbols and abbreviations p. 10
4 General p. 12
4.1 Relationship between minimum requirements and test requirements p. 12
4.2 Applicability of minimum requirements p. 12
4.3 Specification Suffix Information p. 12
5 Operating bands and channel arrangement p. 13
5.1 General p. 13
5.2 Operating bands p. 13
5.2A Operating bands for UE category M1 p. 13
5.2B Operating bands for category NB1 and NB2 p. 13
5.3 Channel bandwidth p. 14
5.3A Channel bandwidth for category M1 p. 14
5.3B Channel bandwidth for category NB1 and NB2 p. 14
5.4 Channel arrangement p. 15
5.4A Channel arrangement for category M1 p. 15
5.4A.1 Channel spacing p. 15
5.4A.2 Channel raster, carrier frequency and EARFCN p. 16
5.4A.3 TX-RX frequency separation p. 16
5.4B Channel arrangement for category NB1 and NB2 p. 17
6 Transmitter characteristics p. 17
6.1 General p. 17
6.2 Transmit power p. 17
6.2A Transmit power for category M1 p. 18
6.2A.1 UE maximum output power for category M1 p. 18
6.2A.2 UE maximum output power reduction for category M1 p. 18
6.2A.3 UE additional maximum output power reduction for category M1 UE p. 19
6.2A.4 Configured transmitted Power for category M1 p. 19
6.2B Transmit power for category NB1 and NB2 p. 19
6.2B.1 UE maximum output power for category NB1 and NB2 p. 19
6.2B.2 UE maximum output power reduction for category NB1 and NB2 p. 20
6.2B.3 UE additional maximum output power reduction for category NB1 and NB2 UE p. 20
6.2B.4 Configured transmitted Power for category NB1 and NB2 p. 20
6.3 Output power dynamics p. 21
6.3A Output power dynamics for category M1 p. 21
6.3A.1 UE Minimum output power for category M1 p. 21
6.3A.2 Transmit OFF power for category M1 p. 21
6.3A.3 ON/OFF time mask for category M1 p. 21
6.3A.4 Power control for category M1 p. 21
6.3B Output power dynamics for category NB1 and NB2 p. 21
6.3B.1 UE Minimum output power for category NB1 and NB2 p. 21
6.3B.2 Transmit OFF power for category NB1 and NB2 p. 21
6.3B.3 ON/OFF time mask for category NB1 and NB2 p. 22
6.3B.4 Power Control for category NB1 and NB2 p. 22
6.4 Transmit signal quality p. 22
6.4A Transmit signal quality for category M1 p. 22
6.4A.1 Frequency error for UE category M1 p. 22
6.4A.2 Transmit modulation quality for category M1 p. 22
6.4B Transmit signal quality for category NB1 and NB2 p. 23
6.4B.1 Frequency error for UE category NB1 and NB2 p. 23
6.4B.2 Transmit modulation quality for Category NB1 and NB2 p. 23
6.5 Output RF spectrum emissions p. 23
6.5A Output RF spectrum emissions for category M1 p. 24
6.5A.1 General p. 24
6.5A.2 Occupied bandwidth for category M1 p. 24
6.5A.3 Out of band emission for category M1 p. 24
6.5A.3.1 General p. 24
6.5A.3.2 Spectrum emission mask p. 24
6.5A.3.3 Additional Spectrum Emission Mask for category M1 p. 25
6.5A.3.4 Adjacent Channel Leakage Ratio for category M1 p. 25
6.5A.4 Spurious emission for category M1 p. 25
6.5A.4.1 General p. 25
6.5A.4.2 Minimum requirements p. 25
6.5A.4.3 Spurious emission band UE co-existence p. 26
6.5A.4.4 Additional spurious emissions p. 27
6.5A.4.4.1 General p. 27
6.5A.4.4.2 Minimum requirement (network signalled value "NS_02N") p. 27
6.5A.4.4.3 Minimum requirement (network signalled value "NS_24") p. 28
6.5A.4.4.4 Minimum requirement (network signalled value "NS_03N") p. 28
6.5A.4.4.5 Minimum requirement (network signalled value "NS_04N") p. 29
6.5A.4.4.6 Minimum requirement (network signalled value "NS_05N") p. 29
6.5B Output RF spectrum emissions for category NB1 and NB2 p. 30
6.5B.1 General p. 30
6.5B.2 Occupied bandwidth for category NB1 and NB2 p. 30
6.5B.3 Out of band emission for category NB1 and NB2 p. 30
6.5B.3.1 General p. 30
6.5B.3.2 Spectrum emission mask p. 30
6.5B.3.3 Additional Spectrum Emission Mask for category NB1 and NB2 p. 30
6.5B.3.4 Adjacent Channel Leakage Ratio for category NB1 and NB2 p. 30
6.5B.4 Spurious emission for category NB1 and NB2 p. 31
6.5B.4.1 General p. 31
6.5B.4.2 Minimum requirements p. 31
6.5B.4.3 Spurious emission band UE co-existence p. 31
6.5B.4.4 Additional spurious emissions p. 31
6.5B.4.4.1 General p. 31
6.5B.4.4.2 Minimum requirement (network signalled value "NS_02N") p. 32
6.5B.4.4.3 Minimum requirement (network signalled value "NS_24") p. 32
6.5B.4.4.4 Minimum requirement (network signalled value "NS_03N") p. 32
6.5B.4.4.5 Minimum requirement (network signalled value "NS_04N") p. 33
6.5B.4.4.6 Minimum requirement (network signalled value "NS_05N") p. 33
6.6 Transmit intermodulation p. 33
6.6A Transmit intermodulation for category M1 p. 33
6.6B Transmit intermodulation for category NB1 and NB2 p. 33
7 Receiver characteristics p. 33
7.1 General p. 33
7.2 Diversity characteristics p. 33
7.3 Reference sensitivity power level p. 34
7.3A Reference sensitivity power level for UE category M1 p. 34
7.3B Reference sensitivity power level for UE category NB1 and NB2 p. 35
7.4 Maximum input level p. 35
7.4A Maximum input level for category M1 p. 35
7.4B Maximum input level for category NB1 and NB2 p. 35
7.5 Adjacent Channel Selectivity (ACS) p. 36
7.5A Adjacent Channel Selectivity for category M1 p. 36
7.5B Adjacent Channel Selectivity for category NB1 and NB2 p. 37
7.6 Blocking characteristics p. 37
7.6A Blocking characteristics for category M1 p. 38
7.6A.1 General p. 38
7.6A.2 In-band blocking requirements for category M1 p. 38
7.6A.3 Out-of-band blocking requirements for category M1 p. 39
7.6A.4 Narrow band blocking for category M1 p. 39
7.6B Blocking characteristics for category NB1 and NB2 p. 40
7.6B.1 General p. 40
7.6B.2 In-band blocking requirements for category NB1 and NB2 p. 40
7.6B.3 Out-of-band blocking requirements for category NB1 and NB2 p. 40
7.6B.4 Narrow band blocking for category NB1 and NB2 p. 41
7.7 Spurious response p. 41
7.7A Spurious response for category M1 p. 41
7.7B Spurious response for category NB1 and NB2 p. 42
7.8 Intermodulation characteristics p. 42
7.8A Intermodulation characteristics for category M1 p. 42
7.8B Intermodulation characteristics for category NB1 and NB2 p. 42
7.9 Spurious emissions p. 43
8 Performance requirement p. 43
8.1 General p. 43
8.1.1 Receiver antenna capability p. 43
8.1.2 Applicability of requirements p. 43
8.1.2.1 Applicability of requirements for different channel bandwidths p. 43
8.2.1.2 Applicability of requirements for optional UE features p. 43
8.1.3 UE category and UE DL category p. 44
8.2 Demodulation performance requirements for UE category M1 p. 44
8.3 Demodulation performance requirements for UE category NB1 and NB2 p. 47
A (Normative) Measurement channels p. 49
A.1 DL reference measurement channels p. 49
A.1.1 Reference measurement channels for NPDSCH performance requirements p. 49
A.1.1.1 Standalone p. 49
A.1.2 Reference measurement channels for PDSCH performance requirements p. 50
A.2 OFDMA Channel Noise Generator (OCNG) p. 50
A.3 Testing related to Satellite Access p. 52
A.3.1 General p. 52
A.3.2 Test condition for transmitter characteristics p. 52
A.3.3 Test condition for receiver characteristics p. 52
A.3.4 Test condition for performance requirements p. 53
A.4 UL reference measurement channels p. 53
A.4.1 General p. 53
A.4.1.1 Applicability and common parameters p. 53
A.4.1.2 Determination of payload size p. 53
A.4.1.3 Overview of UL reference measurement channels p. 54
A.4.2 Reference measurement channels for FDD p. 55
A.4.2.1 Full RB allocation p. 55
A.4.2.1.1 QPSK p. 55
A.4.2.1.2 16-QAM p. 56
A.4.2.2 Partial RB allocation p. 56
A.4.2.2.1 QPSK p. 56
A.4.2.2.2 16-QAM p. 57
A.4.2.3 subPRB allocation p. 57
A.4.3 Reference measurement channels for category NB1 p. 58
B (Normative) Downlink physical channels p. 59
C (Normative) Environment conditions p. 62
C.1 General p. 62
C.2 Environmental p. 62
D (Normative) Propagation conditions p. 64
$ Change history p. 66
