tech-invite   World Map     

IETF     RFCs     Groups     SIP     ABNFs    |    3GPP     Specs     Glossaries     Architecture     IMS     UICC    |    search

Top          in Index          Prev          Next

TS 36.104 (RAN4)
E-UTRA – Base Station radio transmission and reception

|   ToC   |   3GPP‑Page   |   ETSI‑search   |   Help   |

(W-zip) V14.1    2016/09    211 p.
(P) V13.5    2016/09    221 p.
(P) V12.11    2016/03    169 p.
(P) V11.15    2016/03    150 p.
(P) V10.11    2013/07    117 p.
(P) V9.13    2012/09    99 p.
(P) V8.13    2012/07    79 p.


Rapporteur:  Mr. Skold, Johan
See also:  TS 25.104 (UTRA FDD)     TS 25.105 (UTRA TDD)     TS 37.104 (MSR)    


This TS establishes the minimum RF characteristics and minimum performance requirements of E-UTRA Base Station (BS).



click  here  to see the ToC for advanced Rel-14 Word version

 

Here          Top

 

 

1   Scope [R8]   PDF-p. 9
2   References [R8]
3   Definitions, symbols and abbreviations [R8]   PDF-p. 10
4   General [R8]   PDF-p. 16
5   Operating bands and channel arrangement [R8]
6   Transmitter characteristics [R8]
6.1   General
6.2   Base station output power   PDF-p. 42
6.3   Output power dynamics   PDF-p. 46      Up
6.4   Transmit ON/OFF power
6.5   Transmitted signal quality
6.6   Unwanted emissions      Up
6.6.1   Occupied bandwidth
6.6.2   Adjacent Channel Leakage power Ratio (ACLR)
6.6.3   Operating band unwanted emissions   PDF-p. 55
6.6.4   Transmitter spurious emissions   PDF-p. 75
6.7   Transmitter intermodulation   PDF-p. 99
7   Receiver characteristics [R8]   PDF-p. 101      Up
8   Performance requirement [R8]   PDF-p. 140      Up
8.1   General
8.2   Performance requirements for PUSCH   PDF-p. 141
8.3   Performance requirements for PUCCH   PDF-p. 164
8.3.1   DTX to ACK performance
8.3.2   ACK missed detection requirements for single user PUCCH format 1a   PDF-p. 165
8.3.3   CQI performance requirements for PUCCH format 2   PDF-p. 166
8.3.4   ACK missed detection requirements for multi user PUCCH format 1a
8.3.5   ACK missed detection requirements for PUCCH format 1b with Channel Selection [R10]   PDF-p. 167
8.3.6   ACK missed detection requirements for PUCCH format 3 [R10]
8.3.7   NACK to ACK requirements for PUCCH format 3 [R10]   PDF-p. 168
8.3.8   CQI performance requirements for PUCCH format 2 with DTX detection [R11]   PDF-p. 169
8.3.9   PUCCH performance requirements for supporting Cat-M1 UEs [R13]
8.3.10   ACK missed detection requirements for PUCCH format 4 [R13]   PDF-p. 171
8.3.11   ACK missed detection requirements for PUCCH format 5 [R13]
8.4   Performance requirements for PRACH
8.5   Performance requirements for Narrowband IoT [R13]   PDF-p. 175
9   Channel access procedures [R13]   PDF-p. 178      Up
A  (Normative)   Reference measurement channels [R8]   PDF-p. 179
B  (Normative)   Propagation conditions [R8]   PDF-p. 188
C  (Normative)   Characteristics of the interfering signals [R8]   PDF-p. 198      Up
D  (Normative)   Environmental requirements for the BS equipment [R8]   PDF-p. 199
E  (Normative)   Error Vector Magnitude [R8]   PDF-p. 200
F   Unwanted emission requirements for multi-carrier BS [R8]   PDF-p. 206
G   Regional requirement for protection of DTT [R9]   PDF-p. 207
H   Calculation of EIRP based on manufacturer declarations and site specific conditions [R12]   PDF-p. 210
I   Change history   PDF-p. 211      Up

Up          Top