tech-invite   World Map     

IETF     RFCs     Groups     SIP     ABNFs    |    3GPP     Specs     Glossaries     Architecture     IMS     UICC    |    search

Top          in Index          Prev          Next

TS 36.508 (RAN5)
E-UTRA and EPC – Common test environments for UE conformance testing

|   ToC   |   3GPP‑Page   |   ETSI‑search   |   Help   |

(W-zip) V14.0    2016/12    855 p.
(P) V13.2    2016/12    901 p.
(P) V12.11    2016/09    34 p.
(P) V11.4    2014/03    27 p.
(P) V10.5    2013/06    24 p.
(P) V9.9    2012/06    20 p.
(P) V8.6    2010/06    13 p.


Rapporteur:  Mr. John, Jacob
See also:  –


The definition of the Conformance Tests for UE in E-UTRAN will be a complex task as the complete test suite covers RF, EMC and Protocol aspects of the UE.

Each test requires a Test Environment to be defined in which the UE has to operate to defined standards, constraints and performance. The overall task can be simplified if there are a number of well defined and agreed Common Test Environments where every one can be used for a number of tests. Hence the present document defines testing conditions that are common to several tests avoiding the need to duplicate the same information for every single test.

This TS defines default values for a variety of common areas. Where values are not specified in test cases, the defaults in the present document will apply. If specified, the test case values will take precedence.

This TS contains definitions of reference conditions and test signals, default parameters, reference radio bearer configurations used in radio bearer interoperability testing, common radio bearer configurations for other test purposes, common requirements for test equipment and generic set-up procedures for use in conformance tests for the 3rd Generation E-UTRAN User Equipment (UE).


 

Here          Top          None          None          Next

 

 

1   Scope   PDF-p. 24
2   References
3   Definitions, symbols and abbreviations   PDF-p. 27
4   Common test environment   PDF-p. 28
4.1   Environmental conditions
4.2   Common requirements of test equipment   PDF-p. 29      Up
4.3   Reference test conditions   PDF-p. 32
4.3.1   Test frequencies
4.3.1.1   FDD Mode Test frequencies   PDF-p. 36      Up
4.3.1.1.1   FDD reference test frequencies for operating band 1
4.3.1.1.1A   FDD reference test frequencies for CA in operating band 1
4.3.1.1.2   FDD reference test frequencies for operating band 2   PDF-p. 37
4.3.1.1.2A   FDD reference test frequencies for CA in operating band 2
4.3.1.1.3   FDD reference test frequencies for operating band 3   PDF-p. 39
4.3.1.1.3A   FDD reference test frequencies for CA in operating band 3
4.3.1.1.4   FDD reference test frequencies for operating band 4   PDF-p. 40
4.3.1.1.4A   FDD reference test frequencies for CA in operating band 4   PDF-p. 41
4.3.1.1.5   FDD reference test frequencies for operating band 5   PDF-p. 42
4.3.1.1.5A   FDD reference test frequencies for CA in operating band 5      Up
4.3.1.1.6   FDD reference test frequencies for operating band 6   PDF-p. 43
4.3.1.1.7   FDD reference test frequencies for operating band 7
4.3.1.1.7A   FDD reference test frequencies for CA in operating band 7   PDF-p. 44
4.3.1.1.8   FDD reference test frequencies for operating band 8   PDF-p. 45
4.3.1.1.8A   FDD reference test frequencies for CA in operating band 8   PDF-p. 46
4.3.1.1.9   FDD reference test frequencies for operating band 9
4.3.1.1.10   FDD reference test frequencies for operating band 10
4.3.1.1.11   FDD reference test frequencies for operating band 11   PDF-p. 47
4.3.1.1.12   FDD reference test frequencies for operating band 12
4.3.1.1.12A   FDD reference test frequencies for CA in operating band 12      Up
4.3.1.1.13   FDD reference test frequencies for operating band 13
4.3.1.1.14   FDD reference test frequencies for operating band 14   PDF-p. 48
4.3.1.1.15   FDD reference test frequencies for operating band 15
4.3.1.1.16   FDD reference test frequencies for operating band 16
4.3.1.1.17   FDD reference test frequencies for operating band 17
4.3.1.1.18   FDD reference test frequencies for operating band 18
4.3.1.1.19   FDD reference test frequencies for operating band 19   PDF-p. 49
4.3.1.1.20   FDD reference test frequencies for operating band 20
4.3.1.1.21   FDD reference test frequencies for operating band 21
4.3.1.1.22   FDD reference test frequencies for operating band 22   PDF-p. 50      Up
4.3.1.1.23   FDD reference test frequencies for operating band 23
4.3.1.1.23A   FDD reference test frequencies for CA in operating band 23
4.3.1.1.24   FDD reference test frequencies for operating band 24   PDF-p. 51
4.3.1.1.25   FDD reference test frequencies for operating band 25
4.3.1.1.25A   FDD reference test frequencies for CA in operating band 25   PDF-p. 52
4.3.1.1.26   FDD reference test frequencies for operating band 26
4.3.1.1.27   FDD reference test frequencies for operating band 27   PDF-p. 53
4.3.1.1.27A   FDD reference test frequencies for CA in operating band 27
4.3.1.1.28   FDD reference test frequencies for operating band 28   PDF-p. 54
4.3.1.1.29   FDD reference test frequencies for CA in operating band 29   PDF-p. 55      Up
4.3.1.1.31   FDD reference test frequencies for operating band 31
4.3.1.1.32   FDD reference test frequencies for CA in operating band 32
4.3.1.1.33   Void
4.3.1.1.65   FDD reference test frequencies for operating band 65   PDF-p. 56
4.3.1.1.66   FDD reference test frequencies for operating band 66
4.3.1.1.66A   FDD reference test frequencies for CA in operating band 66   PDF-p. 57
4.3.1.1.67   FDD reference test frequencies for CA in operating band 67   PDF-p. 60
4.3.1.2   TDD Mode Test frequencies   PDF-p. 61
4.3.1.3   HRPD Test frequencies
4.3.1.4   1xRTT Test frequencies
4.3.1.5   MFBI Test frequencies
4.3.1.5.1   MFBI Test frequencies for operation band 2 overlapping with band 25   PDF-p. 80
4.3.1.5.2   MFBI Test frequencies for operation band 3 overlapping with band 9
4.3.1.5.3   MFBI Test frequencies for operation band 4 overlapping with band 10
4.3.1.5.4   MFBI Test frequencies for operation band 5 overlapping with band 18
4.3.1.5.5   MFBI Test frequencies for operation band 5 overlapping with band 19   PDF-p. 81
4.3.1.5.6   MFBI Test frequencies for operation band 5 overlapping with band 26
4.3.1.5.7   MFBI Test frequencies for operation band 9 overlapping with band 3      Up
4.3.1.5.8   MFBI Test frequencies for operation band 10 overlapping with band 4
4.3.1.5.9   MFBI Test frequencies for operation band 12 overlapping with band 17
4.3.1.5.10   MFBI Test frequencies for operation band 17 overlapping with band 12   PDF-p. 82
4.3.1.5.11   MFBI Test frequencies for operation band 18 overlapping with band 5
4.3.1.5.12   MFBI Test frequencies for operation band 18 overlapping with band 26
4.3.1.5.13   MFBI Test frequencies for operation band 18 overlapping with band 27
4.3.1.5.14   MFBI Test frequencies for operation band 19 overlapping with band 5
4.3.1.5.15   MFBI Test frequencies for operation band 19 overlapping with band 26
4.3.1.5.16   MFBI Test frequencies for operation band 25 overlapping with band 2   PDF-p. 83
4.3.1.5.17   MFBI Test frequencies for operation band 26 overlapping with band 5      Up
4.3.1.5.18   MFBI Test frequencies for operation band 26 overlapping with band 18
4.3.1.5.19   MFBI Test frequencies for operation band 26 overlapping with band 19   PDF-p. 84
4.3.1.5.20   MFBI Test frequencies for operation band 26 overlapping with band 27
4.3.1.5.21   MFBI Test frequencies for operation band 27 overlapping with band 18   PDF-p. 85
4.3.1.5.22   MFBI Test frequencies for operation band 27 overlapping with band 26
4.3.1.5.23   MFBI Test frequencies for operation band 33 overlapping with band 39
4.3.1.5.24   MFBI Test frequencies for operation band 38 overlapping with band 41
4.3.1.5.25   MFBI Test frequencies for operation band 39 overlapping with band 33
4.3.1.5.26   MFBI Test frequencies for operation band 41 overlapping with band 38   PDF-p. 86
4.3.1.6   WLAN Test frequencies      Up
4.3.2   Radio conditions
4.3.3   Physical channel allocations
4.3.4   Signal levels
4.3.5   Standard test signals
4.3.6   Physical layer parameters
4.4   Reference system configurations   PDF-p. 103
4.4.1   Simulated network scenarios
4.4.2   Simulated cells      Up
4.4.3   Common parameters for simulated E-UTRA cells   PDF-p. 107
4.4.3.1   Common configurations of system information blocks
4.4.3.2   Common contents of system information messages   PDF-p. 116
4.4.3.3   Common contents of system information blocks   PDF-p. 125
4.4.3.4   Channel-bandwidth-dependent parameters in system information blocks      Up
4.4.4   Common parameters for simulated UTRA cells   PDF-p. 158
4.4.5   Common parameters for simulated GERAN cells   PDF-p. 162
4.4.6   Common parameters for simulated CDMA2000 cells   PDF-p. 165
4.4.7   Default parameters specific for simulated cells
4.4.8   Common parameters for simulated WLAN AP's   PDF-p. 180

Up          Top          ToC