Content for TS 25.101 Word version: 18.0.0
3 Definitions, symbols and abbreviations
4 General
5 Frequency bands and channel arrangement
6 Transmitter characteristics
...
...
3 Definitions, symbols and abbreviations p. 15
3.1 Definitions p. 15
3.2 Abbreviations p. 17
4 General p. 19
4.1 Relationship between Minimum Requirements and Test Requirements p. 19
4.2 Power Classes p. 19
4.3 Control and monitoring functions p. 19
4.4 RF requirements in later releases p. 20
5 Frequency bands and channel arrangement p. 20
5.1 General p. 20
5.2 Frequency bands p. 20
5.3 TX-RX frequency separation p. 23
5.4 Channel arrangement p. 24
5.4.1 Channel spacing p. 24
5.4.2 Channel raster p. 24
5.4.3 Channel number p. 24
5.4.4 UARFCN p. 27
6 Transmitter characteristics p. 28
6.1 General p. 28
6.2 Transmit power p. 28
6.2.1 UE maximum output power p. 28
6.2.1A UE maximum output power for UL OLTD |R11| p. 30
6.2.1B UE maximum output power for UL CLTD |R11| p. 31
6.2.1C UE maximum output power for UL MIMO |R11| p. 32
6.2.1D UE maximum output power for DB-DC-HSUPA |R13| p. 33
6.2.2 UE maximum output, power with HS-DPCCH and E-DCH |R5| p. 34
6.2.2A UE maximum output, power for DC-HSUPA |R9| p. 34
6.2.2B UE maximum output power with HS-DPCCH and E-DCH for UL OLTD |R11| p. 35
6.2.2C UE maximum output power with HS-DPCCH and E-DCH for UL CLTD |R11| p. 36
6.2.2D UE maximum output power with HS-DPCCH and E-DCH for UL MIMO |R11| p. 36
6.2.2E UE maximum output power for the band with HS-DPCCH and E-DCH for DB-DC-HSUPA |R13| p. 37
6.2.3 UE Relative code domain power accuracy |R6| p. 37
6.2.3A UE Relative code domain power accuracy for DC-HSUPA |R9| p. 38
6.2.3B UE Relative code domain power accuracy for UL OLTD |R11| p. 39
6.2.3C UE Relative code domain power accuracy for UL CLTD |R11| p. 39
6.2.3D UE Relative code domain power accuracy for UL MIMO |R11| p. 39
6.2.3E UE Relative code domain power accuracy for DB-DC-HSUPA |R13| p. 39
6.3 Frequency Error p. 39
6.3A Frequency Error for DC-HSUPA |R9| p. 39
6.3B Frequency error for UL OLTD |R11| p. 39
6.3C Frequency error for UL CLTD |R11| p. 40
6.3D Frequency error for UL MIMO |R11| p. 40
6.3E Frequency error for DB-DC-HSUPA |R13| p. 40
6.4 Output power dynamics p. 40
6.4.1 Open loop power control p. 40
6.4.1.1 Minimum requirement p. 40
6.4.1.1A Additional requirement for DC-HSUPA |R9| p. 40
6.4.1.1B Additional requirement for DB-DC-HSUPA |R13| p. 40
6.4.2 Inner loop power control in the uplink p. 41
6.4.2.1 Power control steps p. 41
6.4.2.1.1 Minimum requirement p. 41
6.4.2.1.1A Additional requirement for DC-HSUPA |R11| p. 42
6.4.2.1.1B Additional requirement for UL OLTD |R11| p. 43
6.4.2.1.1C Additional requirement for UL CLTD |R11| p. 43
6.4.2.1.1D Additional requirement for UL MIMO |R11| p. 43
6.4.2.1.1E Additional requirement for DB-DC-HSUPA |R13| p. 43
6.4.3 Minimum output power p. 43
6.4.3.1 Minimum requirement p. 43
6.4.3.1A Additional requirement for DC-HSUPA |R9| p. 43
6.4.3.1B Additional requirement for UL OLTD |R11| p. 43
6.4.3.1C Additional requirement for UL CLTD |R11| p. 43
6.4.3.1D Additional requirement for UL MIMO |R11| p. 43
6.4.3.1E Additional requirement for DB-DC-HSUPA |R13| p. 44
6.4.4 Out-of-synchronization handling of output power p. 44
6.4A Output pattern dynamics |R11| p. 47
6.4A.1 Out-of-quality handling of TPI applicability p. 47
6.4A.1.1 Minimum requirement p. 47
6.4A.1.2 Test case p. 47
6.5 Transmit ON/OFF power p. 49
6.5.1 Transmit OFF power p. 49
6.5.1.1 Minimum requirement p. 49
6.5.1.1A Additional requirement for DC-HSUPA |R9| p. 49
6.5.1.1B Additional requirement for UL OLTD |R11| p. 50
6.5.1.1C Additional requirement for UL CLTD |R11| p. 50
6.5.1.1D Additional requirement for UL MIMO |R11| p. 50
6.5.1.1E Additional requirement for DB-DC-HSUPA |R13| p. 50
6.5.2 Transmit ON/OFF Time mask p. 50
6.5.2.1 Minimum requirement p. 50
6.5.2.1A Additional requirement for UL OLTD |R11| p. 53
6.5.2.1B Additional requirement for UL CLTD |R11| p. 53
6.5.2.1C Additional requirement for UL MIMO |R11| p. 53
6.5.2.1D Additional requirement for DB-DC-HSUPA operating simultaneously with CS |R13| p. 53
6.5.3 Change of TFC p. 53
6.5.3.1 Minimum requirement p. 54
6.5.3.1A Additional requirement for UL OLTD |R11| p. 55
6.5.3.1B Additional requirement for UL CLTD |R11| p. 55
6.5.3.1C Additional requirement for DB-DC-HSUPA operating simultaneously with CS |R13| p. 56
6.5.4 Power setting in uplink compressed mode p. 56
6.5.4.1 Minimum requirement p. 56
6.5.4.1A Additional requirement for UL OLTD |R11| p. 57
6.5.4.1B Additional requirement for UL CLTD |R11| p. 57
6.5.4.1C Additional requirement for DB-DC-HSUPA |R13| p. 58
6.5.5 HS-DPCCH |R5| p. 58
6.6 Output RF spectrum emissions p. 60
6.6.1 Occupied bandwidth p. 60
6.6.1A Occupied bandwidth for DC-HSUPA |R9| p. 61
6.6.1B Occupied bandwidth for UL OLTD |R11| p. 61
6.6.1C Occupied bandwidth for UL CLTD |R11| p. 61
6.6.1D Occupied bandwidth for UL MIMO |R11| p. 61
6.6.1E Occupied bandwidth for DB-DC-HSUPA |R13| p. 61
6.6.2 Out of band emission p. 61
6.6.2.1 Spectrum emission mask p. 61
6.6.2.1A Additional Spectrum emission mask for DC-HSUPA |R9| p. 63
6.6.2.1A.1 Minimum requirement p. 63
6.6.2.1A.2 Additional requirement for band II, IV, V, X, XXV and XXVI p. 63
6.6.2.1B Additional requirement for UL OLTD |R11| p. 64
6.6.2.1C Additional requirement for UL CLTD |R11| p. 64
6.6.2.1D Additional requirement for UL MIMO |R11| p. 64
6.6.2.1E Additional requirement for DB-DC-HSUPA |R13| p. 64
6.6.2.2 Adjacent Channel Leakage power Ratio (ACLR) p. 64
6.6.2.2.1 Minimum requirement p. 64
6.6.2.2.1A Additional requirement for DC-HSUPA |R9| p. 64
6.6.2.2.1B Additional requirement for UL OLTD |R11| p. 65
6.6.2.2.1C Additional requirement for UL CLTD |R11| p. 65
6.6.2.2.1D Additional requirement for UL MIMO |R11| p. 65
6.6.2.2.1E Additional requirement for DB-DC-HSUPA |R13| p. 65
6.6.3 Spurious emissions p. 65
6.6.3.1 Minimum requirement p. 65
6.6.3.1A Additional requirement for DC-HSUPA |R9| p. 74
6.6.3.1B Additional requirement for UL OLTD |R11| p. 80
6.6.3.1C Additional requirement for UL CLTD |R11| p. 80
6.6.3.1D Additional requirement for UL MIMO |R11| p. 80
6.6.3.1E Additional requirement for DB-DC-HSUPA |R13| p. 81
6.7 Transmit intermodulation p. 82
6.7.1 Minimum requirement p. 82
6.7.1A Additional requirement for DC-HSUPA |R9| p. 82
6.7.1B Additional requirement for UL OLTD |R11| p. 83
6.7.1C Additional requirement for UL CLTD |R11| p. 83
6.7.1D Additional requirement for UL MIMO |R11| p. 83
6.7.1E Additional requirement for DB-DC-HSUPA |R13| p. 83
6.8 Transmit modulation p. 83
6.8.1 Transmit pulse shape filter p. 83
6.8.1A Additional requirement for UL OLTD |R11| p. 83
6.8.1B Additional requirement for UL CLTD |R11| p. 83
6.8.1C Additional requirement for UL MIMO |R11| p. 84
6.8.1D Additional requirement for DB-DC-HSUPA |R13| p. 84
6.8.2 Error Vector Magnitude p. 84
6.8.2.1 Minimum requirement p. 84
6.8.2.1A Additional requirement for DC-HSUPA |R9| p. 85
6.8.2.1B Additional requirement for UL OLTD |R11| p. 85
6.8.2.1C Additional requirement for UL CLTD |R11| p. 85
6.8.2.1D Additional requirement for UL MIMO |R11| p. 86
6.8.2.1E Additional requirement for DB-DC-HSUPA |R13| p. 86
6.8.3 Peak code domain error p. 86
6.8.3.1 Minimum requirement p. 87
6.8.3.1A Additional requirement for UL OLTD |R11| p. 87
6.8.3.1B Additional requirement for UL CLTD |R11| p. 87
6.8.3.1C Additional requirement for DB-DC-HSUPA operating simultaneously with CS |R13| p. 87
6.8.3a Relative code domain error |R6| p. 87
6.8.3a.1 Relative Code Domain Error |R9| p. 87
6.8.3a.1.1 Minimum requirement |R6| p. 88
6.8.3a.1.1a Additional requirement for DC-HSUPA p. 88
6.8.3a.1.1b Additional requirement for UL OLTD |R11| p. 89
6.8.3a.1.1c Additional requirement for UL CLTD |R11| p. 89
6.8.3a.1.1d Additional requirement for UL MIMO |R11| p. 89
6.8.3a.1.1e Additional requirement for DB-DC-HSUPA |R13| p. 89
6.8.3b In-band emission for DC-HSUPA |R9| p. 89
6.8.4 Phase discontinuity for uplink DPCH |R5| p. 89
6.8.4.1 Minimum requirement p. 89
6.8.4.1A Additional requirement for UL OLTD |R11| p. 90
6.8.4.1B Additional requirement for UL CLTD |R11| p. 90
6.8.4.1C Additional requirement for DB-DC-HSUPA |R13| p. 90
6.8.5 Phase discontinuity for HS-DPCCH |R6| p. 90
6.8.5.1 Minimum requirement p. 91
6.8.5.1A Additional requirement for UL OLTD |R11| p. 91
6.8.5.1B Additional requirement for UL CLTD |R11| p. 91
6.8.6 Phase discontinuity for E-DCH |R8| p. 91
6.8.6.1 Minimum requirement p. 92
6.8.6.1A Additional requirement for UL OLTD |R11| p. 92
6.8.6.1B Additional requirement for UL CLTD |R11| p. 93
6.8.6.1C Additional requirement for DB-DC-HSUPA |R13| p. 93
6.8.7 Time alignment error for DC-HSUPA |R9| p. 93
6.8.7A Time alignment error for UL OLTD |R11| p. 93
6.8.7B Time alignment error for UL CLTD |R11| p. 93
6.8.7C Time alignment error for UL MIMO |R11| p. 93
6.8.7D Time alignment error for DB-DC-HSUPA |R13| p. 94
