tech-invite   World Map     

3GPP     Specs     Glossaries     Architecture     IMS     UICC       IETF     RFCs     Groups     SIP     ABNFs       Search

Top        in Index        Prev        Next

TS 37.145-1 (RAN4)
Active Antenna System (AAS) Base Station (BS) conformance testing –
Part 1: Conducted conformance testing

|   ToC   |   3GPP‑Page   |   ETSI‑search   |   Help   |

(P) V14.2.0    2017/09    xx p.       (P) V14.1.0    2017/06    294 p.
(P) V13.4.0    2017/09    xx p.       (P) V13.3.0    2017/06    294 p.


Rapporteur:  Mr. Kybett, Richard AAS-related TS/TR     –


The present document specifies the conducted test methods and conformance requirements for single RAT E-UTRA operation, single RAT UTRA operation (FDD and TDD) and Multi-Standard Radio (MSR) UTRA and E-UTRA Active Antenna System (AAS) Base Station (BS). These have been derived from, and are consistent with the non-AAS BS specifications in TS 25.104, TS 25.105, TS 36.104 or TS 37.104. The technical specification TS 37.145 is in 2 parts, part TS 37.145-1 (the present document) covers conducted requirements and part TS 37.145-2 covers radiated requirements.

The present document does not establish conducted test methods and conformance requirements for Band 46 operation as it is not supported by AAS BS, but Band 46 test requirements are still applicable for AAS BS for protection of and against Band 46 operation.

The present document does not establish conducted test methods and conformance requirements for Narrow-Band Internet of Things (NB-IoT) in band, NB-IoT guard band, or standalone NB-IoT operation, for AAS BS in single RAT E-UTRA operation as defined in TS 36.141, or for AAS BS in MSR operation using E-UTRA as defined in TS 37.141.


 

Here        Top        None        None        Next
part:    1     2     3     4     5

 

 

1   Scope   PDF-p. 13
2   References
3   Definitions, symbols and abbreviations   PDF-p. 15
4   General test conditions and declarations   PDF-p. 22
4.1   Measurement uncertainties and test requirements
4.2   Conducted and radiated requirement reference points   PDF-p. 27
4.3   Base station classes for AAS BS
4.4   Regional requirements   PDF-p. 28
4.5   Operating bands and band categories   PDF-p. 29
4.6   Channel arrangements
4.7   Requirements for AAS BS capable of multi-band operation
4.8   AAS BS configurations   PDF-p. 30      Up
4.9   Capability sets
4.10   Manufacturer declarations for AAS BS testing   PDF-p. 32
4.11   Test signal configurations for AAS BS   PDF-p. 36
4.11.1   General
4.11.2   Test signal configurations   PDF-p. 37
4.12   RF channels and test models   PDF-p. 44
4.13   Format and interpretation of tests
5   Applicability of Requirements   PDF-p. 46

Up        Top        ToC