Content for TS 25.214 Word version: 18.0.0
4 Synchronization procedures p. 11
4.1 Cell search p. 11
4.2 Common physical channel synchronization p. 11
4.2.1 P-CCPCH radio frame timing |R6| p. 11
4.2.2 S-CCPCH soft combining timing |R6| p. 11
4.2.3 Radio frame timing on the MBSFN layer |R7| p. 12
4.2.4 Secondary serving HS-DSCH cell timing |R8| p. 12
4.2.5 HS-DSCH cell timing when Multiflow is configured |R11| p. 12
4.3 DPCCH/DPDCH/F-DPCH synchronization p. 12
4.3.1 Synchronization primitives p. 12
4.3.1.1 General p. 12
4.3.1.2 Downlink synchronization primitives p. 12
4.3.1.3 Uplink synchronization primitives p. 14
4.3.2 Radio link establishment and physical layer reconfiguration for dedicated channels p. 14
4.3.2.1 General p. 14
4.3.2.2 Node B radio link set state machine p. 15
4.3.2.3 Synchronization procedure A p. 15
4.3.2.3A Synchronization procedure AA |R8| p. 17
4.3.2.4 Synchronization procedure B p. 17
4.3.3 Radio link monitoring p. 18
4.3.3.1 Downlink radio link failure p. 18
4.3.3.2 Uplink radio link failure/restore in CELL_DCH state p. 18
4.3.3.2A Uplink radio link failure/restore in CELL_FACH state and IDLE mode |R8| p. 18
4.3.4 Transmission timing adjustments p. 18
5 Power control p. 19
5.1 Uplink power control p. 19
5.1.1 PRACH p. 19
5.1.2 DPCCH/DPDCH/DPCCH2 p. 19
5.1.2.1 General p. 19
5.1.2.2 Ordinary transmit power control p. 20
5.1.2.2.1 General p. 20
5.1.2.2.2 Algorithm 1 for processing TPC commands p. 22
5.1.2.2.3 Algorithm 2 for processing TPC commands p. 23
5.1.2.2.4 Algorithm 3 for processing TPC commands |R13| p. 24
5.1.2.2A Ordinary transmit power control for DPCCH2 |R12| p. 25
5.1.2.3 Transmit power control in compressed mode p. 26
5.1.2.3A Transmit power control in compressed mode for DPCCH2 |R12| p. 28
5.1.2.4 Transmit power control in the uplink DPCCH power control preamble p. 29
5.1.2.5 Setting of the uplink DPCCH/DPDCH relative powers p. 29
5.1.2.5.1 General p. 29
5.1.2.5.2 Signalled gain factors p. 30
5.1.2.5.3 Computed gain factors p. 30
5.1.2.5.4 Setting of the uplink DPCCH/DPDCH relative powers in compressed mode p. 30
5.1.2.5A Setting of the uplink HS-DPCCH power relative to DPCCH or DPCCH2 power |R5| p. 31
5.1.2.5B Setting of the uplink E-DPCCH and E-DPDCH powers relative to DPCCH power |R6| p. 34
5.1.2.5B.1 E-DPCCH/DPCCH when one transport block is transmitted on E-DCH p. 34
5.1.2.5B.1A E-DPCCH/DPCCH when two transport blocks are transmitted on E-DCH (rank-2) |R11| p. 35
5.1.2.5B.2 E-DPDCH/DPCCH p. 36
5.1.2.5C Setting of the uplink DPCCH gain factor when no DPDCH is configured |R6| p. 40
5.1.2.5D Setting of the uplink S-DPCCH power relative to DPCCH power |R11| p. 40
5.1.2.5D.1 Setting of the uplink S-DPCCH/DPCCH power ratio when less than two transport blocks are transmitted on E-DCH p. 40
5.1.2.5D.2 Setting of the uplink S-DPCCH/DPCCH power ratio when two transport blocks are transmitted on E-DCH (rank-2) p. 41
5.1.2.5E Setting of the uplink S-E-DPCCH power relative to DPCCH power |R11| p. 41
5.1.2.5F Setting of the uplink S-E-DPDCH power relative to E-DPDCH power |R11| p. 41
5.1.2.6 Maximum and minimum power limits p. 42
5.1.3 Void
5.2 Downlink power control p. 45
5.2.1 DPCCH/DPDCH/F-DPCH p. 45
5.2.1.1 General p. 45
5.2.1.2 Ordinary transmit power control p. 45
5.2.1.2.1 UE behaviour p. 45
5.2.1.2.2 UTRAN behaviour p. 47
5.2.1.3 Power control in compressed mode p. 48
5.2.1.4 Power scaling of DPDCH with POSRB |R12| p. 49
5.2.2 Void
5.2.3 Void
5.2.4 AICH p. 50
5.2.5 PICH p. 50
5.2.6 S-CCPCH p. 50
5.2.7 Void
5.2.8 Void
5.2.9 Void
5.2.10 HS-SCCH |R5| p. 50
5.2.11 HS-PDSCH |R5| p. 51
5.2.12 E-AGCH |R6| p. 51
5.2.13 E-HICH |R6| p. 51
5.2.14 E-RGCH |R6| p. 51
5.2.15 MICH |R6| p. 51
5.2.16 S-CPICH |R7| p. 51
5.2.17 F-TPICH |R11| p. 51
5.2.18 D-CPICH |R11| p. 51
5.2.19 E-ROCH |R11| p. 52
