Content for  TS 25.433  Word version:  18.0.0

9.2.2.a2  ACK-NACK Repetition Factor |R5|  p. 633

9.2.2.b2  ACK Power Offset |R5|  p. 633

9.2.2.A  Active Pattern Sequence Information  p. 633

9.2.2.B  Adjustment Period  p. 634

9.2.2.C  Adjustment Ratio  p. 634

9.2.2.D  AICH Power  p. 634

9.2.2.1  AICH Transmission Timing  p. 634

9.2.2.1A  AP Preamble Signature  p. 634

9.2.2.1B  AP Sub Channel Number  p. 634

9.2.2.1Ba  Best Cell Portions |R5|  p. 635

9.2.2.1Bb  Bundling Mode Indicator |R6|  p. 635

9.2.2.1C  CD Sub Channel Numbers  p. 635

9.2.2.1Ca  Cell Portion ID |R5|  p. 635

9.2.2.1D  Channel Assignment Indication  p. 635

9.2.2.2  Chip Offset  p. 635

9.2.2.2A  Closed Loop Timing Adjustment Mode  p. 635

9.2.2.3  Common Channels Capacity Consumption Law  p. 636

9.2.2.3A  Compressed Mode Deactivation Flag  p. 636

9.2.2.4  Compressed Mode Method  p. 636

9.2.2.4A  CPCH Allowed Total Rate  p. 636

9.2.2.4B  CPCH Scrambling Code Number  p. 636

9.2.2.4C  CPCH UL DPCCH Slot Format  p. 636

9.2.2.4Ca  CQI Power Offset |R5|  p. 636

9.2.2.4Cb  CQI Repetition Factor |R5|  p. 636

9.2.2.4D  DCH FDD Information  p. 637

9.2.2.4E  DCHs FDD To Modify  p. 637

9.2.2.4F  DCH Indicator For E-DCH-HSDPA Operation |R6|  p. 638

9.2.2.4G  Transport Bearer Not Requested Indicator |R7|  p. 638

9.2.2.4H  Transport Bearer Not Setup Indicator |R7|  p. 638

9.2.2.5  D-Field Length  p. 638

9.2.2.6  Dedicated Channels Capacity Consumption Law  p. 638

9.2.2.7  Diversity Control Field  p. 638

9.2.2.8  Diversity Indication  p. 638

9.2.2.9  Diversity Mode  p. 639

9.2.2.10  DL DPCH Slot Format  p. 639

9.2.2.10A  DL DPCH Timing Adjustment |R5|  p. 639

9.2.2.11  DL frame type  p. 639

9.2.2.12  DL or Global Capacity Credit  p. 639

9.2.2.12A  DL_power_averaging_window_size  p. 639

9.2.2.12B  DL Power Balancing Information |R5|  p. 639

9.2.2.12C  DL Power Balancing Activation Indicator |R5|  p. 640

9.2.2.12D  DL Power Balancing Updated Indicator |R5|  p. 640

9.2.2.13  DL Scrambling Code  p. 640

9.2.2.13A  DL TPC Pattern 01 Count  p. 641

9.2.2.13B  DSCH FDD Information  p. 641

9.2.2.13C  DPC Mode |R4|  p. 641

9.2.2.13D  DSCH FDD Common Information |R4|  p. 641

9.2.2.13Da2  E-DCH FDD Information |R6|  p. 641

9.2.2.13DA  E-DCH FDD Update Information |R6|  p. 642

9.2.2.13Db  E-DCH FDD Information Response |R6|  p. 643

9.2.2.13Dc  E-DCH FDD DL Control Channel Information |R6|  p. 643

9.2.2.13De  E-DCH RL Indication |R6|  p. 645

9.2.2.13Df  E-DCH FDD Information to Modify |R6|  p. 645

9.2.2.13Dh  E-DCH Transport Format Combination Set Information (E-TFCS Information) |R6|  p. 648

9.2.2.13Di  E-TTI |R6|  p. 649

9.2.2.13Dj  E-DPCCH Power Offset |R6|  p. 649

9.2.2.13Dk  E-DCH HARQ Power Offset FDD |R6|  p. 649

9.2.2.13Dl  E-DCH MAC-d Flow Multiplexing List |R6|  p. 649

9.2.2.13Dm  Maximum Number of Bits per MAC-e PDU for Non-scheduled Transmission |R6|  p. 649

9.2.2.13Dn  HARQ Process Allocation For 2ms TTI |R6|  p. 649

9.2.2.13Dp  Reference E-TFCI Power Offset |R6|  p. 650

9.2.2.13Dq  Extended Reference E-TFCI Power Offset |R7|  p. 650

9.2.2.13Dr  Extended Maximum Number of Bits per MAC-e PDU for Non-scheduled Transmission |R7|  p. 650

9.2.2.13E  Enhanced DSCH PC |R4|  p. 650

9.2.2.13F  Enhanced DSCH PC Counter |R4|  p. 650

9.2.2.13G  Enhanced DSCH PC Indicator |R4|  p. 651

9.2.2.13H  Enhanced DSCH PC Wnd |R4|  p. 651

9.2.2.13I  Enhanced DSCH Power Offset |R4|  p. 651

9.2.2.13Ia  E- RGCH/E-HICH FDD Code Information |R6|  p. 651

9.2.2.13Ib  E- AGCH FDD Code Information |R6|  p. 651

9.2.2.13Ic  E-RGCH Release Indicator |R6|  p. 651

9.2.2.13Id  E-AGCH Power Offset |R6|  p. 652

9.2.2.13Ie  E-RGCH Power Offset |R6|  p. 652

9.2.2.13If  E-HICH Power Offset |R6|  p. 652

9.2.2.13Ig  E-RGCH 2-Index-Step Threshold |R6|  p. 652

9.2.2.13Ih  E-RGCH 3-Index-Step Threshold |R6|  p. 652

9.2.2.13J  E-DCH Capability |R6|  p. 653

9.2.2.13Ja  E-DCH Capacity Consumption Law |R6|  p. 653

9.2.2.13K  E-DCH Logical Channel Information |R6|  p. 654

9.2.2.13L  E-DCH Logical Channel To Modify |R6|  p. 654

9.2.2.13M  E-DCH MAC-d Flows Information |R6|  p. 654

9.2.2.13N  E-DCH MAC-d Flows To Delete |R6|  p. 656

9.2.2.13O  E-DCH MAC-d Flow ID |R6|  p. 656

9.2.2.13P  E-RNTI |R6|  p. 656

9.2.2.13Q  E-DCH DDI Value |R6|  p. 656

9.2.2.13R  E-DCH Provided Bit Rate Value |R6|  p. 656

9.2.2.13S  E-DCH Provided Bit Rate Value Information |R6|  p. 656

9.2.2.13T  E-DCH Maximum Bitrate |R6|  p. 656

9.2.2.13U  E-DCH Processing Overload Level |R6|  p. 656

9.2.2.13V  E-DCH TTI2ms Capability |R6|  p. 656

9.2.2.13W  E-DCH SF Capability |R6|  p. 657

9.2.2.13X  E-DCH HARQ Combining Capability |R6|  p. 657

9.2.2.13Y  E-DCH Reference Power Offset |R6|  p. 657

9.2.2.13Z  E-DCH Power Offset for Scheduling Info |R7|  p. 657

9.2.2.14  FDD DL Channelisation Code Number  p. 657

9.2.2.14A  FDD DL Code Information  p. 658

9.2.2.14B  FDD S-CCPCH Frame Offset |R6|  p. 658

9.2.2.15  FDD SCCPCH Offset  p. 658

9.2.2.16  FDD TPC DL Step Size  p. 658

9.2.2.16a2  F-DPCH Capability |R6|  p. 659

9.2.2.16A  First RLS Indicator  p. 659

9.2.2.17  Gap Period  p. 659

9.2.2.18  Gap Position Mode  p. 659

9.2.2.18a2  HARQ Preamble Mode |R6|  p. 659

9.2.2.18b2  HARQ Preamble Mode Activation Indicator |R6|  p. 659

9.2.2.18ba  HARQ Info for E-DCH |R6|  p. 659

9.2.2.18c2  Logical channel ID |R6|  p. 660

9.2.2.18A  Limited Power Increase  p. 660

9.2.2.18B  Inner Loop DL PC Status  p. 660

9.2.2.18C  IPDL FDD Parameters |R4|  p. 660

9.2.2.18Ca  HS-DSCH configured indicator |R6|  p. 660

9.2.2.18D  HS-DSCH FDD Information |R5|  p. 661

9.2.2.18Da  HS-DSCH FDD Secondary Serving Information |R8|  p. 663

9.2.2.18E  HS-DSCH FDD Information Response |R5|  p. 665

9.2.2.18EA  HS-DSCH FDD Secondary Serving Information Response |R8|  p. 665

9.2.2.18EB  HS-DSCH FDD Secondary Serving Information To Modify |R8|  p. 666

9.2.2.18EC  HS-DSCH FDD Secondary Serving Information To Modify Unsynchronised |R8|  p. 668

9.2.2.18Ea2  HS-DSCH FDD Update Information |R5|  p. 669

9.2.2.18Eaa  HS-DSCH FDD Secondary Serving Update Information |R8|  p. 670

9.2.2.18Eb2  HS-DSCH Serving Cell Change Information |R6|  p. 670

9.2.2.18Ec2  HS-DSCH Serving Cell Change Information Response |R6|  p. 671

9.2.2.18Eca  HS-DSCH Secondary Serving Cell Change Information Response |R8|  p. 671

9.2.2.18Ed  E-DCH Serving Cell Change Information Response |R6|  p. 671

9.2.2.18Ee  HS-DSCH TB Size Table Indicator |R7|  p. 672

9.2.2.18F  HS-PDSCH FDD Code Information |R5|  p. 672

9.2.2.18G  HS-SCCH FDD Code Information |R5|  p. 672

9.2.2.18H  HS-SCCH ID |R5|  p. 673

9.2.2.18I  HS-SCCH Power Offset |R5|  p. 673

9.2.2.18K  Initial DL DPCH Timing Adjustment Allowed |R6|  p. 673

9.2.2.19  Max Adjustment Period  p. 673

9.2.2.20  Max Adjustment Step  p. 673

9.2.2.20A  Max Number Of PCPCHs  p. 674

9.2.2.20B  Max Number Of UL E-DPDCHs |R6|  p. 674

9.2.2.20C  Maximum Set of E-DPDCHs |R6|  p. 674

9.2.2.20D  Maximum Number Of Retransmissions For E-DCH |R6|  p. 674

9.2.2.20E  MAC-es Guaranteed Bit Rate |R6|  p. 674

9.2.2.20F  MAC-e Reset Indicator |R6|  p. 674

9.2.2.21  Maximum Number Of UL DPDCHs  p. 674

9.2.2.21a2  Maximum Target Received Total Wide Band Power |R6|  p. 674

9.2.2.21b2  Target Non-serving E-DCH to Total E-DCH Power Ratio |R6|  p. 675

9.2.2.21A  Maximum PDSCH Power |R5|  p. 675

9.2.2.21B  CQI Feedback Cycle k |R5|  p. 675

9.2.2.21C  Measurement Power Offset |R5|  p. 675

9.2.2.21D  MICH Mode |R6|  p. 675

9.2.2.22  Minimum UL Channelisation Code Length  p. 675

9.2.2.22a  Min UL Channelisation Code Length For E-DCH FDD |R6|  p. 676

9.2.2.23  Multiplexing Position  p. 676

9.2.2.23a2  NACK Power Offset |R5|  p. 676

9.2.2.23A  N_EOT  p. 676

9.2.2.23B  NF_max  p. 676

9.2.2.23C  N_Start_Message  p. 676

9.2.2.23D  Number Of Reported Cell Portions |R5|  p. 676

9.2.2.24  Pattern Duration (PD)  p. 676

9.2.2.24A  PCP Length  p. 676

9.2.2.25  PDSCH Code Mapping  p. 676

9.2.2.26  PICH Mode  p. 677

9.2.2.27  Power Adjustment Type  p. 677

9.2.2.28  Power Control Mode  p. 677

9.2.2.29  Power Offset  p. 677

9.2.2.29A  Power_Raise_Limit  p. 677

9.2.2.30  Power Resume Mode  p. 677

9.2.2.31  Preamble Signatures  p. 678

9.2.2.32  Preamble Threshold  p. 678

9.2.2.33  Primary CPICH Power  p. 678

9.2.2.33A  Primary CPICH Usage For Channel Estimation |R5|  p. 678

9.2.2.34  Primary Scrambling Code  p. 678

9.2.2.35  Propagation Delay  p. 679

9.2.2.35A  Extended Propagation Delay |R7|  p. 679

9.2.2.36  QE-Selector  p. 679

9.2.2.36A  Qth Parameter |R5|  p. 679

9.2.2.37  RACH Slot Format  p. 679

9.2.2.38  RACH Sub Channel Numbers  p. 680

9.2.2.39  RL Set ID  p. 680

9.2.2.39a2  RL Specific E-DCH Information |R6|  p. 680

9.2.2.39A  Received Total Wide Band Power  p. 680

9.2.2.39B  Reference Received Total Wide Band Power |R6|  p. 681

9.2.2.39C  Reference Received Total Wide Band Power Reporting |R7|  p. 681

9.2.2.39D  Reference Received Total Wide Band Power Support Indicator |R7|  p. 681

9.2.2.40  S-Field Length  p. 681

9.2.2.40A  Scheduling Information |R6|  p. 681

9.2.2.41  Scrambling Code Change  p. 681

9.2.2.42  Scrambling Code Number  p. 682

9.2.2.43  Secondary CCPCH Slot Format  p. 682

9.2.2.43A  Secondary CPICH Information Change |R5|  p. 682

9.2.2.44  SSDT Cell Identity  p. 682

9.2.2.44A  SSDT Cell Identity For EDSCHPC |R4|  p. 682

9.2.2.45  SSDT Cell ID Length  p. 682

9.2.2.46  SSDT Support Indicator  p. 682

9.2.2.47  SSDT Indication  p. 682

9.2.2.48  STTD Indicator  p. 683

9.2.2.48A  Synchronisation Indicator |R6|  p. 683

9.2.2.48B  Serving E-DCH RL |R6|  p. 683

9.2.2.49  T Cell  p. 683

9.2.2.49A  TFCI2 Bearer Information Response  p. 683

9.2.2.50  TFCI Signalling Mode  p. 683

9.2.2.51  TGD  p. 684

9.2.2.52  TGL  p. 684

9.2.2.53  Transmit Diversity Indicator  p. 684

9.2.2.53A  Transmission Gap Pattern Sequence Information  p. 684

9.2.2.53B  Transmission Gap Pattern Sequence Code Information  p. 686

9.2.2.54  UL/DL compressed mode selection  p. 686

9.2.2.55  UL delta SIR  p. 687

9.2.2.56  UL delta SIR after  p. 687

9.2.2.57  UL DPCCH Slot Format  p. 687

9.2.2.58  UL SIR  p. 687

9.2.2.59  UL Scrambling Code  p. 687

9.2.2.60  UL Capacity Credit  p. 687

9.2.2.61  UL DPDCH Indicator For E-DCH Operation |R6|  p. 687

9.2.2.62  Fast Reconfiguration Mode |R7|  p. 687

9.2.2.63  Fast Reconfiguration Permission |R7|  p. 688

9.2.2.64  Continuous Packet Connectivity DTX-DRX Capability |R7|  p. 688

9.2.2.65  Continuous Packet Connectivity HS-SCCH less Capability |R7|  p. 688

9.2.2.66  Continuous Packet Connectivity DTX-DRX Information |R7|  p. 688

9.2.2.67  Continuous Packet Connectivity DTX-DRX Information To Modify |R7|  p. 690

9.2.2.68  Continuous Packet Connectivity HS-SCCH less Information |R7|  p. 692

9.2.2.69  Continuous Packet Connectivity HS-SCCH less Information Response |R7|  p. 692

9.2.2.69A  Continuous Packet Connectivity HS-SCCH less Deactivate Indicator |R7|  p. 693

9.2.2.70  MIMO Capability |R7|  p. 693

9.2.2.71  MIMO Activation Indicator |R7|  p. 693

9.2.2.72  MIMO Mode Indicator |R7|  p. 693

9.2.2.73  MIMO Pilot Configuration |R7|  p. 693

9.2.2.74  SixtyfourQAM DL Capability |R7|  p. 693

9.2.2.74A  Sixtyfour QAM Usage Allowed Indicator |R7|  p. 693

9.2.2.74B  SixtyfourQAM DL Usage Indicator |R7|  p. 694

9.2.2.75  HS-DSCH Common System Information |R7|  p. 694

9.2.2.76  HS-DSCH Paging System Information |R7|  p. 696

9.2.2.77  HS-DSCH Common System Information Response |R7|  p. 696

9.2.2.78  HS-DSCH Paging System Information Response |R7|  p. 697

9.2.2.79  Common MAC Flow ID |R7|  p. 697

9.2.2.80  Paging MAC Flow ID |R7|  p. 697

9.2.2.81  HSDPA Associated PICH Information |R7|  p. 698

9.2.2.82  FACH Measurement Occasion Cycle Length Coefficient |R7|  p. 698

9.2.2.83  Priority Queue Information for Enhanced FACH/PCH |R7|  p. 698

9.2.2.84  RACH Measurement Result |R7|  p. 698

9.2.2.85  BCCH Specific HS-DSCH RNTI Information |R7|  p. 698

9.2.2.86  Enhanced FACH Capability |R7|  p. 698

9.2.2.87  Enhanced PCH Capability |R7|  p. 698

9.2.2.88  SixteenQAM UL Capability |R7|  p. 699

9.2.2.88A  SixteenQAM UL Operation Indicator |R7|  p. 699

9.2.2.88B  E-TFCI Boost Information |R7|  p. 699

9.2.2.88C  SixtyfourQAM UL Operation Indicator |R11|  p. 699

9.2.2.89  SixteenQAM UL Information |R7|  p. 699

9.2.2.90  SixteenQAM UL Information To Modify |R7|  p. 699

9.2.2.91  Modulation Power Offset |R7|  p. 699

9.2.2.92  Extended Secondary CCPCH Slot Format |R7|  p. 700

9.2.2.93  F-DPCH Slot Format |R7|  p. 700

9.2.2.94  F-DPCH Slot Format Capability |R7|  p. 700

9.2.2.95  Max UE DTX Cycle |R7|  p. 700

9.2.2.96  MIMO N/M Ratio |R7|  p. 701

9.2.2.97  Common MAC Flows To Delete |R7|  p. 701

9.2.2.98  Paging MAC Flows To Delete |R7|  p. 701

9.2.2.99  MAC-ehs Reset Timer |R7|  p. 701

9.2.2.100  E-AGCH Table Choice |R7|  p. 701

9.2.2.101  Common E-DCH Capability |R7|  p. 702

9.2.2.102  E-AI Capability |R7|  p. 702

9.2.2.103  Common E-DCH System Information |R7|  p. 702

9.2.2.104  Common E-DCH System Information Response |R7|  p. 707

9.2.2.105  Common E-DCH MAC-d Flow Specific Information |R7|  p. 708

9.2.2.106  Maximum TB Size |R7|  p. 709

9.2.2.107  Enhanced UE DRX Capability |R8|  p. 709

9.2.2.108  Enhanced UE DRX Information |R8|  p. 710

9.2.2.109  E-DPCCH Power Boosting Capability |R8|  p. 710

9.2.2.110  SixtyfourQAM DL and MIMO Combined Capability |R8|  p. 710

9.2.2.111  HS-DSCH Preconfiguration Info |R8|  p. 710

9.2.2.112  HS-DSCH Preconfiguration Setup |R8|  p. 712

9.2.2.113  Multi Cell Capability Info |R8|  p. 715

9.2.2.114  Minimum Reduced E-DPDCH Gain Factor |R8|  p. 715

9.2.2.115  IMB Parameters |R8|  p. 716

9.2.2.116  Common E-DCH HS-DPCCH Capability |R8|  p. 716

9.2.2.117  UE Support Indicator Extension |R8|  p. 716

9.2.2.118  MIMO Power Offset For S-CPICH Capability |R8|  p. 717

9.2.2.119  Power Offset For Secondary CPICH for MIMO |R8|  p. 717

9.2.2.120  MIMO Pilot Configuration Extension |R8|  p. 718

9.2.2.121  TX Diversity on DL Control Channels by MIMO UE Capability |R8|  p. 718

9.2.2.122  Single Stream MIMO Capability |R8|  p. 718

9.2.2.123  Single Stream MIMO Activation Indicator |R8|  p. 718

9.2.2.124  Single Stream MIMO Mode Indicator |R8|  p. 718

9.2.2.125  Dual Band Capability Info |R8|  p. 718

9.2.2.126  Void

9.2.2.127  HS-DSCH MAC-ehs Format |R9|  p. 719

9.2.2.128  Activation Information |R9|  p. 719

9.2.2.129  Cell Capability Container |R9|  p. 720

9.2.2.130  Multicell E-DCH Transport Bearer Mode |R9|  p. 724

9.2.2.131  Additional E-DCH FDD Setup Information |R9|  p. 725

9.2.2.132  Additional E-DCH RL Specific Information To Setup |R9|  p. 725

9.2.2.133  Additional E-DCH RL Specific Information To Add |R9|  p. 726

9.2.2.134  Additional E-DCH RL Specific Information To Modify |R9|  p. 726

9.2.2.135  Additional E-DCH FDD Information Response |R9|  p. 727

9.2.2.136  Additional E-DCH Configuration Change Information |R9|  p. 728

9.2.2.137  Additional E-DCH FDD Information |R9|  p. 729

9.2.2.138  Additional E-DCH FDD Update Information |R9|  p. 730

9.2.2.139  E-RNTI List |R9|  p. 730

9.2.2.140  Multicell E-DCH Information |R9|  p. 730

9.2.2.141  Additional Modified E-DCH FDD Information Response |R9|  p. 731

9.2.2.142  Multicell E-DCH RL Specific Information |R9|  p. 731

9.2.2.143  Precoding Weight Set Restriction |R9|  p. 731

9.2.2.144  Non-Serving RL Preconfiguration Setup |R9|  p. 732

9.2.2.145  Non-Serving RL Preconfiguration Info |R9|  p. 732

9.2.2.146  Void

9.2.2.147  Usefulness of Battery Optimization |R10|  p. 734

9.2.2.148  Common HS-DSCH RNTI List |R10|  p. 734

9.2.2.149  Puncturing Handling in First Rate Matching Stage |R10|  p. 734

9.2.2.150  Support of Dynamic DTXDRX Related HS-SCCH Order |R10|  p. 734

9.2.2.151  UL CLTD Information Reconf |R11|  p. 734

9.2.2.152  UL CLTD Information |R11|  p. 735

9.2.2.153  UL CLTD Information To Modify |R11|  p. 735

9.2.2.154  UL CLTD Information Removal |R11|  p. 735

9.2.2.155  UL CLTD State Update Information |R11|  p. 736

9.2.2.156  F-TPICH Slot Format |R11|  p. 736

9.2.2.157  F-TPICH Offset |R11|  p. 736

9.2.2.158  S-DPCCH Power Offset Information |R11|  p. 736

9.2.2.159  UL CLTD Activation Information |R11|  p. 736

9.2.2.160  F-TPICH Information |R11|  p. 737

9.2.2.161  F-TPICH Information To Modify |R11|  p. 737

9.2.2.162  F-TPICH Information Removal |R11|  p. 737

9.2.2.163  F-TPICH Information Reconf |R11|  p. 737

9.2.2.164  MIMO with four transmit antennas Activation Indicator |R11|  p. 738

9.2.2.165  MIMO with four transmit antennas Pilot Configuration |R11|  p. 738

9.2.2.166  MIMO with four transmit antennas Mode Indicator |R11|  p. 738

9.2.2.167  Dual Stream MIMO with four transmit antennas Activation Indicator |R11|  p. 738

9.2.2.168  Dual Stream MIMO with four transmit antennas Mode Indicator |R11|  p. 738

9.2.2.169  Multiflow Reconfiguration |R11|  p. 739

9.2.2.170  Multiflow Information |R11|  p. 739

9.2.2.171  Multiflow Information To Modify |R11|  p. 739

9.2.2.172  Multiflow Stop |R11|  p. 740

9.2.2.173  Multiflow Role |R11|  p. 740

9.2.2.174  Multiflow MIMO |R11|  p. 740

9.2.2.175  Multiflow Timing |R11|  p. 740

9.2.2.176  UL MIMO Reconfiguration |R11|  p. 741

9.2.2.177  UL MIMO Information |R11|  p. 741

9.2.2.178  UL MIMO Information To Modify |R11|  p. 742

9.2.2.179  UL MIMO Removal |R11|  p. 742

9.2.2.180  UL MIMO DL Control Channel Information |R11|  p. 742

9.2.2.181  E-ROCH Power Offset |R11|  p. 742

9.2.2.182  S-E-DPCCH Power Offset |R11|  p. 743

9.2.2.183  Inter-stream Interference Compensation Index |R11|  p. 743

9.2.2.184  Secondary Transport Block E-HICH Release Indicator |R11|  p. 743

9.2.2.185  Further Enhanced UE DRX Information |R11|  p. 743

9.2.2.186  Common E-DCH Preamble Control Information extension list |R11|  p. 744

9.2.2.187  Common E-DCH Preamble Control Information extension |R11|  p. 745

9.2.2.188  Common E-DCH AICH Information |R11|  p. 745

9.2.2.189  Common E-RGCH Info |R11|  p. 745

9.2.2.190  Common E-DCH HS-DPCCH Information for Concurrent TTI |R11|  p. 745

9.2.2.191  Common E-DCH system info parameters for Concurrent TTI |R11|  p. 746

9.2.2.192  Precoder weight set restriction |R11|  p. 746

9.2.2.193  Multiflow Repetition Factors |R11|  p. 746

9.2.2.194  E-DCH Decoupling Indication |R12|  p. 747

9.2.2.195  DCH Enhancements Information Reconf |R12|  p. 747

9.2.2.196  DCH Enhancements Information |R12|  p. 747

9.2.2.197  DCH Enhancements Information to Modify |R12|  p. 748

9.2.2.198  DCH Enhancements Information Removal |R12|  p. 748

9.2.2.199  Gain Factors 10ms Mode |R12|  p. 749

9.2.2.200  Extended E-DPCCH Power Offset |R12|  p. 749

9.2.2.201  Radio Links without DPCH/F-DPCH Indication |R12|  p. 749

9.2.2.202  UL DPCCH2 Reconfiguration |R12|  p. 750

9.2.2.203  UL DPCCH2 Information |R12|  p. 750

9.2.2.204  UL DPCCH2 Information To Modify |R12|  p. 750

9.2.2.205  UL DPCCH2 Information Removal |R12|  p. 750

9.2.2.206  CQI Feedback Cycle2 k |R12|  p. 751

9.2.2.207  UE Measurement Forwarding |R12|  p. 751

9.2.2.208  UE Measurement Value |R12|  p. 751

9.2.2.209  TTI Update Indication |R12|  p. 751

9.2.2.210  Activation Delay |R12|  p. 751

9.2.2.211  Fast TTI switching Mode Supported |R12|  p. 752

9.2.2.212  Fast TTI switching Mode Requested Synchronized |R12|  p. 752

9.2.2.213  Fast TTI switching Mode Requested UnSynchronized |R12|  p. 752

9.2.2.214  Downlink TPC enhancements Information |R13|  p. 752

9.2.2.215  Downlink TPC enhancements Reconf |R13|  p. 752

9.2.2.216  Downlink TPC enhancements Information Removal |R13|  p. 753

9.2.2.217  TPC slot position |R13|  p. 753

9.2.2.218  E-RNTI Set |R13|  p. 753

9.2.2.219  Dual Cell E-DCH Operation Enhancements Information |R14|  p. 754

9.2.2.220  HS-SCCH DRX Information |R14|  p. 754