Content for TS 25.212 Word version: 18.0.0
4.7 Coding for HS-DPCCH
4.8 Coding for E-DCH
4.9 Coding for E-DPCCH
4.9A Coding for S-E-DPCCH
4.10 Coding for E-AGCH
4.10A Coding for E-ROCH
4.11 Mapping for E-RGCH Relative Grant
4.12 Mapping for E-HICH ACK/NACK
A Blind transport format detection
B Compressed mode idle lengths
$ Change History
4.7 Coding for HS-DPCCH |R5| p. 103
4.7.1 Overview p. 103
4.7.2 Channel coding for HS-DPCCH when the UE is not configured in MIMO mode and not configured in MIMO mode with four transmit antennas in the serving HS-DSCH cell and Secondary_Cell_Enabled is 0 or 1 and Secondary_Cell_Active is 0 p. 108
4.7.2.1 Channel coding for HS-DPCCH HARQ-ACK |R7| p. 108
4.7.2.2 Channel coding for HS-DPCCH channel quality indication |R7| p. 108
4.7.3 Channel coding for HS-DPCCH when the UE is configured in MIMO mode in the serving HS-DSCH cell and Secondary_Cell_Enabled is 0 |R7| p. 109
4.7.3.1 Channel coding for HS-DPCCH HARQ-ACK p. 109
4.7.3.2 Channel coding for HS-DPCCH composite precoding control indication and channel quality indication p. 110
4.7.3.2.1 Bit mapping of Type A channel quality indication p. 110
4.7.3.2.2 Bit mapping of Type B channel quality indication p. 110
4.7.3.2.3 Bit mapping of precoding control indication p. 110
4.7.3.2.4 Composite precoding control indication and channel quality indication bits p. 110
4.7.3.2.5 Block encoding of composite precoding control indication and channel quality indication bits p. 111
4.7.3A Channel coding for HS-DPCCH when the UE is not configured in MIMO mode in any cell and Secondary_Cell_Enabled is 1 and Secondary_Cell_Active is 1 |R8| p. 112
4.7.3A.1 Channel coding for the composite HS-DPCCH HARQ-ACK p. 112
4.7.3A.2 Channel coding for HS-DPCCH composite channel quality indication p. 113
4.7.3B Channel coding for HS-DPCCH when Secondary_Cell_Enabled is at least 3 or when the UE is configured in MIMO mode in at least one cell and Secondary_Cell_Enabled is greater than 0 |R9| p. 114
4.7.3B.1 Channel coding for the composite HS-DPCCH HARQ-ACK p. 114
4.7.3B.2 Channel coding for HS-DPCCH composite precoding control indication and channel quality indication p. 116
4.7.3C Channel coding for HS-DPCCH when the UE is not configured in MIMO mode in any cell and Secondary_Cell_Enabled is 2 |R10| p. 116
4.7.3C.1 Channel coding for the composite HS-DPCCH HARQ-ACK p. 116
4.7.3C.2 Channel coding for HS-DPCCH channel quality indication p. 117
4.7.3D Channel coding for HS-DPCCH when the UE is configured in Multiflow mode |R11| p. 117
4.7.3D.1 Channel coding for the composite HS-DPCCH HARQ-ACK p. 117
4.7.3D.2 Channel coding for HS-DPCCH channel quality indication p. 118
4.7.3E Channel coding for HS-DPCCH when the UE is configured in MIMO mode with 4 transmit antennas |R11| p. 118
4.7.3E.1 Channel coding for HS-DPCCH when the UE is configured in MIMO mode with four transmit antennas and Secondary_Cell_Enabled is 0 |R12| p. 118
4.7.3E.1.1 Channel coding for HS-DPCCH HARQ-ACK p. 118
4.7.3E.1.2 Channel coding for HS-DPCCH composite number of transport blocks preferred, precoding control indication and channel quality indication p. 120
4.7.3E.2 Channel coding for HS-DPCCH when the UE is configured in MIMO mode with four transmit antennas in any cell and Secondary_Cell_Enabled is 1 |R12| p. 122
4.7.3E.2.1 Channel coding for the composite HS-DPCCH HARQ-ACK p. 122
4.7.3E.2.2 Channel coding for HS-DPCCH composite number of transport blocks preferred, precoding control indication and channel quality indication p. 123
4.7.3E.3 Channel coding for HS-DPCCH when the UE is configured in MIMO mode with four transmit antennas in any cell and Secondary_Cell_Enabled is 2 |R12| p. 123
4.7.3E.3.1 Channel coding for the composite HS-DPCCH HARQ-ACK p. 123
4.7.3E.3.2 Channel coding for HS-DPCCH composite number of transport blocks preferred, precoding control indication and channel quality indication p. 123
4.7.3E.4 Channel coding for HS-DPCCH when the UE is configured in MIMO mode with four transmit antennas in any cell and Secondary_Cell_Enabled is 3 |R12| p. 123
4.7.4 Physical channel mapping for HS-DPCCH |R7| p. 124
4.7.4.1 Physical Channel mapping for HS-DPCCH HARQ-ACK |R10| p. 124
4.7.4.2 Physical Channel mapping for HS-DPCCH PCI/CQI |R10| p. 127
4.7.4.3 Physical Channel mapping for HS-DPCCH HARQ-ACK and PCI/CQI when the UE is configured in Multiflow mode |R11| p. 132
4.7.4.3.1 Physical Channel mapping for HS-DPCCH HARQ-ACK and PCI/CQI when the UE is configured with one serving and one assisting serving HS-DSCH cell p. 132
4.7.4.3.2 Physical Channel mapping for HS-DPCCH HARQ-ACK and PCI/CQI when the UE is configured with two serving and one assisting serving or one serving and two assisting serving HS-DSCH cells p. 133
4.7.4.3.3 Physical Channel mapping for HS-DPCCH HARQ-ACK and PCI/CQI when the UE is configured with two serving and two assisting serving HS-DSCH cells p. 135
4.7.4.3.4 Physical Channel mapping for HS-DPCCH HARQ-ACK and PCI/CQI when the UE is configured with three serving and one assisting serving HS-DSCH cells or one serving and three assisting serving HS-DSCH cells |R13| p. 135
4.7.4.4 Physical Channel mapping for HS-DPCCH when the UE is configured in MIMO mode with four transmit antennas in at least one cell |R11| p. 137
4.8 Coding for E-DCH |R6| p. 140
4.8.1 CRC attachment for E-DCH p. 142
4.8.2 Code block segmentation for E-DCH p. 142
4.8.3 Channel coding for E-DCH p. 142
4.8.4 Physical layer HARQ functionality and rate matching for E-DCH p. 142
4.8.4.1 Determination of SF, modulation scheme and number of E-DPDCH PhCHs needed p. 142
4.8.4.1A Determination of SF, modulation scheme and number of S-E-DPDCH PhCHs needed |R11| p. 144
4.8.4.2 HARQ bit separation p. 145
4.8.4.3 HARQ Rate Matching Stage p. 145
4.8.4.4 HARQ bit collection p. 146
4.8.5 Physical channel segmentation for E-DCH p. 146
4.8.6 Interleaving for E-DCH p. 146
4.8.7 Physical channel mapping for E-DCH p. 147
4.9 Coding for E-DPCCH |R6| p. 147
4.9.1 Overview p. 148
4.9.2 E-DPCCH information field mapping p. 148
4.9.2.1 Information field mapping of E-TFCI p. 148
4.9.2.2 Information field mapping of retransmission sequence number p. 148
4.9.2.3 Information field mapping of the "Happy" bit p. 149
4.9.3 Multiplexing of E-DPCCH information p. 149
4.9.4 Channel coding for E-DPCCH p. 149
4.9.5 Physical channel mapping for E-DPCCH p. 149
4.9A Coding for S-E-DPCCH |R11| p. 150
4.9A.1 Overview p. 150
4.9A.2 S-E-DPCCH information field mapping p. 150
4.9A.2.1 Information field mapping of E-TFCI p. 150
4.9A.2.2 Information field mapping of retransmission sequence number p. 150
4.9A.2.3 Information field mapping of the Spare bit p. 150
4.9A.3 Multiplexing of S-E-DPCCH information p. 150
4.9A.4 Channel coding for S-E-DPCCH p. 150
4.9A.5 Physical channel mapping for S-E-DPCCH p. 150
4.10 Coding for E-AGCH |R6| p. 150
4.10.1 Overview p. 150
4.10.1A E-AGCH information field mapping p. 151
4.10.1A.1 Information field mapping of the Absolute Grant Value p. 151
4.10.1A.2 Information field mapping of the Absolute Grant Scope p. 153
4.10.1B Multiplexing of E-AGCH information p. 153
4.10.2 CRC attachment for E-AGCH p. 154
4.10.3 Channel coding for E-AGCH p. 154
4.10.4 Rate matching for E-AGCH p. 154
4.10.5 Physical channel mapping for E-AGCH p. 154
4.10A Coding for E-ROCH |R11| p. 154
4.10A.1 Overview p. 154
4.10A.2 E-ROCH information field mapping p. 155
4.10A.2.1 Information field mapping of the S-ETFC Offset p. 155
4.10A.2.2 Information field mapping of the Rank Indication p. 156
4.10A.3 Multiplexing of E-ROCH information p. 156
4.10A.4 CRC attachment for E-ROCH p. 156
4.10A.5 Channel coding for E-ROCH p. 157
4.10A.6 Rate matching for E-ROCH p. 157
4.10A.7 Physical channel mapping for E-ROCH p. 157
4.11 Mapping for E-RGCH Relative Grant |R6| p. 157
4.11.1 Overview p. 157
4.11.2 Relative Grant mapping p. 157
4.12 Mapping for E-HICH ACK/NACK |R6| p. 157
4.12.1 Overview p. 157
4.12.2 ACK/NACK mapping p. 157
A Blind transport format detection p. 159
A.1 Blind transport format detection using fixed positions p. 159
A.1.1 Blind transport format detection using received power ratio p. 159
A.1.2 Blind transport format detection using CRC p. 159
A.2 Blind transport format detection using pseudo-flexible positions |R12| p. 161
B Compressed mode idle lengths p. 162
$ Change History p. 164
