tech-invite   World Map
3GPP     Specs     Glossaries     Architecture     IMS     UICC       IETF     RFCs     Groups     SIP     ABNFs       Search     Home
Top        in Index        Prev        Next

TS 29.016 (CT1)
SGSN-VLR Gs interface –
Network service

|   ToC   |   3GPP‑Page   |   ETSI‑search   |   Help   |

(P) V14.0.0    2017/03    23 p.
(P) V13.0.0    2015/12    23 p.
(P) V12.0.0    2014/09    23 p.
(P) V11.0.0    2012/09    23 p.
(P) V10.0.0    2011/03    23 p.
(P) V9.0.0    2009/12    23 p.
(P) V8.0.0    2008/12    23 p.
(P) V7.0.0    2007/06    23 p.
(P) V6.0.0    2005/01    23 p.
(P) V5.0.0    2002/06    23 p.
(P) V4.1.0    2002/06    23 p.
(P) V3.1.0    2000/10    23 p.
(P) GSM Rel-98 v7.0.1    1999/07    23 p.
(P) GSM Rel-97 v6.1.0    1999/02    16 p.


Rapporteur:  Mr. Aghili, Behrouz
Antecedent:  TS 09.16    


This TS specifies or references the subset of MTP and SCCP which is used for the reliable transport of BSSAP+ messages in the Gs interface.

Clause 5 of the present document deals with the subset of the MTP that is required between an SGSN and a VLR. It is intended that this implementation of MTP is compatible with a full MTP implementation. Clause 4 references the TS 29.202 which specifies alternatives to the MTP.

The SCCP is used to provide message routing between the SGSN and the VLR. The SCCP routing principles specified in the present document allow to connect one SGSN to several VLR. No segmentation at SCCP level is needed on the Gs interface. Only SCCP class 0 is used on the Gs interface. Clauses 6 and 7 identify the SCCP subset that should be used between an SGSN and an VLR.


 

Here        Top

 

 

1   Scope   PDF-p. 5
2   References
3   Definitions, symbols and abbreviations   PDF-p. 7
4   Configuration of the Gs interface
5   Conformance to message transfer part (MTP)
6   Conformance to SCCP   PDF-p. 16
7   Use of the SCCP (E1/T1 Interface)   PDF-p. 20
A   Change history   PDF-p. 21

Up        Top