Content for TS 51.010-1 Word version: 13.11.0
A1 Reference test methods
A3 Protocol implementation information
A4 Test SIM Parameters
A4A Test USIM Parameters
A5 Test equipment
A6 E-OTD Accuracy Measurement Test Environment
A7 General rules for statistical testing
A9 GAN certificate
A10 Repeated SACCH Layer 1 Test Method:
$ Change history
A1 (Normative) Reference test methods Word‑p. 5920
A1.1 General Conditions (GC)
A1.1.1 Outdoor test site and general arrangements for measurements involving the use of radiated fields (GC4)
A1.1.2 Anechoic shielded chamber (GC5)
A1.1.3 Temporary antenna connector (GC7) Word‑p. 5921
A1.1.4 Temporary antenna connector characteristics
A1.1.5 Calibration of the temporary antenna connector Word‑p. 5922
A1.1.5.1 Antenna radiation pattern
A1.1.5.2 Test range calibration Word‑p. 5924
A1.1.5.3 Temporary antenna connector coupling factor
A1.1.6 Connection of devices with multiple antennae Word‑p. 5925
A1.2 Normal and extreme Test Conditions (TC)
A2 Void
A3 Protocol implementation information Word‑p. 5929
A3.1 Protocol Implementation Conformance Statement (PICS)
A3.1.1 LAPDm protocol (3GPP TS 04.05 and 04.06)
A3.1.1.1 Simplified protocol - 3GPP TS 04.06 clause 6
A3.1.1.2 Management of SAPI = 3 - 3GPP TS 04.11 subclause 2.3
A3.1.2 Mobility management
A3.1.2.1 IMSI detach initiation by the MS - 3GPP TS 04.08 / 3GPP TS 24.008 subclause 4.3.4.1
A3.1.2.2 IMSI detach completion by the MS - 3GPP TS 04.08 / 3GPP TS 24.008 subclause 4.3.4.3
A3.1.2.3 MM specific procedures - 3GPP TS 04.08 / 3GPP TS 24.008 subclauses 4.4 and 4.5.1.1
A3.1.2.4 Receiving an MM STATUS message - 3GPP TS 04.08 / 3GPP TS 24.008 subclause 4.6
A3.1.3 Call control Word‑p. 5930
A3.1.3.1 Status enquiry procedures - 3GPP TS 04.08 / 3GPP TS 24.008 subclause 5.5.3.1
A3.1.3.2 Receiving a STATUS message by a CC entity - 3GPP TS 04.08 / 3GPP TS 24.008 subclause 5.5.3.2
A3.1.3.3 Called side compatibility checking - 3GPP TS 04.08 / 3GPP TS 24.008 clause B.3
A3.1.3.4 Disconnect on incoming call
A3.1.4 Layer 1
A3.1.5 Autocalling - (ref.: 3GPP TS 02.07, annex 1)
A3.1.6 Transient states
A3.2 Protocol Implementation Extra Information for Testing (PIXIT) Word‑p. 5931
A3.2.0 Introduction
A3.2.1 Basic characteristics
A3.2.1.1 Type of antenna
A3.2.1.2 Power supply Word‑p. 5932
A3.2.1.3 Power class of the MS
A3.2.1.4 Channel modes supported
A3.2.1.5 Teleservices supported
A3.2.1.6 Supplementary services supported
A3.2.1.7 Bearer services supported
A3.2.1.8 SIM removal Word‑p. 5933
A3.2.1.9 Classmark
A3.2.1.10 Type of SIM/ME interface (ref. 3GPP TS 11.11 and 3GPP TS 11.12) Word‑p. 5934
A3.2.1.11 Multislot class
A3.2.2 Man machine interface
A3.2.2.1 Mobile station features
A3.2.2.2 Short message service Word‑p. 5935
A3.2.2.3 Supplementary services
A3.2.3 Electrical Man Machine Interface (EMMI)
A3.2.3.1 Methods supported for activation/deactivation of EMMI
A3.2.3.2 Transmission rate supported by the ME on the EMMI
A3.2.3.3 Layer 3 messages supported on the EMMI
A3.2.3.4 Keystroke sequence messages
A3.2.3.5 Internal malfunction detected messages
A3.2.4 Digital Audio Interface (DAI)
A3.2.5 Characteristics related to bearer services or teleservices Word‑p. 5937
A3.2.5.1 Access interface
A3.2.5.2 Configuration of the MT
A3.2.5.3 Capability information
A3.2.5.4 Subaddress or DDI number
A3.2.5.5 User to user signalling
A3.2.5.6 Data call set-up and data call clearing
A3.2.5.7 Characteristics of non-transparent data services Word‑p. 5938
A3.2.5.8 Possible ways of setting-up a call from either an external interface or internally
A3.2.5.9 Application layer causing automatic call termination
A3.2.5.10 Call re-establishment for MS not supporting speech
A3.2.6 International mobile station equipment identity
A3.2.7 Receiver intermediate frequencies
A3.2.8 Artificial ear
A4 Test SIM Parameters Word‑p. 5942
A4.1 Introduction
A4.2 Default Parameters for the test SIM
A4.3 Default settings for the Elementary Files (EFs)
A4.3.1 EFICCID (ICC Identification) Word‑p. 5943
A4.3.2 EFLP (Language preference)
A4.3.3 EFIMSI (IMSI)
A4.3.4 EFKc (Ciphering key Kc)
A4.3.5 EFPLMNsel (PLMN selector)
A4.3.6 EFHPLMN (HPLMN search period) Word‑p. 5944
A4.3.7 EFACMmax (ACM maximum value)
A4.3.8 EFSST (SIM service table)
A4.3.9 EFACM (Accumulated call meter) Word‑p. 5945
A4.3.10 EFPUCT (Price per unit and currency table)
A4.3.11 EFCBMI (Cell broadcast Message Identifier Selection)
A4.3.12 EFBCCH (Broadcast control channels)
A4.3.13 EFACC (Access control class) Word‑p. 5946
A4.3.14 EFFPLMN (Forbidden PLMNs)
A4.3.15 EFLOCI (Location information)
A4.3.16 EFAD (Administrative data) Word‑p. 5947
A4.3.17 EFPhase (Phase identification)
A4.3.18 EFADN (Abbreviated dialling numbers)
A4.3.19 EFFDN (Fixed dialling numbers)
A4.3.20 EFSMS (Short messages)
A4.3.21 EFCCP (Capability configuration parameters)
A4.3.22 EFMSISDN (MSISDN)
A4.3.23 EFSMSP (Short message service parameters)
A4.3.24 EFSMSS (SMS status)
A4.3.25 EFEXT1 (Extension 1) Word‑p. 5948
A4.3.26 EFEXT2 (Extension 2)
A4.3.27 EFVGCS (Voice Group Call Service)
A4.3.28 EFVGCSS (Voice Group Call Service Status) Word‑p. 5949
A4.3.29 EFVBS (Voice Broadcast Service)
A4.3.30 EFVBSS (Voice Broadcast Service Status) Word‑p. 5950
A4.3.31 EFeMLPP (enhanced Multi Level Pre-emption and Priority)
A4.3.32 EFAAeM (Automatic Answer for eMLPP Service)
A4.3.33 EFKcGPRS (GPRS Ciphering key KcGPRS)
A4.3.34 EFLOCIGPRS (GPRS location information) Word‑p. 5951
A4A Test USIM Parameters Word‑p. 5952
A5 Test equipment Word‑p. 5953
A5.1 Introduction
A5.2 Standard test signals Word‑p. 5954
A5.3 SS functional requirements
A5.3.1 Level setting range
A5.3.2 Level Measurement / operation range
A5.3.3 MS power supply interface Word‑p. 5955
A5.3.4 MS antenna interface
A5.3.4.1 Uplink receiver error
A5.3.4.2 Power and Power versus time measurements
A5.3.4.3 Wideband selective power measurement Word‑p. 5958
A5.3.4.4 Inband selective power measurements
A5.3.4.5 Modulation accuracy and frequency error measurements Word‑p. 5959
A5.3.4.6 RF delay measurements relative to nominal times
A5.3.4.7 The wanted signal or traffic channel of serving cell
A5.3.4.8 The first interfering signal or traffic channel of the first adjacent cell Word‑p. 5961
A5.3.4.9 The second interfering signal
A5.3.4.10 BCCH carriers of serving and adjacent cells Word‑p. 5962
A5.3.4.11 The wide frequency range signal Word‑p. 5963
A5.3.4.12 The multipath fading function Word‑p. 5964
A5.3.5 MS audio interface and DAI
A5.4 SIM simulator functional requirements
A5.4.1 General
A5.4.2 Contacts C1, C2, C6, C7 Word‑p. 5965
A5.4.2.1 Default measurement / setting uncertainties
A5.4.2.2 Contact C1
A5.4.2.3 Contact C7 Word‑p. 5966
A5.4.3 Contact C3 Word‑p. 5967
A5.4.4 Definition of timing
A5.5 A-GPS and A-GNSS Minimum Performance Test System requirements
A6 E-OTD Accuracy Measurement Test Environment Word‑p. 5974
A6.1 Recommended Timing Accuracy Test Environment (Unassisted)
A6.2 Recommended Timing Accuracy Test Environment (Assisted) Word‑p. 5975
A7 General rules for statistical testing Word‑p. 5979
A7.1 Statistical testing of receiver performance
A7.1.1 Basics
A7.1.1.1 Definition of (error) events
A7.1.1.2 Test Method
A7.1.1.3 Test Criteria
A7.1.1.4 Calculation assumptions Word‑p. 5980
A7.1.2 Definition of good pass fail decision Word‑p. 5981
A7.1.3 Implementation Word‑p. 5982
A7.1.4 Good balance between test time and statistical significance Word‑p. 5985
A7.1.5 Minimum and maximum expected duration of tests Word‑p. 5986
A7.2 Statistical testing of 2 D position error and TTFF for A-GPS and A-GNSS Minimum Performance test cases
A7.2.1 Test Method
A7.2.2 Error Ratio (ER) Word‑p. 5987
A7.2.3 Test Design
A7.2.3.1 Confidence level
A7.2.3.2 Introduction: Supplier Risk versus Customer Risk
A7.2.3.3 Supplier Risk versus Customer Risk Word‑p. 5988
A7.2.3.4 Introduction: Standard test versus early decision concept
A7.2.3.5 Standard test versus early decision concept Word‑p. 5989
A7.2.3.6 Selectivity
A7.2.3.7 Design of the test Word‑p. 5990
A7.2.4 Pass fail decision Word‑p. 5991
A8 Void
A9 (Normative) GAN certificate Word‑p. 5994
A10 Repeated SACCH Layer 1 Test Method: Word‑p. 5995
$ Change history Word‑p. 5998
